This European Standard specifies the safety and performance requirements and tests methods for the components for supply systems. Their intended use is the supply with liquid fuel for one or more consuming units from one or more tanks.
This European Standard applies to pressurised, negative pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply liquid fuels.
The components for supply systems covered by this standard are piping kits/systems and their components.
Not covered by this standard are items belonging to the consuming unit (e. g.: heating/cooling appliances in buildings) and items used for the mounting and support of components.
Not covered by this standard are items with the intended use of gas for building heating/cooling systems and any items of heating networks.
Not covered are items used for drainage (including highways) and disposal of other liquids and gaseous waste, supply of gases, pressure and vacuum systems, communications, sanitary and cleaning fixtures and storage fixtures.

  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is applicable to the processes relating to the preparing for re-use of WEEE.
NOTE 1   This European Standard covers the preparing for re-use of WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU.
This European Standard is applicable to preparing for re-use operators only and does not cover activities connected with used or second-hand equipment that have not become waste. It applies to all preparing for re-use operators, no matter their size or main focus of activity.
This European Standard assists in quantifying re-use, recycling and recovery rates in conjunction with EN 50625-1.
In case of treatment operations (including the collection and logistics of WEEE) other than preparing for re-use the EN 50625 series applies.
Preparing for re-use processes can include the removal of whole components or parts where they are intended to either be used in the repair of faulty equipment or sold as re-use parts.
The following EEE are not in the scope of this standard:
-    industrial monitoring and control instruments;
-    in vitro diagnostic medical devices, medical devices or active implantable devices.
NOTE 2   Examples of industrial monitoring and control instruments include equipment intended for use in potentially explosive atmospheres, and monitoring and control equipment that performs a safety function as part of industrial control system.
NOTE 3   In vitro diagnostic medical devices, medical devices and active implantable devices have the capacity to collect and harbour pathogens, depending on the environment in which they operated. It is essential to follow clinically proven means for decontamination. Relevant Directives are 93/42/EEC and 98/79/EC.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to the processes relating to the preparing for re-use of WEEE. NOTE 1 This document covers the preparing for re-use of WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This document is applicable to preparing for re-use operators only and does not cover activities connected with used or second-hand equipment that have not become waste. It applies to all preparing for re-use operators, no matter their size or main focus of activity. This document assists in quantifying re-use, recycling and recovery rates in conjunction with EN 50625 1. In case of treatment operations (including the collection and logistics of WEEE) other than preparing for re-use, the EN 50625 series applies. Preparing for re-use processes includes the removal of whole components or parts where they are intended to either be used in the repair of faulty equipment or sold as re-use parts. The following EEE are not in the scope of this document: - industrial monitoring and control instruments; - in vitro diagnostic medical devices, medical devices or active implantable devices. NOTE 2 Examples of industrial monitoring and control instruments include equipment intended for use in potentially explosive atmospheres, and monitoring and control equipment that performs a safety function as part of industrial control system. NOTE 3 in vitro diagnostic medical devices, medical devices and active implantable devices have the capacity to collect and harbour pathogens, depending on the environment in which they operated. It is essential to follow clinically proven means for decontamination. Relevant Directives are 93/42/EEC and 98/79/EC.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Clause 1 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of part 1 is replaced with the following:
This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4.
The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2.
This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed.
This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of photovoltaic panels. This European Standard applies to all facilities including those whose treatment operations using mobile treatment installation.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of part 1 is replaced with the following: This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4. The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2. This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed. This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of photovoltaic panels. This European Standard applies to all facilities including those whose treatment operations using mobile treatment installation.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Clause 1 is replaced with the following: This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is applicable to the treatment of waste temperature exchange equipment and other WEEE containing VFC or VHC in refrigerants or blowing agents.
This European Standard applies to the treatment of temperature exchange equipment until end-of-waste status is fulfilled, or temperature exchange equipment fractions are recycled, recovered, or disposed of.
This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of temperature exchange equipment.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE.
NOTE 1   For the treatment of WEEE EN 50625-1 applies.
This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A).
All chemical and metallurgical processes are included up and until the output materials will be used for their original purpose or for other purposes or will be finally disposed of.
NOTE 2   The main precious metals concerned are gold, silver, and palladium.
NOTE 3   The majority of the WEEE volumes that are processed by final treatment operators consists of fractions of WEEE (e.g. circuit boards) containing copper and/or precious metals, however there may be whole small WEEE that can be treated directly in final treatment (e.g. USB sticks).
NOTE 4   Chemical and metallurgical processes are processes in which a chemical reaction takes place for example: pyrolysis, smelting, refining, solvent extraction, ion exchange, leaching/dissolution in water acids or base, precipitation, cementation, pressure leaching. They differ from mechanical / physical processes such as sorting and separation based on physical properties (e.g. density, magnetism, colour) and size reduction processes such as shredding and grinding.
NOTE 5   In general, these final treatment facilities are covered by the IED 2010/75/EU, e.g. copper smelters or refiners.

  • Technical specification
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

  • Technical specification
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General, CLC/TS 50625-3-1.

  • Technical specification
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility.
This Technical Specification addresses all operators that perform collection and logistics operations.
This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection or logistics facilities the Standard EN 50625-1 applies.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE. NOTE 1 For the treatment of WEEE EN 50625-1 applies. This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A). All chemical and metallurgical processes are included up and until the output materials will be used for their original purpose or for other purposes or will be finally disposed of. NOTE 2 The main precious metals concerned are gold, silver, and palladium. NOTE 3 The majority of the WEEE volumes that are processed by final treatment operators consists of fractions of WEEE (e.g. circuit boards) containing copper and/or precious metals, however there may be whole small WEEE that can be treated directly in final treatment (e.g. USB sticks). NOTE 4 Chemical and metallurgical processes are processes in which a chemical reaction takes place for example: pyrolysis, smelting, refining, solvent extraction, ion exchange, leaching/dissolution in water acids or base, precipitation, cementation, pressure leaching. They differ from mechanical / physical processes such as sorting and separation based on physical properties (e.g. density, magnetism, colour) and size reduction processes such as shredding and grinding. NOTE 5 In general, these final treatment facilities are covered by the IED 2010/75/EU, e.g. copper smelters or refiners.

  • Technical specification
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following: This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General, CLC/TS 50625-3-1.

  • Technical specification
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

  • Technical specification
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is applicable to the treatment of waste temperature exchange equipment and other WEEE containing VFC or VHC in refrigerants or blowing agents. This European Standard applies to the treatment of temperature exchange equipment until end-of-waste status is fulfilled, or temperature exchange equipment fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of temperature exchange equipment.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility. This Technical Specification addresses all operators that perform collection and logistics operations. This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection or logistics facilities the Standard EN 50625-1 applies.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard is applicable to the treatments of WEEE containing CRTs and flat panel
displays.
This European standard applies to the treatment of WEEE containing CRTs and flat panel displays
until end-of-waste status is fulfilled, or fractions are recycled, recovered, or disposed of.
This European standard addresses all operators involved in the treatment including related handling,
sorting, and storage.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

  • Technical specification
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is replaced by the following: This European standard is applicable to the treatments of WEEE containing CRTs and flat panel displays. This European standard applies to the treatment of WEEE containing CRTs and flat panel displays until end-of-waste status is fulfilled, or fractions are recycled, recovered, or disposed of. This European standard addresses all operators involved in the treatment including related handling, sorting, and storage.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is replaced by the following:
This European standard is applicable to the treatment of lamps.
This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of.
This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use mobile equipment.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN50574:2012 covering collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons is currently in use.  In order to compare the collected results according to the described de-pollution efficiency assessment methodology it is necessary to develop normative requirements, such as targets, limits, characteristic numbers, monitoring requirements, sampling and analytical methods.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

  • Technical specification
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This clause of Part 1 is replaced by the following: This European standard is applicable to the treatment of lamps. This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use mobile equipment.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, recovered, or disposed of. This standard addresses all operators involved in the treatment including related handling, sorting, and storage of WEEE.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the safety and performance requirements and tests methods for the components for supply systems. Their intended use is the supply with liquid fuel for one or more consuming units from one or more tanks.
This European Standard applies to pressurised, negative pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply liquid fuels.
The components for supply systems covered by this standard are piping kits/systems and their components.
Not covered by this standard are items belonging to the consuming unit (e. g.: heating/cooling appliances in buildings) and items used for the mounting and support of components.
Not covered by this standard are items with the intended use of gas for building heating/cooling systems and any items of heating networks.
Not covered are items used for drainage (including highways) and disposal of other liquids and gaseous waste, supply of gases, pressure and vacuum systems, communications, sanitary and cleaning fixtures and storage fixtures.

  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a marking • of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE); NOTE This is in addition to the marking requirement in Article 10(3) of this Directive which requires producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a ‘crossed-out wheeled bin’ symbol. • that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/EC, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products, which fall under the categories set out in Annex IA of this Directive; • that serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005. The definition of a technical carrier medium for identifying the producer, such as a barcode, electronic data medium or microchip, is not covered by this standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

EN 50574:2012 gives the responsible take-back parties the task of defining target values. This Technical Specification provides applicable target values, characteristic numbers; sampling and analysis procedures, as well as monitoring and reporting requirements. Furthermore, this Technical Specification provides validation methodologies for tests and the daily business of the treatment plants as defined in EN 50574:2012.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines requirements for the end of life handling, transportation, storage, sorting and treatment of WEEE household appliances containing volatile fluorocarbons, volatile hydrocarbons, or both. Furthermore, this standard only applies to WEEE household appliances that use heat-transfer media other than water e.g. refrigerators, freezers, heat pump tumble dryers, de-humidifiers and portable air conditioners. Discarded appliances covered by this standard will have been deposited at a collection facility as domestic WEEE. The European Standard describes requirements for the removal of volatile fluorocarbons and volatile hydrocarbons. These substances can be found as refrigerant in the refrigerating system (partly dissolved in the oil) and as blowing agent in the insulation foam of discarded household appliances. NOTE This standard has been prepared to fulfil the requirements of Directive 2002/96/EC but does not preclude the procedures described herein from being used to treat appliances that are not commonly found in private households. It defines requirements pertaining to producers, WEEE compliance schemes (acting on behalf of producers) and waste treatment facilities so as to ensure the provisions of applicable national laws resulting from European legislation are fulfilled. These requirements are intended to define procedures, parameters based on the best available technologies at the time of the publication; however, provisions laid down by national regulatory bodies will continue to additionally apply. This standard only describes the results to be achieved, it does not specify how they are to be achieved nor does it prescribe the use of any specific technology. This European Standard does not generally cover collection facilities, nor does it cover how appliances arrive at these facilities. However, this standard does address the sorting of heat-pump tumble dryers from other types of tumble dryer, a task that could be performed at a collection facility. This European Standard defines requirements relating to handling, transportation, sorting and treatment of WEEE covered by the scope of this standard. This standard does not include any activity prior to delivery to a logistic facility.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day