IEC 62828-4:2020 establishes specific procedures for testing level transmitters used in measuring and control systems for industrial process and machinery control systems. For general test procedures, reference is to be made to IEC 62828-1:2017, applicable to all types of transmitters.
Throughout this document, the term "industrial transmitters" covers all types of transmitters used in measuring and control systems for industrial processes and for machinery.
The requirements of this document a...
view more

    • sale 15% off
    • Standard
      116 pages
      English and French language

IEC 62828-5:2020 establishes specific procedures for testing flow transmitters used in measuring and control systems for industrial process and for machinery control systems. For general test procedures, reference is to be made to IEC 62828-1:2017, applicable to all types of industrial and process measurement transmitters.
This document – together with IEC 62828-1:2017 – is the reference standard for testing every type of flow transmitter, not only for liquids but also for gases and for steam.
...
view more

    • sale 15% off
    • Standard
      70 pages
      English and French language

The object of this document is to determine the composition, nature of materials, manufacturing tests and thermoelectronic behaviour of connectors for sensors using thermocouples according to EN 60584-3:2008.This document does not cover such special thermocouples as U, L and W types; nevertheless, the user of such special thermocouples can use the connectors described hereafter with some restrictions mentioned in the relevant paragraphs.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

IEC 61788-4 specifies a test method for the determination of the residual resistanceratio (RRR) of Nb-Ti and Nb3Sn composite superconductors with Cu, Cu-Ni, Cu/Cu-Ni and Almatrix in a strain-free condition and zero external magnetic field. This method is intended foruse with superconductor specimens that have a monolithic structure with rectangular or roundcross-section, RRR value less than 350, and cross-sectional area less than 3 mm2. In the caseof Nb3Sn, the specimens have received a reaction...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

IEC 63144-1:2020(E) applies, in the field of metrology, to the statement and testing of technical data in datasheets and instruction manuals for thermographic cameras that are used to measure the temperature of surfaces. This includes, unless otherwise stated, both two-dimensional and one-dimensional (line cameras or line scanners) temperature measuring instruments, independently of the scanning principle (fixed multi-element detector or scanning camera system).
This document describes standard...
view more

    • sale 15% off
    • Technical specification
      44 pages
      English language

This European Standard specifies initial verification tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

EN-ISO 11357-2 specifies methods for the determination of the glass transition temperature and the step height related to the glass transition of amorphous and partially crystalline plastics.

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document gives names, symbols, definitions and units for quantities of thermodynamics. Where
appropriate, conversion factors are also given.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This document provides general methods for measurement and calculation of quantities associated with human exposure to electromagnetic fields in the frequency range from 0 Hz to 300 GHz. It is intended specifically to be used for the assessment of emissions from products and comparison of these with the exposure limits for the general public given in Council Recommendation 1999/519/EC, and those given for workers in Directive 2013/35/EU, as appropriate. It also is intended to be used for assessm...view more

    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day

This document gives names, symbols, definitions and units for quantities of thermodynamics. Where appropriate, conversion factors are also given.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

IEC 61869-14:2018 provides all requirements specific to current transformers to be used in DC applications (DCCTs), whatever the technology used. The output signal can be analogue or digital. It is applicable to newly manufactured current transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV. The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016. The DCCTs ...view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies commissioning, operational monitoring and maintenance and applies to thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies commissioning, operational monitoring and maintenance and applies to thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies initial verification tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the constructional requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Sta...
view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the general requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard.
...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies pattern approval tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard.
S...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the constructional requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Sta...
view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies pattern approval tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of heat in legal units.
Electrical safety requirements are not covered by this European Standard.
Pressure safety requirements are not covered by this European Standard.
S...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day