29.045 - Semiconducting materials
ICS 29.045 Details
Semiconducting materials
Halbleitende Stoffe
Materiaux semi-conducteurs
Polprevodniški materiali
General Information
IEC 62899-503-3:2021(E) specifies a measuring method of contact resistance for printed thin film transistors (TFTs) by the transfer length method (TLM). The method requires the fabrication of a test element group (TEG) with varying channel length (L) between source and drain electrodes. The method is intended for quality assessment of TFT electrode contacts and is suited for determining whether the contact resistance lies within a desired range.
- Standard13 pagesEnglish languagesale 15% off
IEC 62899-503-1:2020(E) specifies a test method for displacement current measurement (DCM) for printed thin film transistors (TFTs) or organic thin film transistors (OTFTs).
- Standard15 pagesEnglish languagesale 15% off
IEC TR 60146-1-2:2019 is available as IEC TR 60146-1-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 60146-1-2:2019 gives guidance on variations to the specifications given in IEC 60146-1-1:2009 to enable the specification to be extended in a controlled form for special cases. Background information is also given on technical points, which facilitates the use of IEC 60146-1-1:2009. This technical report primarily covers line commutated converters and is not in itself a specification, except as regards certain auxiliary components, in so far as existing standards may not provide the necessary data. This fifth edition includes the following significant technical changes with respect to the previous edition:
a) addition of annexes concerning the applications of converter transformers and of fuses for overcurrent protection;
b) changes of calculation methods related the inductive voltage regulation and changes of description on transformer losses to be consistent with the latest transformer standards;
c) addition and updates of references based on the latest information.
- Technical report105 pagesEnglish languagesale 15% off
IEC 62899-203:2018(E) defines terms and specifies standard methods for characterisation and evaluation. This document is applicable to semiconductor inks and semiconductive layers that are made from semiconductor inks.
- Standard22 pagesEnglish languagesale 15% off
IEC/TR 62572-4:2013(E) which is a technical report, provides guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers. It includes details about handling receptacle style optical transceivers, internal structures of optical transceivers, information on cleaning tools and machines, applicable cleaning methods and cleaning procedures. Receptacle style optical transceivers as well as optical fibre patch cords are handled by operators and maintenance staff of optical network systems. This technical report may be used as a guideline to prepare instruction manuals for the operators and maintenance staff of optical network systems. Keywords: optical connector end-face cleaning methods, receptacle style optical transceivers, optical network systems.
- Technical report23 pagesEnglish languagesale 15% off
IEC 60146-1-1:2009 specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices. It is primarily intended to specify the basic requirements for converters in general and the requirements applicable to line commutated converters for conversion of a.c. power to d.c. power or vice versa. Parts of this standard are also applicable to other types of electronic power converter provided that they do not have their own product standards. This fourth edition constitutes a technical revision and introduces five main changes: - re-edition of the whole standard according to the current directives; - correction of definitions and addition of new terms, especially terms concerning EMC, harmonic distortion and insulation co-ordination; - the service condition tolerances have been revised according to the IEC 61000 series; - the insulation tests have been revised considering the insulation co-ordination; - addition of three annexes.
- Standard99 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60146-1-2:2011(E) gives guidance on variations to the specifications given in IEC 60146-1-1:2009 to enable the specification to be extended in a controlled form for special cases. Background information is also given on technical points which should facilitate the use of IEC 60146-1-1:2009. This technical report primarily covers line commutated converters and is not in itself a specification, except as regards certain auxiliary components, in so far as existing standards may not provide the necessary data. This fourth edition includes the following main changes with respect to the previous edition:
a) re-edition of the whole document according to the current Directives;
b) correction of some errors.
- Technical report83 pagesEnglish languagesale 15% off
IEC 60146-1-1:2009 specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices. It is primarily intended to specify the basic requirements for converters in general and the requirements applicable to line commutated converters for conversion of a.c. power to d.c. power or vice versa. Parts of this standard are also applicable to other types of electronic power converter provided that they do not have their own product standards. This fourth edition constitutes a technical revision and introduces five main changes:
- re-edition of the whole standard according to the current directives;
- correction of definitions and addition of new terms, especially terms concerning EMC, harmonic distortion and insulation co-ordination;
- the service condition tolerances have been revised according to the IEC 61000 series;
- the insulation tests have been revised considering the insulation co-ordination;
- addition of three annexes.
- Standard189 pagesEnglish and French languagesale 15% off
- Draft84 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft84 pagesEnglish languagesale 10% offe-Library read for1 day
IEC TS 61439-7:2014-02(en-fr) defines the specific requirements of ASSEMBLIES as follows:
- ASSEMBLIES for which the rated voltage does not exceed 1 000 V in case of a.c. or 1 500 V in case of d.c;
- stationary or movable ASSEMBLIES with enclosure;
- ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment;
- ASSEMBLIES operated by ordinary persons;
- ASSEMBLIES intended to be installed and used in marinas, camping sites, market squares and other similar external public sites or similar sites;
- ASSEMBLIES intended for charging stations for electric vehicles.
This publication is to be read in conjunction with IEC 61439-1:2011
- Technical specification60 pagesEnglish and French languagesale 15% off