IEC 62769-102-2:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑100 (annex on generic protocol extensions) for the Ethernet/IP protocol.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62769-151-1:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑7 for the OPC UA protocol.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62769-8:2023 specifies how the internal view of a device model represented by the EDD can be transferred into an external view as an OPC-UA information model by mapping EDD constructs to OPC-UA objects.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62769-102-2:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑100 (annex on generic protocol extensions) for the Ethernet/IP protocol.

  • Standard
    26 pages
    English and French language
    sale 15% off

IEC 62769-151-1:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑7 for the OPC UA protocol.

  • Standard
    34 pages
    English and French language
    sale 15% off

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system.
These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications.
The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages.
The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards.
Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents.
This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62769-8:2023 specifies how the internal view of a device model represented by the EDD can be transferred into an external view as an OPC-UA information model by mapping EDD constructs to OPC-UA objects.

  • Standard
    105 pages
    English and French language
    sale 15% off

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-1:2023 specifies the generic concept of fieldbuses. This document also presents an overview and guidance for the IEC 61158 eries by:
explaining the structure and content of the IEC 61158 series;
relating the structure of the IEC 61158 series to the ISO/IEC 7498-1 OSI Basic Reference Model;
showing the logical structure of the IEC 61784 series;
showing how to use parts of the IEC 61158 series in combination with the IEC 61784 series;
providing explanations of some aspects of the IEC 61158 series that are common to the type specific parts of the IEC 61158‑5 series including the application layer service description concepts and the generic fieldbus data types.

  • Standard
    161 pages
    English and French language
    sale 15% off

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    102 pages
    English language
    sale 15% off
  • Technical specification
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Technical specification
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    141 pages
    English language
    sale 15% off
  • Technical specification
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet Protocol (IP).
The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX.
The system performance characteristics for alarm transmission are specified in EN 50136-1.
The performance characteristics of the supervised premises equipment should comply with the requirements of its associated alarm system standard and applies for transmission of all types of alarms including, but not limited to, fire, intrusion, access control and social alarms.
Compliance with this document is voluntary.

  • Technical specification
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet Protocol (IP). The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX. The system performance characteristics for alarm transmission are specified in EN 50136-1. The performance characteristics of the supervised premises equipment should comply with the requirements of its associated alarm system standard and applies for transmission of all types of alarms including, but not limited to, fire, intrusion, access control and social alarms. Compliance with this document is voluntary.

  • Technical specification
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62657-1:2017 provides the wireless communication requirements dictated by the applications of wireless communication systems in industrial automation, and requirements of related context. The requirements are specified in a way that is independent of the wireless technology employed. The requirements are described in detail and in such a way as to be understood by a large audience, including readers who are not familiar with the industry applications. This first edition cancels and replaces the first edition of IEC TS 62657-1 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TS 62657‑1:2014: a) update of requirements for wireless industrial applications; b) addition of performance indicators and their measurement.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    141 pages
    English language
    sale 15% off
  • Technical specification
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62952-3:2017 specifies requirements and a profile for a power source containing a generic energy harvesting adapter module (GEHAM) used as power source for wireless communication devices (WCD).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    140 pages
    English language
    sale 15% off
  • Technical specification
    140 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    141 pages
    English language
    sale 15% off
  • Technical specification
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62952-1:2016 specifies the general requirements of power modules for wireless communication devices (WCD). This document includes additional optional specifications to permit use in explosive atmospheres and harsh environments. This International Standard is based on VDI/VDE 2185 Blatt 3.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power source for wireless communication devices.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in national legislations on Retained Data. The present document considers both the requesting of retained data and the delivery of the results. The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    141 pages
    English language
    sale 15% off
  • Technical specification
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-1:2019 specifies the generic concept of fieldbuses. This document presents an overview and guidance for the IEC 61158 series explaining the structure and content of the IEC 61158 series, relating the structure of the IEC 61158 series to the ISO/IEC 7498-1 OSI Basic Reference Model and showing how to use parts of the IEC 61158 series in combination with the IEC 61784 series. It also provides explanations of some aspects of the IEC 61158 series that are common to the type specific parts of the IEC 61158 5 including the application layer service description concepts and the generic fieldbus data types. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant changes with respect to the previous edition:
• updates of the references to and information about the IEC 61158 series, IEC 61784 1, IEC 61784 3, IEC 61784-5 series and IEC 61918 throughout the document;
• new Type 25 and the related profile family CPF 20;
• new Type 26 and the related profile family CPF 21.

  • Standard
    166 pages
    English and French language
    sale 15% off

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    135 pages
    English language
    sale 15% off
  • Technical specification
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    132 pages
    English language
    sale 15% off
  • Technical specification
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62952 specifies requirements and a profile for a power source containing a
generic energy harvesting adapter module (GEHAM) used as power source for wireless
communication devices (WCD).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    132 pages
    English language
    sale 15% off
  • Technical specification
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    133 pages
    English language
    sale 15% off
  • Technical specification
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    134 pages
    English language
    sale 15% off
  • Technical specification
    134 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power
source for wireless communication devices.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62952 specifies the general requirements of power modules for wireless
communication devices (WCD). This document includes additional optional specifications to
permit use in explosive atmospheres and harsh environments.
This document specifies the usability over the life-cycle of a power module including replacing
in explosive atmosphere.Unreplaceable batteries such as memory backup are out of the
scope of this standard.
Secondary batteries or power modules are covered by this document, but method of its power
charging is out of scope.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62952-3:2017 specifies requirements and a profile for a power source containing a generic energy harvesting adapter module (GEHAM) used as power source for wireless communication devices (WCD).

  • Standard
    38 pages
    English and French language
    sale 15% off

IEC 62657-1:2017 provides the wireless communication requirements dictated by the applications of wireless communication systems in industrial automation, and requirements of related context. The requirements are specified in a way that is independent of the wireless technology employed. The requirements are described in detail and in such a way as to be understood by a large audience, including readers who are not familiar with the industry applications.
This first edition cancels and replaces the first edition of IEC TS 62657-1 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TS 62657‑1:2014:
a) update of requirements for wireless industrial applications;
b) addition of performance indicators and their measurement.

  • Standard
    122 pages
    English and French language
    sale 15% off

IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power source for wireless communication devices.

  • Standard
    17 pages
    English and French language
    sale 15% off

IEC 62952-1:2016 specifies the general requirements of power modules for wireless communication devices (WCD). This document includes additional optional specifications to permit use in explosive atmospheres and harsh environments. This International Standard is based on VDI/VDE 2185 Blatt 3.

  • Standard
    29 pages
    English and French language
    sale 15% off

The present document is based on requirements from TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    129 pages
    English language
    sale 15% off
  • Technical specification
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    2 pages
    English language
    sale 15% off
  • Technical specification
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document is based on requirements from TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    129 pages
    English language
    sale 15% off
  • Technical specification
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day

There is a number of communication protocols that can be used in conjunction with the SpaceWire Standard (ECSS-E-ST-50-12), to provide a comprehensive set of services for onboard user applications. To distinguish between the various protocols a protocol identifier is used, as specified in ECSS-E-ST-50-51.
This Standard specifies the CCSDS packet transfer protocol, which is one of these protocols that works over SpaceWire.
The aim of the CCSDS Packet Transfer Protocol is to transfer CCSDS Packets across a SpaceWire network. It does this by encapsulating the CCSDS Packet in a SpaceWire packet, transferring it across the SpaceWire network and then extracting the CCSDS Packet at the target.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard provides specifications in accordance with the OSI Basic Reference Model,
ISO/IEC 7498–1, (e.g., PhL, DL, etc.), and also provides security and management (including
network and device configuration) specifications for wireless devices serving Annex C’s usage
classes 1 through 5, and potentially class 0, for fixed, portable, and moving devices.
This standard is intended to provide reliable and secure wireless operation for non-critical
monitoring, alerting, supervisory control, open loop control, and closed loop control
applications. This standard defines a protocol suite, including system management, gateway
considerations, and security specifications, for low-data-rate wireless connectivity with fixed,
portable, and slowly-moving devices, often operating under severe energy and power
constraints. The application focus is the performance needs of process automation monitoring
and control where end-to-end communication latencies on the order of at least 100 ms can be
tolerated.
To meet the needs of industrial wireless users and operators, the technology specified in this
document provides robustness in the presence of interference found in harsh industrial
environments or caused by wireless systems not covered by this international standard. As
described in Clause 4, this standard addresses coexistence with other wireless devices
anticipated in the industrial workspace, such as cell phones and devices based on IEC 62591
(based on WirelessHART™1), IEC 62601 (based on WIA-PA), IEEE 802.11 (WiFi),
IEEE 802.15, IEEE 802.16 (WiMax), and other relevant standards. Furthermore, this standard
supports interoperability of devices compliant with this international standard, as described in
Clause 5, in those aspects of operation that are covered by this international standard.
This standard does not define or specify plant infrastructure or its security or performance
characteristics. However, it is important that the security of the plant infrastructure be assured
by the end user.

  • Standard
    871 pages
    English language
    sale 10% off
    e-Library read for
    1 day

There is a number of communication protocols that can be used in conjunction with the SpaceWire Standard (ECSS-E-ST-50-12), to provide a comprehensive set of services for onboard user applications. To distinguish between the various protocols a protocol identifier is used, as specified in ECSS-E-ST-50-51.
This Standard specifies the CCSDS packet transfer protocol, which is one of these protocols that works over SpaceWire.
The aim of the CCSDS Packet Transfer Protocol is to transfer CCSDS Packets across a SpaceWire network. It does this by encapsulating the CCSDS Packet in a SpaceWire packet, transferring it across the SpaceWire network and then extracting the CCSDS Packet at the target.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61158-1:2014 specifies the generic concept of fieldbuses. It also presents an overview and guidance for the IEC 61158 series by:
- explaining the structure and content of the IEC 61158 series;
- relating the structure of the IEC 61158 series to the ISO/IEC 7498-1 OSI Basic Reference Model;
- showing the logical structure of the IEC 61784 series;
- showing how to use parts of the IEC 61158 series in combination with the IEC 61784 series;
- providing explanations of some aspects of the IEC 61158 series that are common to the type specific parts of the IEC 61158-5 including the application layer service description concepts and the generic fieldbus data types. This first edition cancels and replaces the third edition of IEC/TR 61158-1 published in 2010 and constitutes a technical revision. It includes the following changes:
- updates of the references to and information about the IEC 61158 series, IEC 61784-1, IEC 61784-3, IEC 61784-5 series and IEC 61918 throughout the document;
- new Type 23 for profile family 8;
- new Type 24 and the related profile family CPF 19;
- new Subclause 7.7 Communication profiles for wireless communication networks;
- new Clause 11 Fieldbus system requirements;
- new Annex B Media selection for fieldbus systems.

  • Standard
    156 pages
    English and French language
    sale 15% off

The present document contains handover requirements and a handover specification for the data that is identified in EU Directive 2006/24/EC on Data Retention [1]. The handover requirements from TS 102 656 [2] are derived from the requirements contained in and implied by the EU Directive [1] and by other national legislations. The present document considers both the requesting of retained data and the delivery of the results. The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    130 pages
    English language
    sale 15% off
  • Technical specification
    130 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document contains handover requirements and a handover specification for the data that is identified in EU Directive 2006/24/EC on Data Retention [1]. The handover requirements from TS 102 656 [2] are derived from the requirements contained in and implied by the EU Directive [1] and by other national legislations. The present document considers both the requesting of retained data and the delivery of the results. The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    123 pages
    English language
    sale 15% off
  • Technical specification
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document contains handover requirements and a handover specification for the data that is identified in EU Directive 2006/24/EC on Data Retention [1]. The handover requirements from TS 102 656 [2] are derived from the requirements contained in and implied by the EU Directive [1] and by other national legislations. The present document considers both the requesting of retained data and the delivery of the results. The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the present document does not consider manual techniques.

  • Standard
    123 pages
    English language
    sale 15% off
  • Technical specification
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard describes a generic methodology for dependability assessment and assurance of communication networks from a network life cycle perspective. It presents the network dependability assessment strategies and methodology for analysis of network topology, evaluation of dependability of service paths, and optimization of network configurations in order to achieve network dependability performance and dependability of service. It also addresses the network dependability assurance strategies and methodology for application of network health check, network outage control and test case management to enhance and sustain dependability performance in network service operation. This standard is applicable to network service providers, network designers and developers, and network maintainers and operators for assurance of network dependability performance and assessment of dependability of service.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day