The present document applies to user equipment, repeaters and base stations for IMT, falling within the scope of one of
the other parts of ETSI EN 301 908 [i.8], except for IMT-2000 FDMA/TDMA (DECT). The present document also
covers the corresponding ancillary equipment.
NOTE 1: ETSI EN 301 908-10 [i.7] contains in particular requirements for radiated spurious emissions and control
and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment.
The present document includes technical requirements which are common to equipment falling within the scope of
several of the other parts. It should be used in conjunction with at least another part of ETSI EN 301 908 [i.8].
NOTE 2: The other parts of ETSI EN 301 908 [i.8], which are listed in the foreword of the present document,
specify technical requirements in respect of a particular type of IMT equipment.
NOTE 3: Recommendations ITU-R M.1457-15 [i.4], M.2012-4 [i.5] and M.2150.0 [i.10] define the characteristics
of the members of the IMT-2000 family and IMT-Advanced respectively by means of references to
technical specifications developed by Standards Development organizations. The present document
applies to equipment designed to meet any version of the terrestrial specifications referenced in
Recommendations ITU-R M.1457-15 [i.4] and M.2012-4 [i.5].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
NOTE 4: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    31 pages
    English language
    sale 15% off
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
E-UTRA NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28 and 65 defined in table 1-1. The
present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™ Releases 8,
9, 10, 11, 12, and 13 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating bands
and E-UTRA CA operating bands from 3GPP™ Release 13 defined in ETSI TS 136 101 [3].
NOTE 2: For Band 20:
 For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
Total Radiated Power (TRP), as described in Commission Decision 2010/267/EU [i.6], ECC
Decision (09)03 [i.7].
 For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    148 pages
    English language
    sale 15% off
  • Standard
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    148 pages
    English language
    sale 15% off
  • Draft
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following equipment types for IMT-FT. IMT-FT is the Digital Enhanced Cordless Telecommunications (DECT) system being a member of the ITU IMT-2000 family: a) Base Station (BS) (termed as Fixed Part (FP) throughout the present document) b) User Equipment (UE) (termed as Portable Part (PP) throughout the present document) c) Cordless Terminal Adapter (CTA) (specific type of UE) d) Repeater (termed as Wireless Relay Station (WRS) (FP and PP combined) throughout the present document) e) Hybrid Part (HyP) (a PP with capability to act as a FP to provide PP to PP communication).

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    99 pages
    English language
    sale 15% off
  • Standard
    100 pages
    English language
    sale 15% off
  • Draft
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to user equipment, repeaters and base stations for IMT, falling within the scope of one of
the other parts of ETSI EN 301 908 [i.8], except for IMT-2000 FDMA/TDMA (DECT). The present document also
covers the corresponding ancillary equipment.
NOTE 1: ETSI EN 301 908-10 [i.7] contains in particular requirements for radiated spurious emissions and control
and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment.
The present document includes technical requirements which are common to equipment falling within the scope of
several of the other parts. It should be used in conjunction with at least another part of ETSI EN 301 908 [i.8].
NOTE 2: The other parts of ETSI EN 301 908 [i.8], which are listed in the foreword of the present document,
specify technical requirements in respect of a particular type of IMT equipment.
NOTE 3: Recommendations ITU-R M.1457-15 [i.4], M.2012-4 [i.5] and M.2150.0 [i.10] define the characteristics
of the members of the IMT-2000 family and IMT-Advanced respectively by means of references to
technical specifications developed by Standards Development organizations. The present document
applies to equipment designed to meet any version of the terrestrial specifications referenced in
Recommendations ITU-R M.1457-15 [i.4] and M.2012-4 [i.5].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
NOTE 4: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English language
    sale 15% off
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies technical characteristics and methods of measurements for the following equipment
types:
• Multi-Standard Radio capable Base stations (NR, E-UTRA, UTRA, GSM/EDGE, NB-IoT).
Operation of NR in combination with UTRA or GSM/EDGE is not supported.
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band
Categories.
The present document covers conducted requirements for multi-RAT capable NR, E-UTRA, UTRA and GSM/EDGE
MSR Base Stations for 3GPP™ Release 9, 10, 11, 12, 13, 14 and 15. This includes the requirements for MSR operating
bands from 3GPP Release 16.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    91 pages
    English language
    sale 15% off
  • Standard
    91 pages
    English language
    sale 15% off
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies technical characteristics and methods of measurements for the following equipment
types (which are parts of a Mobile Communication On Board Aircraft system):
1) The Onboard Base Transceiver Station (OBTS) supporting GSM and/or UMTS, and/or LTE communication
protocols including specific functions for restricting the transmit power of the MSs or UEs, associated with the
OBTS.
2) The Network Control Unit (NCU) preventing direct connection of the onboard mobile terminals with mobile
networks on the ground by raising the noise floor in the cabin.
The OBTSs are capable of operating in all or any part of the frequency bands given in table 1-1.
The present document applies only to radio equipment using a dedicated transmitting antenna that is designed as an
indispensable part of the system for usage on board an aircraft.
It applies to equipment for continuous and discontinuous transmission of data and digital speech.
Within the European Union, the system covered by the present document operates in accordance with the operational
requirements as outlined in the Commission Decision 2016/2317/EU [i.4] based on the former Decision 2013/654 [i.3].
In relation the NCU, some frequency bands are now optional while they were mandatory before. Due to this difference
the present document had to be reviewed.
The present document contains requirements to ensure that such Radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive [i.1] may apply to equipment within the scope of the
present document.
The present document does not cover equipment compliance with relevant civil aviation regulations. In this respect, a
MCOBA system, for its installation and operation on board an aircraft is subject to additional national or international
civil aviation airworthiness certification requirements, for example to EUROCAE ED-14G [i.7].
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    54 pages
    English language
    sale 15% off
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies technical characteristics and methods of measurements for the types of equipment:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
2) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA) with NB-IoT.
3) Base Station for NB-IoT standalone.
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Unless
stated otherwise, requirements specified for the TDD duplex mode apply for downlink and uplink operations in Frame
Structure Type 2. NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28, 31, 41, 42, 43, 65, 72,
87, 88 which are defined in table 1-1.
The present document covers conducted requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10, 11, 12, 13,
14 and 15. Additionally, it includes the requirements for E-UTRA Base Station operating bands and E-UTRA CA
operating bands from 3GPP Release 16.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in annex A.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    139 pages
    English language
    sale 15% off
  • Standard
    141 pages
    English language
    sale 15% off
  • Draft
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment type:
• User Equipment for IMT-2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD User Equipment from 3GPP™ Releases 99, 4, 5, 6, 7, 8, 9,
10 and 11 defined in ETSI TS 125 101 [4]. This includes the requirements for UE operating bands from 3GPP™
Release 12 defined in ETSI TS 125 101 [4]. In addition, the present document covers requirements for UTRA FDD
User Equipment in the operating bands specified in ETSI TS 102 735 [i.4].
NOTE 2: For Band XX:
- for user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (Total Radiated Power), as described in Commission Decision 2010/267/EU [i.6],
ECC Decision (09)03 [i.7] and CEPT Report 30 [i.8];
- for user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7] and
CEPT Report 30 [i.8].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    62 pages
    English language
    sale 15% off
  • Standard
    63 pages
    English language
    sale 15% off
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment types:
• Repeaters for Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD).
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1.
Table 1-1: E-UTRA Repeater operating bands
The present document covers requirements for E-UTRA Repeaters for 3GPP Release 15. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    39 pages
    English language
    sale 15% off
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1 through 1-5.
Table 1-1: E-UTRA UE operating bands
NOTE 1: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.2] is given in annex A.
Table 1-1A: Sub-bands for band 46
Table 1-2: E-UTRA UE Intra-band contiguous CA operating bands
Table 1-3: E-UTRA UE Inter-band CA operating bands (two bands)
Table 1-4: E-UTRA UE Inter-band CA operating bands (three bands)
Table 1-5: Intra-band non-contiguous CA operating bands (with two sub-blocks)
E-UTRA NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28 and 65 defined in table 1-1. The present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™ Releases 8, 9, 10, 11, 12, and 13 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating bands and E-UTRA CA operating bands from 3GPP™ Release 13 defined in ETSI TS 136 101 [3].
NOTE 2: For Band 20: For user equipment designed to be mobile or nomadic, the requirements in the present document measured at the antenna port also show conformity to the corresponding requirement defined as TRP (total radiated power), as described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7]. For user equipment designed to be fixed or installed, the present document does not address the requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7]. The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    143 pages
    English language
    sale 15% off
  • Standard
    143 pages
    English language
    sale 15% off
  • Draft
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to user equipment, repeaters and base stations for IMT, falling within the scope of one of the other parts of ETSI EN 301 908 [i.8], except for IMT-2000 FDMA/TDMA (DECT). The present document also covers the corresponding ancillary equipment.
NOTE 1: ETSI EN 301 908-10 [i.7] contains in particular requirements for radiated spurious emissions and control and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment. The present document includes technical requirements which are common to equipment falling within the scope of several of the other parts. It should be used in conjunction of at least another part of ETSI EN 301 908 [i.8].
NOTE 2: The other parts of ETSI EN 301 908 [i.8], which are listed in the foreword of the present document, specify technical requirements in respect of a particular type of IMT equipment.
NOTE 3: Recommendations ITU-R M.1457-12 [i.4] and M.2012-1 [i.5] define the characteristics of the members of the IMT-2000 family and IMT-Advanced respectively by means of references to technical specifications developed by Standards Development organizations. The present document applies to equipment designed to meet any version of the terrestrial specifications referenced in Recommendations ITU-R M.1457-12 [i.4] and M.2012-1 [i.5]. The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
NOTE 4: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    27 pages
    English language
    sale 15% off
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following equipment types:
• Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE, NB-IoT).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.      NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band
Categories.
The present document covers conducted requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR
Base Stations for 3GPP™ Release 9, 10, 11, 12 and 13. This includes the requirements for E UTRA Base Station
operating bands and E-UTRA CA operating bands from 3GPP Release 14.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.

  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    82 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for the types of equipment:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
2) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA) with NB-IoT.
3) Base Station for NB-IoT standalone.
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Unless
stated otherwise, requirements specified for the TDD duplex mode apply for downlink and uplink operations in Frame
Structure Type 2. NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28 which are defined in
table 1-1.
The present document covers conducted requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10, 11, 12 and
13. Additionally, it includes the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating
bands from 3GPP Release 14.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in annex A.

  • Standard
    116 pages
    English language
    sale 15% off
  • Standard
    116 pages
    English language
    sale 15% off
  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    119 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for the equipment:
• Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
- This radio equipment type is capable of operating in all or any part of the frequency bands given in
table 1-1.
The present document covers conducted requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8,
9, 10, 11, 12 and 13. Additionally, it includes the requirements for BS operating bands from 3GPP Release 14.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.2] is given in annex A.

  • Standard
    65 pages
    English language
    sale 15% off
  • Standard
    65 pages
    English language
    sale 15% off
  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    66 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
• User Equipment for IMT-2000 CDMA Direct Spread (UTRA FDD).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
The present document covers requirements for UTRA FDD User Equipment from 3GPP™ Releases 99, 4, 5, 6, 7, 8, 9,
10 and 11 defined in ETSI TS 125 101 [4]. This include the requirements for UE operating bands from 3GPP™
Release 12 defined in ETSI TS 125 101 [4]. In addition, the present document covers requirements for UTRA FDD
User Equipment in the operating bands specified in ETSI TS 102 735 [i.4].
NOTE: For Band XX:
- for user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (Total Radiated Power), as described in Commission Decision 2010/267/EU [i.6],
ECC Decision (09)03 [i.7] and CEPT Report 30 [i.8];
- for user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7] and
CEPT Report 30 [i.8].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
conditions identified in annex A.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    57 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1
through 1-5.
The present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™
Releases 8, 9, 10 and 11 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating
bands and E-UTRA CA operating bands from 3GPP™ Release 12 defined in ETSI TS 136 101 [i.13].
NOTE: For Band 20:
􀀀 For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (total radiated power), as described in Commission Decision 2010/267/EU [i.6], ECC
Decision (09)03 [i.7] and CEPT Report 30 [i.8].
􀀀 For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7] and
CEPT Report 30 [i.8].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
conditions identified in annex A.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    85 pages
    English language
    sale 15% off

The present document applies to the following equipment types:
1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE).
The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base
Stations for 3GPP™ Release 9, 10 and 11. This includes the requirements for E UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    68 pages
    English language
    sale 15% off

The present document applies to the following radio equipment types:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes
1) the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
2) The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
3) conditions identified in annex A.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    90 pages
    English language
    sale 15% off

The present document applies to the following equipment types:
1) Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and
11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document
covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
conditions identified in annex A.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 15% off

The present document applies to the following equipment types:
1) An Onboard Base Transceiver System (OBTS) supporting GSM, UMTS or LTE communication protocols including specific functions for restricting the transmit power of the MSs or UEs, respectively associated with the OBTS.
2) Network Control Unit (NCU) preventing direct connection of the onboard mobile terminals with mobile networks on the ground by raising the noise floor in the cabin.
It applies to equipment for continuous and discontinuous transmission of data and digital speech.
The present document applies only to radio equipment using a dedicated transmitting antenna that is designed as an indispensable part of the system for usage on board an aircraft.
Within the European Union, the system covered by the present document operates in accordance with the operational requirements as outlined in the Commission Decision 2013/654/EU [i.3].
The present document contain requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specifie technical requirements in respect of essential requirements under other parts of Article 3 of the Radio Equipment Directive may apply to equipment within the scope of the present document.
The present document does not cover equipment compliance with relevant civil aviation regulations. In this respect, a MCOBA system, for its installation and operation on board an aircraft is subject to additional national or international civil aviation airworthiness certification requirements, for example to EUROCAE ED-14G [i.6].

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    50 pages
    English language
    sale 15% off

The present document covers requirements for E-UTRA Repeaters for Release 8, 9, 10 and 11. This includes the
requirements for E UTRA Repeater operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 15% off

The present document covers requirements for UTRA FDD Repeater for Releases 4, 5, 6, 7, 8, 9, 10 and 11. This
includes the requirements for Repeater operating bands from 3GPP Release 12. In addition, the present document
covers requirements for UTRA Repeater in the operating bands specified in ETSI TS 102 735 [i.9].
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    English language
    sale 15% off

The present document covers requirements for UTRA FDD User Equipment from 3GPP™ Releases 99, 4, 5, 6, 7, 8, 9,
10 and 11 defined in ETSI TS 125 101 [4]. This include the requirements for UE operating bands from 3GPP™
Release 12 defined in ETSI TS 125 101 [4]. In addition, the present document covers requirements for UTRA FDD
User Equipment in the operating bands specified in ETSI TS 102 735 [i.4].
NOTE: For Band XX:
- for user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (Total Radiated Power), as described in Commission Decision 2010/267/EU [i.6],
ECC Decision (09)03 [i.7] and CEPT Report 30 [i.8];
- for user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7] and
CEPT Report 30 [i.8].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 15% off
  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    54 pages
    English language
    sale 15% off

The present document applies to the Ground Station, Aircraft Station and antenna equipment for DA2GC (TDD).The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    36 pages
    English language
    sale 15% off

The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the
scope of the present document.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 15% off

The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and
11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document
covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports
the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 15% off

The present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™
Releases 8, 9, 10 and 11 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating
bands and E-UTRA CA operating bands from 3GPP™ Release 12 defined in ETSI TS 136 101 [i.13].
NOTE: For Band 20:
􀀀 For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (total radiated power), as described in Commission Decision 2010/267/EU [i.6], ECC
Decision (09)03 [i.7] and CEPT Report 30 [i.8].
􀀀 For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6], ECC Decision (09)03 [i.7] and
CEPT Report 30 [i.8].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    82 pages
    English language
    sale 15% off
  • Standard
    80 pages
    English language
    sale 15% off

The present document applies to the following equipment types:
1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base Stations for 3GPP™ Release 9, 10 and 11. This includes the requirements for E UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    67 pages
    English language
    sale 15% off
  • Standard
    66 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
• User Equipment for IMT-2000 OFDMA TDD WMAN (Mobile WiMAXTM) operating in TDD mode.
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the scope of the present document.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 15% off

The present document applies to the following equipment types:
1)Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and 11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    63 pages
    English language
    sale 15% off

The present document applies to the following radio equipment types:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes
the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    85 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
• Base stations for IMT-2000 OFDMA TDD WMAN (Mobile WiMAXTM) operating in TDD mode.
The requirements in the present document apply to both Wide Area Base Stations and Local Area Base Stations unless otherwise stated.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the scope of the present document.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
• Mobile WiMAXTM FDD User Equipment for IMTOFDMA TDD WMAN.
The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive 2014/53/EU [i.2] may apply to equipment within the scope of the present document.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 15% off

The present document covers requirements for UTRA FDD User Equipment from 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10,
and 11 defined in ETSI TS 125 101 [5]. This includes the requirements for UE operating bands from 3GPP Release 12
defined in ETSI TS 125 101 [i.12]. In addition, the present document covers requirements for UTRA FDD User
Equipment in the operating bands specified in ETSI TS 102 735 [i.4].
NOTE 1: For Band XX:
- for user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (Total Radiated Power), as described in Commission Decision 2010/267/EU [i.7],
ECC Decision (09)03 [i.8] and CEPT Report 30 [i.9];
- for user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.7], ECC Decision (09)03 [i.8] and
CEPT Report 30 [i.9].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2,
which states that "radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    55 pages
    English language
    sale 15% off

The present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP
Releases 8, 9, 10 and 11 defined in ETSI TS 136 101 [4]. This includes the requirements for E-UTRA UE operating
bands and E-UTRA CA operating bands from 3GPP Release 12 defined in ETSI TS 136 101 [i.14].
NOTE 1: For Band 20:
􀀀 For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (total radiated power), as described in Commission Decision 2010/267/EU [i.7], ECC
Decision (09)03 [i.8] and CEPT Report 30 [i.9].
􀀀 For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.7], ECC Decision (09)03 [i.8] and
CEPT Report 30 [i.9].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    80 pages
    English language
    sale 15% off

The present document applies to the following radio equipment types:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes
the requirements for E UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    81 pages
    English language
    sale 15% off
  • Standard
    81 pages
    English language
    sale 15% off
  • Standard
    81 pages
    English language
    sale 15% off

The present document applies to the following {radio}{telecommunications terminal} equipment types:
Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and 11. This includes the requirements for BS operating bands from 3GPP Release 12. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 [i.4].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    61 pages
    English language
    sale 15% off
  • Standard
    62 pages
    English language
    sale 15% off
  • Standard
    63 pages
    English language
    sale 15% off

The EN will cover all E UTRA, UTRA and GSM/EDGE features that are relevant for MSR BS, up to and including 3GPP Release 11. This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for MSR BS in addition to those common ones of Part 1.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    62 pages
    English language
    sale 15% off
  • Standard
    63 pages
    English language
    sale 15% off
  • Standard
    56 pages
    English language
    sale 15% off
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment type:
1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band Categories.The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base Stations for 3GPP™ Release 9, 10 and 11. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) [i.2], Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document. NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    62 pages
    English language
    sale 15% off

This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for UTRA FDD UE in addition to those common ones of Part 1. The 6th release of the EN will cover all UTRA features that are relevant for UTRA FDD UE, up to and including 3GPP Release 10. In addition it covers any new operating band planned to be used in the 6th release.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 15% off

The sixth Release of the EN will cover all UTRA FDD features up to and including 3GPP Release 10. This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for MSR BS in addition to those common ones of Part 1. Any new operating band planned to be used in the 6th release will also be covered, including the 3500MHz 3GPP band.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    49 pages
    English language
    sale 15% off

The sixth Release of the EN will cover all E UTRA features up to and including 3GPP Release 10. This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for MSR BS in addition to those common ones of Part 1. Any new operating band planned to be used in the 6th release will also be covered, including Band 40 and the 3500MHz 3GPP bands.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 15% off

This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for UTRA FDD UE in addition to those common ones of Part 1. The 6th release of the EN will cover all E UTRA features that are relevant for E-UTRA UE, up to and including 3GPP Release 10.  Any new operating band planned to be used in the 6th release will also be covered, including band 40 and 3500MHz 3GPP bands.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    65 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
- User Equipment for IMT-2000 OFDMA TDD WMAN (Mobile WiMAX) operating in TDD mode. This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive 1999/5/EC [i.2] may apply to equipment within the scope of the present document.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
- Base stations for IMT-2000 OFDMA TDD WMAN (Mobile WiMAX) operating in TDD mode.
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1.
The requirements in the present document apply to both Wide Area Base Stations and Local Area Base Stations unless otherwise stated. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2], (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 1999/5/EC [i.2] may apply to equipment within the scope of the present document.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
- User Equipment (also denoted as Mobile stations or Access Terminals) for IMT-2000 CDMA multi-carrier (cdma2000). These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
The present document covers requirements for IMT-2000 CDMA multi-carrier (cdma2000) User Equipments and Evolved CDMA Multi-Carrier (UMB) User Equipment. User Equipment for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 Spread Spectrum Systems as defined in 3GPP2 C.S0002-E [2], referred to herein as operation in type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in 3GPP2 C.S0024-200-C [7] subtypes 0, 1, 2 and 3, referred to herein as operation in type 2 cdma2000 systems; or
3) operation in both, type 1 and type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    61 pages
    English language
    sale 15% off

The present document applies to the following radio equipment type:
- User Equipment for IMT-2000 CDMA Direct Spread (UTRA FDD). These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1. The present document covers requirements for UTRA FDD User Equipment from 3GPP Releases 99, 4, 5, 6, 7, 8, and 9. In addition, the present document covers requirements for UTRA FDD User Equipment in the operating bands specified in TS 102 735 [i.4].
NOTE 1: For Band XX:
- for user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
TRP (Total Radiated Power), as described in Commission Decision 2010/267/EU [i.7], ECC Decision (09)03 [i.8] and CEPT Report 30 [i.9];
- for user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.7], ECC Decision (09)03 [i.8] and
CEPT Report 30 [i.9]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2, which states that "radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to the following radio equipment type:
1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE). These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1. The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base Stations for 3GPP Release 9 and 10. The present document is intended to cover the provisions of Directive 1999/5/EC (R&TTE Directive) [i.2], Article 3.2, which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

DEN/MSG-TFES-13-23

  • Standard
    246 pages
    English language
    sale 15% off
  • Standard
    247 pages
    English language
    sale 15% off
  • Draft
    247 pages
    English language
    sale 10% off
    e-Library read for
    1 day