65.060.30 - Sowing and planting equipment

This document, intended to be used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, and seed drills with integrated and inseparable powered soil-working tools used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document is also applicable to seeding systems where components for seed deposition in the soil, for seed metering and for seed storage are distributed between two or more linked vehicles.
This document deals with all significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer, excepting the hazards arising from
—          electrostatic phenomena,
—          external influences on electrical equipment,
—          failure of energy supply,
—          failure and/or malfunction of the control system,
—          inadequate visibility from drivers'/operators' position,
—          travelling functions (drive, braking, etc.),
—          break down of parts rotating at high speed,
—          equipment for loading seeds (and fertilizer), and
—          moving parts for power transmission except for strength requirements for guards.
This document is not applicable to
—          fertilizer distributors designed only for solid fertilizer application (covered in ISO 4254-8),
—          maintenance or repairs carried out by professional service personnel, or
—          to environmental hazards (except noise), and
—          to seed drills which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.

Standard
30 pages
English language
sale 10% off
e-Library read for
1 day
Draft
25 pages
English language
sale 10% off
e-Library read for
1 day

30-Oct-2018
29-Apr-2019
65.060.30
2006/42/EC
M/396
CEN/TC 144

SIST

SIST EN ISO 4254-9:2019(Main)

Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)

EN ISO 4254-9:2018

This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function od combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

Standard
30 pages
English language
sale 10% off
e-Library read for
1 day
Draft
25 pages
English language
sale 10% off
e-Library read for
1 day

09-Aug-2015
22-Nov-2018
65.060.30
2006/42/EC
M/396
IMKG

ISO

ISO 4254-9:2018(Main)

Agricultural machinery — Safety — Part 9: Seed drills

This document, intended to be used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, and seed drills with integrated and inseparable powered soil-working tools used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document is also applicable to seeding systems where components for seed deposition in the soil, for seed metering and for seed storage are distributed between two or more linked vehicles. This document deals with all significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer, excepting the hazards arising from — electrostatic phenomena, — external influences on electrical equipment, — failure of energy supply, — failure and/or malfunction of the control system, — inadequate visibility from drivers'/operators' position, — travelling functions (drive, braking, etc.), — break down of parts rotating at high speed, — equipment for loading seeds (and fertilizer), and — moving parts for power transmission except for strength requirements for guards. This document is not applicable to — fertilizer distributors designed only for solid fertilizer application (covered in ISO 4254-8), — maintenance or repairs carried out by professional service personnel, or — to environmental hazards (except noise), and — to seed drills which are manufactured before the date of its publication. When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.

Standard
20 pages
English language
sale 15% off
Standard
20 pages
French language
sale 15% off

CEN

EN ISO 17962:2015(Main)

Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)

SIST EN ISO 17962:2015

ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds.
It is applicable to vacuum-style sowing systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere.
ISO 17962:2015 is not applicable to
-      conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters, and
-      conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device.
The design principles in this International Standard are not applicable to pneumatic equipment for sowing which was manufactured before the date of its publication.
NOTE          National or local requirements can apply which could be more stringent.

Standard
16 pages
English language
sale 10% off
e-Library read for
1 day

28-Jul-2015
30-Jan-2016
65.060.30
CEN/TC 144

SIST

SIST EN ISO 17962:2015(Main)

Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)

EN ISO 17962:2015

This International Standard (Technical Specification) specifies various means of minimizing the effects of fan exhaust from pneumatic systems for vacuum-style seeding (planting) agricultural field equipment used for sowing coated seeds. Application of design principles, use of calculations and testing methods are all acceptable means to minimize this fan exhaust.
It is applicable to vacuum-style planting (seeding) systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere.
This International Standard (Technical Specification) is not applicable to: ⎯ conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters;
⎯ conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device.
This International Standard (Technical Specification) is not applicable to pneumatic planting equipment which
was manufactured before the date of its publication.
NOTE National or local requirements can apply which could be more stringent.
NOTE Examples of systems are shown in Annex D.

Standard
16 pages
English language
sale 10% off
e-Library read for
1 day

31-Mar-2014
08-Sep-2015
65.060.30
IMKG

ISO

ISO 17962:2015(Main)

Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems

ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds. It is applicable to vacuum-style sowing systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere. ISO 17962:2015 is not applicable to - conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters, and - conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device. The design principles in this International Standard are not applicable to pneumatic equipment for sowing which was manufactured before the date of its publication. NOTE National or local requirements can apply which could be more stringent.

Standard
8 pages
English language
sale 15% off
Standard
8 pages
French language
sale 15% off

SIST

SIST ISO 6720:1995(Main)

Agricultural machinery -- Equipment for sowing, planting, distributing fertilizers and spraying -- Recommended working widths

ISO 6720:1989

This second edition cancels and replaces the first edition (1981). Specifies the working widths for equipment as a guideline for the manufacturers and users of these machines. Establishes a comllementary between the machines for sowing and planting (first operation) and the machines for subsequent operation. Tabulates the recommended working widths.

Standard
2 pages
English language
sale 15% off
Standard
4 pages
English language
sale 10% off
e-Library read for
1 day
Standard
2 pages
French language
sale 15% off
Standard
2 pages
French language
sale 15% off

ISO

ISO 6720:1989(Main)

Agricultural machinery — Equipment for sowing, planting, distributing fertilizers and spraying — Recommended working widths

SIST ISO 6720:1995

Standard
2 pages
English language
sale 15% off
Standard
4 pages
English language
sale 10% off
e-Library read for
1 day
Standard
2 pages
French language
sale 15% off
Standard
2 pages
French language
sale 15% off

ISO

ISO 7256-2:1984(Main)

Sowing equipment — Test methods — Part 2: Seed drills for sowing in lines

Specifies a standardized test method permitting reproducibility of tests when they are carried out in geographically remote areas and/or in different climatic conditions; the main objective being comparability for any one model of equipment. Annex A gives a programm of mandatory tests. Annex B includes optional tests. An example of test report is shown in annex C.

Standard
12 pages
English language
sale 15% off
Standard
12 pages
French language
sale 15% off
Standard
12 pages
French language
sale 15% off

31-Mar-1984
65.060.30
ISO/TC 23

ISO

ISO 7256-1:1984(Main)

Sowing equipment — Test methods — Part 1: Single seed drills (precision drills)

Specifies a standardized test method permitting reproducibility of test when they are carried out in geographically remote areas and/or different climatic conditions; the main objective being comparability for any one model equipment. Annex A gives performance of bench tests including six mandatory tests and an optional test. Annex B shows the device for measuring the depth of sowing. Annex C and D include the frequency of tests and a frequency histogram. Optional tests are given in annex E. An example of test report is show in annex F.

Standard
14 pages
English language
sale 15% off
Standard
14 pages
French language
sale 15% off
Standard
14 pages
French language
sale 15% off

29-Feb-1984
65.060.30
ISO/TC 23

ISO

ISO 5691:1981(Main)

Equipment for planting — Potato planters — Method of testing

Specifies a method of testing potato planters to obtain comparable and reproducible measurements with regard to uniform placement of tubers and other aspects of performance of the machine. Applies to all types of potato planters. An annex contains an example of a test report.

Standard
3 pages
English language
sale 15% off
Standard
4 pages
French language
sale 15% off
Standard
4 pages
French language
sale 15% off

30-Jun-1981
65.060.30
ISO/TC 23

ISO

ISO 4002-1:1979(Main)

Equipment for sowing and planting — Part 1: Concave disks type D1 — Dimensions

Establishes the dimensions of disks, with or without central hole. The table given the dimensions and fixing holes for sizes I to IV; the figure illustrates the various dimensions given and shows a section of the disk.

Standard
2 pages
English language
sale 15% off
Standard
2 pages
French language
sale 15% off
Standard
2 pages
French language
sale 15% off

31-Mar-1979
65.060.30
ISO/TC 23

ISO

ISO 4002-2:1977(Main)

Equipment for sowing and planting — Disks — Part 2: Flat disks type D2 with single bevel — Dimensions

Establishes the dimensions of disks, having either plain or ball/roller bearings. The table given the dimensions and fixing holes for outside diameters from 300 to 350 mm; the figure illustrates the various dimensions given and shows a section of the disk.

Standard
2 pages
English language
sale 15% off
Standard
2 pages
French language
sale 15% off
Standard
2 pages
French language
sale 15% off

30-Apr-1977
65.060.30
ISO/TC 23

SIST

SIST EN 14018:2006+A1:2010(Main)

Agricultural and forestry machinery - Seed drills - Safety

EN 14018:2005+A1:2009

This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: - fertilizer distributors designed only for solid fertilizer application (dealt with in EN 14017); - seed drills with integrated and inseparable powered soil working tools (see 3.2). This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: - electrostatic phenomena; - external influences on electrical equipment; - failure of energy supply; - failure, malfunction of control system; - inadequate visibility from drivers/operators position; - travelling functions (drive, braking etc.); - break-up of parts rotating at high speed; - equipment for loading seeds (and fertilizer). It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills. This European Standard is not applicable to seed drills which are manufactured before the date of its publication as EN.

Standard
28 pages
English language
sale 10% off
e-Library read for
1 day

18-Jan-2010
08-Nov-2018
65.060.30
2006/42/EC
98/37/EC
M/079
M/396
IMKG

CEN

EN 14018:2005+A1:2009(Main)

Agricultural and forestry machinery - Seed drills - Safety

SIST EN 14018:2006+A1:2010

This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
-   fertilizer distributors designed only for solid fertilizer application (dealt with in EN 14017);
-   seed drills with integrated and inseparable powered soil working tools (see 3.2).
NOTE   Powered soil working tools are dealt with in EN 708:1996 and EN 708:1996/A1:2000.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
-   electrostatic phenomena;
-   external influences on electrical equipment;
-   failure of energy supply;
-   failure, malfunction of control system;
-   inadequate visibility from drivers/operators position;
-   travelling functions (drive, braking etc.);
-   break-up of parts rotating at high speed;
-   equipment for loading seeds (and fertilizer).
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills.
This European Standard is not applicable to seed drills which are manufactured before the date of its

Standard
28 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST ISO 4254-9:1995(Main)

Tractors and machinery for agriculture and forestry -- Technical means for ensuring safety -- Part 9: Equipment for sowing, planting and distributing fertilizers

ISO 4254-9:1992

Specifies technical means of improving the degree of personal safety of operators and others. Applies additionally to ISO 4254-1.

Standard
4 pages
English language
sale 15% off
Standard
6 pages
English language
sale 10% off
e-Library read for
1 day
Standard
4 pages
French language
sale 15% off
Standard
4 pages
French language
sale 15% off

31-Aug-1995
29-Oct-2013
65.060.25
65.060.30
IMKG

SIST

SIST EN 14018:2006(Main)

Agricultural and forestry machinery - Seed drills - Safety

EN 14018:2005

This European Standard, applied together with EN 1553, specifies the safety requirements and their verification for design and construction of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this European Standard are different from those which are stated in EN 1553 the requirements of this European Standard take precedence over the requirements of EN 1553 for machines that have been designed and built according to the provisions of this European Standard.
It does not apply to:
   fertilizer distributors designed only for solid fertilizer application (dealt with in prEN 14017);
   seed drills with integrated and inseparable powered soil working tools (see 3.2).
NOTE   Powered soil working tools are dealt with in EN 708:1996 and EN 708:1996/A1:2000.
This European Standard deals with all the significant hazards, hazardous situations and events relevant to seed drills, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:
   electrostatic phenomena;
   external influences on electrical equipment;
   failure of energy supply;
   failure, malfunction of control system;
   inadequate visibility from drivers/operators position;
   travelling functions (drive, braking etc.);
   break-up of parts rotating at high speed;
   equipment for loading seeds (and fertilizer).
It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13740-1:2003 and EN 13740-2:2003 for combined seed and solid fertilizer drills.
This European Standard is not applicable to seed drills which are manufactured before the date of its publication.

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

28-Feb-2006
19-Jan-2010
65.060.30
98/37/EC
M/BC/CEN/91/1
IMKG

CEN

EN 14018:2005(Main)

Agricultural and forestry machinery - Seed drills - Safety

SIST EN 14018:2006

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

18-Oct-2005
13-Oct-2009
65.060.30
98/37/EC
M/BC/CEN/91/1
CEN/TC 144

ISO

ISO 4254-9:2008(Main)

Agricultural machinery — Safety — Part 9: Seed drills

ISO 4254-9:2008, used together with ISO 4254-1, specifies the safety requirements, and their verification for design and construction, of mounted, semi-mounted, trailed or self-propelled seed drills, including the seeding function of combined seed and fertilizer drills, used in agriculture and horticulture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of ISO 4254-9:2008 are different from those which are stated in ISO 4254-1 the requirements of ISO 4254-9:2008 take precedence over the requirements of ISO 4254-1. ISO 4254-9:2008 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to seed drills, used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from external influences on electrical equipment, failure of energy supply, failure or malfunction of the control system, break-up of parts rotating at high speed, equipment for loading seeds (and fertilizer). ISO 4254-9:2008 is not applicable to seed drills with integrated and inseparable powered soil-working tools. It is not applicable to environmental hazards or electromagnetic compatibility; neither is it applicable to hazards related to maintenance or repairs carried out by professional service personnel. It is not applicable to machines which are manufactured before the date of its publication.