1.1   General
This document specifies the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, intended for use on urban rail. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative. Where a machine is designed and intended for use on mainline and urban rail, the machine will comply with the most onerous conditions of FprEN 15746-1 and FprEN 15746-4. In all cases the machine will comply with the requirements set out in FprEN 15746-2.
The requirements in this document amend those in FprEN 15746-1 as required for the use of the machine on urban railways.
This document does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager;
-   moving and working while not on rails;
-   separate machines temporarily mounted on machines and associated equipment.
This document does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b)).
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
(...)

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines, as defined in FprEN 15746-1:2019, 3.1, henceforward referred to as machines, when designed and intended for running on European railways within the scope of European Directive 2007/58/EC.
The running mode is an option designed by the manufacturer which permits the use of the machine on a specified railway infrastructure without the need for special operational rules.
NOTE 1   The use of special track safety equipment (i.e. part of automatic train protection systems) does not necessarily mean that the machine has a running mode; some Infrastructure Managers use such equipment as means of protection for machines in travelling and/or working modes.
NOTE 2   This document is written for 1 435 mm nominal track gauge, special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines.
Urban rail and railways utilizing other than adhesion between the rail and wheels are not included in this document.
This document does not apply to the following:
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Infrastructure Manager;
-   travelling and working both on and off rails;
-   running on urban rail.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
1.2   Validity of this document
This document applies to all machines which are within the scope of the Commission Regulation (EU) No 1302/2014 for locomotives and passenger rolling stock.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the following elements for urban rail rolling stock:
-   the functional requirements for a communication device between passengers and driver or Operations Control Centre (OCC);
-   the dynamic behaviour of the Communication device.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
-   (I) Metros;
-   (II) Trams;
-   (III) Light Rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
This document applies to rolling stock both with and without driver.
NOTE 2   The communication device is different from the PAS, but it can share some parts of the PAS to achieve its functionalities.
NOTE 3   The PAS is regarded as a safety relevant system whereas communication device is non-safety relevant aid to passengers.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard is applicable to rail fastening systems used with grooved rails for tram and light rail tracks, including tracks embedded in streets.
The requirements apply to:
-   fastening systems which act on the foot and/or web of the rail including direct and indirect fastening systems;
-   fastening systems for the rail sections in EN 14811
This standard is not applicable to fastening systems for other rail sections or special fastening systems used at bolted joints or glued joints.
This standard is for type approval of a complete fastening assembly only.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
-   the safety related requirements;
-   the functional requirements of PAS triggered by pasasengers;
-   the requirements for the communication channel between passengers and the driver or OCC;
-   the requirements for the functional behaviour of the PAS;
-   the requirements for the degraded modes management;
-   the requirements for the Passenger Alarm Device (PAD) and PAD area.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
-   (I) metros;
-   (II) trams;
-   (III) light rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
NOTE 2   The PAS function on existing vehicles may require modification to work in conjunction with vehicles that comply with this document.
NOTE 3   This European Standard covers urban rail rolling stock, both with or without a driver.
NOTE 4   For rolling stock devoted to suburban passenger services, this European Standard applies when the TSIs do not apply.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
- the safety related requirements;
- the functional requirements of PAS triggered by passengers;
- the requirements for the communication channel between passengers and the driver or Operations Control Centre (OCC);
- the requirements for the functional behaviour of the PAS;
- the requirements for the degraded modes management;
- the requirements for the Passenger Alarm Device (PAD) and PAD area.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
- (I) metros;
- (II) trams;
- (III) light rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
NOTE 2   The PAS function on existing vehicles may require modification to work in conjunction with vehicles that comply with this document.
NOTE 3   This document covers urban rail rolling stock, both with or without a driver.
NOTE 4   For rolling stock devoted to suburban passenger services, this document applies when the TSIs do not apply.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to tram vehicles according to prEN 17343. Tram-Train vehicles, on track machines, infrastructure inspection vehicles and road-rail machines according to prEN 17343 and demountable machines/machinery are not in the Scope of this Technical Report.
This document describes passive safety measures to reduce the consequences of collisions with pedestrians. These measures provide the last means of protection when all other possibilities of preventing an accident have failed, i.e.:
-   design recommendations for the vehicle front to minimize the impact effect on a pedestrian when hit,
-   design recommendations for the vehicle front end for side (lateral) deflections in order to minimize the risk of being drawn under the vehicle on flat ground (embedded track),
-   design recommendations for the vehicle body underframe to not aggravate injuries to a pedestrian/body lying on the ground,
-   recommendations to prevent the pedestrian from being over-run by the leading wheels of the vehicle.
The following measures to actively improve safety are not in the Scope of this document:
-   colour of front;
-   additional position lights;
-   additional cameras;
-   driver assistance systems;
-   additional acoustic warning devices, etc.;
-   view of the driver / mirrors;
-   consequences for pedestrian injuries due to secondary impact with infrastructure (side posts, concrete ground, poles, trees, etc.).
The recommendations of this document only apply to new vehicles.

  • Technical report
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the functional and technical requirements for exterior visible warning devices for urban rail vehicles as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems.
This European Standard also defines the requirements for testing and conformity assessment.
NOTE   The requirements for exterior visible warning devices for mainline rail are found in prEN 15153-1.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard defines warning horn requirements which deliver the required audibility of approaching high speed trains and conventional trains, excluding road, metro and self-contained systems. For this purpose, the following requirements are included:
-   functional and technical requirements of the warning horn as a component,
-   functional and technical requirements of the integration of warning horns into the vehicle, and
-   test requirements.
Operational requirements for warning horns have been excluded.
NOTE   The requirements for the control of warning horns can be found in EN 16186-2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the acoustic requirements and the test requirements for warning horns, bells (single and recurring sound) and whistles for urban rail vehicles as defined in the CEN CENELEC Guide 26, i.e. metro systems, trams, light rail, and 'local rail' systems. Additionally, the requirements for 'tram/trains' are included.
NOTE   The requirements for audible warning devices for mainline rail are found in prEN 15153-2.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the functional and technical requirements for head, marker and tail lamps for high speed trains and conventional trains, excluding road, metro and self-contained systems.
This European Standard also defines the requirements for testing and conformity assessment.
Portable lamps are excluded from the scope of this European Standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the functional and technical requirements for exterior visible warning devices for urban rail vehicles as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems.
This European Standard also defines the requirements for testing and conformity assessment.
NOTE The requirements for exterior visible warning devices for heavy rail vehicles are found in EN 15153–1.
The decision was taken by simple majority with 14 positive vote(s), 0 negative vote(s) and 9 abstention(s).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This technical report is applicable to tram vehicles according to EN 17343. Tram-Train vehicles, on track machines, infrastructure inspection vehicles and road-rail machines according to EN 17343 and demountable machines/machinery are not in the scope of this
technical report.
This technical report describes passive safety measures to reduce the consequences of collisions with pedestrians. These measures provide the last means of protection when all other possibilities of preventing an accident have failed, i.e.
- Design recommendations for the vehicle front to minimize the impact effect on a pedestrian when hit,
- Design recommendations for the vehicle front end for side (lateral) deflections in order to minimize the risk of being drawn under the vehicle on flat ground (embedded track),
- Design recommendations for the vehicle body underframe to not aggravate injuries to a pedestrian/body lying on the ground,
- Recommendations to prevent the pedestrian from being over-run by the leading wheels of the vehicle.
The following measures to actively improve safety are not in the scope of this technical report:
- Colour of front;
- Additional position lights;
- Additional cameras;
- Driver assistance systems;
- Additional acoustic warning devices, etc.;
- View of the driver / mirrors;
- Consequences for pedestrian injuries due to secondary impact with infrastructure (side posts, concrete ground, poles, trees, etc.).
The recommendations of this technical report only apply to new vehicles.

  • Technical report
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines warning horn requirements that deliver the required audibility of approaching heavy rail vehicles. The requirements of this document do not apply to urban rail systems.
NOTE 1   The requirements for exterior audible warning devices for urban rail vehicles are found in EN 15153 4.
In the case of shunting heavy rail vehicle formations, the requirements of this document do not apply to the pushed vehicle(s).
For this purpose, the following requirements are included:
-   functional and technical requirements of the warning horn as a component,
-   functional and technical requirements of the integration of warning horns into the vehicle, and
-   test requirements.
Operational requirements and maintenance requirements for warning horns are excluded.
NOTE 2   The requirements for the control of warning horns can be found in EN 16186 2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the functional and technical requirements for head, marker and tail lamps for heavy rail units, excluding road, metro and self-contained systems.
This document also defines the requirements for testing and conformity assessment.
Lamps designed for special purposes, for example illumination of third rail, are excluded from the scope of this document.
Portable lamps are excluded from the scope of this document.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the functional and technical requirements for exterior audible warning devices for urban rail vehicles as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems.
This document also defines the requirements for testing and conformity assessment.
NOTE    The requirements for exterior audible warning devices for heavy rail vehicles are found in EN 15153 2:2020.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. Metro Systems, Trams, Light Rail, and Local Rail Systems, under all operating and emergency conditions.
This European Standard also defines the requirements for testing and conformity assessment.
This European Standard does not address lighting installed in instruments or controls.
This European Standard does not address lighting installed for indication purposes, including flashing lights and effect lighting.
NOTE 1   The requirements for interior lighting for trains can be found in prEN 13272-1
NOTE 2   The requirements for cab instrument lighting can be found in EN 16186-2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1   The requirements for interior lighting for heavy rail vehicles can be found in EN 13272-1.
NOTE 2   The requirements for cab instrument lighting for heavy rail vehicles can be found in EN 16186-2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport heavy rail units, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address the requirements of lighting of boarding aids, e.g. moving entrance stairs or lifts.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1   The requirements for interior lighting for urban rail units can be found in EN 13272-2.
NOTE 2    The requirements for cab instrument lighting for heavy rail units can be found in EN 16186-2.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN 14033-1 to -3 as required for the use of the machine on urban railways. Where a machine is designed and intended for use on mainline and urban rail, compliance with the most onerous conditions of EN 14033-1 and EN 14033-4 will be required.
This European Standard does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager;
-   moving and working whilst not on rails.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. in tunnels or cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b))1.
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
-   (III) Light Rail: Light Rail is defined as a UGT system operated in parts of the system not segregated from general road and pedestrian traffic, and in parts of the system with segregated right-of-way. The segregation may include some sections of line where inadvertent access is not possible.
-   (IV) Local rail systems which by national decision complying with Article 1 (3) a) or b) of Directive 2008/57/EC may be excluded from the European Community Rail System.
NOTE   Such systems connect city centres with their suburban hinterland or regional local centres. (....)

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document deals with the technical requirements to minimize the specific railway hazards of railbound construction and maintenance machines - henceforward referred to as machines, intended for use on urban rail systems. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative.
The requirements in this standard amend those in EN 14033-1 to −3 as required for the use of the machine on urban rail systems. Where a machine is designed and intended for use on mainline and urban rail systems, compliance with the most onerous conditions of EN 14033-1 to −3 and EN 14033-4 will be required.
This document does not apply to the following:
-   requirements for quality of the work or performance of the machine;
-   machines moving and working whilst not on rails;
-   specific requirements established by the machine owner and/or operating company for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager.
This document does not establish additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. in tunnels or cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards that may occur when a machine is used to handle suspended loads which may swing freely.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail systems
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b))1.
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
-   (III) Light Rail: Light Rail is defined as a UGT system operated in parts of the system not segregated from general road and pedestrian traffic, and in parts of the system with segregated right-of-way. The segregation may include some sections of line where inadvertent access is not possible.
-   (IV) Local rail systems which by national decision complying with Article 1 (3) a) or b) of Directive 2008/57/EC may be excluded from the European Community Rail System.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time.
This document is applicable to seamless steel and seamless aluminium-alloy transportable gas cylinders (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity from 0,5 l up to 150 l and to seamless steel and seamless aluminium-alloy transportable gas tubes (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity greater than 150 l. It also applies, as far as practical, to cylinders of less than 0,5 l water capacity.
This document does not apply to the periodic inspection and maintenance of acetylene cylinders or to the periodic inspection and testing of composite cylinders.
NOTE Unless noted by exception, the use of the word "cylinder" in this document refers to both cylinders and tubes.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    65 pages
    German language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document specifies the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, intended for use on urban rail. These hazards can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative. Where a machine is designed and intended for use on mainline and urban rail, the machine will comply with the most onerous conditions of FprEN 15746-1 and FprEN 15746-4. In all cases the machine will comply with the requirements set out in FprEN 15746-2.
The requirements in this document amend those in FprEN 15746-1 as required for the use of the machine on urban railways.
This document does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Urban Rail Manager;
-   moving and working while not on rails;
-   separate machines temporarily mounted on machines and associated equipment.
This document does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover Urban Guided Transport systems (UGT) and might include other rail systems excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b)).
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
(...)

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the following elements for urban rail rolling stock:
-   the functional requirements for a communication device between passengers and driver or operations control centre (OCC);
-   the dynamic behaviour of the communication device.
This document is applicable to the categories I to III of urban rail rolling stock defined in CEN/CLC Guide 26:
-   (I) Metros;
-   (II) Trams;
-   (III) Light Rail.
NOTE 1   CEN/CLC Guide 26 defines metro, tram and light rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
This document applies to urban rail rolling stock both with and without driver.
NOTE 2   The communication device is different from the PAS, but it can share some parts of the PAS to achieve its functionalities.
NOTE 3   The PAS is regarded as a safety relevant system whereas communication device is non-safety relevant aid to passengers.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to fastening systems used with grooved rails for tram, urban rail and industrial tracks, with maximum design axle loads and minimum curve radii in accordance with Table 1.
This document is for type approval of a complete fastening assembly only.
Table 1
The requirements apply to fastening systems for the grooved rail profiles in EN 14811 which act on the foot and/or web of the rail.
This document is not applicable to fastening systems for other rail sections or special fastening systems used at bolted joints or glued joints or in switches and crossings for grooved rails.
NOTE   Requirements for fastenings for use with Vignole rails are included in the EN 13481 series of standards.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This document deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines, as defined in EN 15746 1:2020, 3.1, henceforward referred to as machines, when designed and intended for running on European railways within the scope of European Directive 2007/58/EC.
The running mode is an option designed by the manufacturer which permits the use of the machine on a specified railway infrastructure without the need for special operational rules.
NOTE 1   The use of special track safety equipment (i.e. part of automatic train protection systems) does not necessarily mean that the machine has a running mode; some Infrastructure Managers use such equipment as means of protection for machines in travelling and/or working modes.
NOTE 2   This document is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines.
Urban rail and railways utilizing other than adhesion between the rail and wheels are not included in this document.
This document does not apply to the following:
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the Infrastructure Manager;
-   travelling and working both on and off rails;
-   running on urban rail.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
1.2   Validity of this document
This document applies to all machines which are within the scope of the Commission Regulation (EU) No 1302/2014 for locomotives and passenger rolling stock.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies rules and limits for track alignment design parameters, including alignments within switches and crossings. Several of these limits are functions of speed. Alternatively, for a given track alignment, it specifies rules and limits that determine permissible speed with regards to track alignment.
This document applies to urban or suburban rail networks for passenger services not integrated with the national network.
Sections of urban or suburban rail networks integrated in the national rail networks are not covered by this document. They are covered by EN 13803 (or for nominal track gauges smaller than 1 435 mm by national alignment rules).
For the purpose of this document, urban or suburban rail networks include:
-   Networks designed for own right of way and segregated from general road and pedestrian traffic,
and
-   Networks (partly) not segregated from general road and pedestrian traffic, with shared lanes.
This document applies to rail systems with steel wheels running on steel vignole or grooved rails. Rail systems with specific construction issues (e.g. rack railways, funicular railways and other types of cable drawn rail systems) are not covered by this document.
This document defines the parameters, rules and limits for nominal track gauges of 1 435 mm and 1 000 mm with permissible speeds up to 120 km/h. For other nominal track gauges, this document defines conversion rules which shall be used to define the limits.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies all necessary design rules and associated assessment criteria as well as guidance concerning the design of information and the corresponding user interfaces of driver’s cabs of EMU, DMU, Railcars, Locomotives and Driving trailers.
NOTE 1   This standard applies to rolling stock in the scope of the Directive 2008/57/EC.
It considers the tasks the driver has to carry out and human factors. This standard specifies how information is arranged and displayed. It is explicitly applicable to display applications like TRD, ETD, CCD and TDD and may be completed by the CLC/TS 50459 series.
This standard is not applicable to legacy ATP systems. If requirements in this standard are in conflict with the ERA DMI document (ERA_ERTMS_015560) the requirements of the ERA DMI document should prevail for the CCD ETCS application.
NOTE 2   For resolving any discrepancies (e.g. 5.4.2.3) ERA is expected to harmonize the usage philosophy of the ERA DMI with this standard.
All assessments based on the normative requirements of this standard are applicable mainly to
- symbols provided by Annex A,
- arrangement of screen areas conform with Figure 1 (generic organization of information),
- colours, fonts,
- audible information.
This standard is applicable to the following aspects:
- legibility and intelligibility of displayed information: general rules concerning the layout of information on the displays, including character size and spacing;
- definition of harmonized colours, symbols, etc.;
- definition of harmonized principles for the command interface (by physical or touchscreen buttons): size, symbols, reaction time, way to give feedback to the driver, etc.;
- general arrangements (dialogue structures, sequences, layout philosophy, colour philosophy), symbols, audible information, data entry arrangements.
NOTE 3 If this standard deals with how information can be given for operation and in degraded situations, it does not define operating rules and degraded situations.
This standard does not request any safety requirement related with displayed information.
This standard specifies minimum requirements and does not prevent more complex solutions.
Requirements describing the functions using the display are out of scope of this standard.
This standard is not intended to be applicable for tramway, metros and light rail vehicles.

  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
- requirements for the fixed structure and fixed parts along the platform;
- physical requirements for the movable doors and gates normally used by passengers;
- requirements for emergency doors;
- requirements for driver access doors;
- requirements for platform extremity doors;
- requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
- synchronization of vehicle and platform barrier doors or gates;
- audible and visible alerts;
- integrity of control systems;
- testing of the barrier installation;
- operational performance;
- requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including infrastructure owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction.  
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the external front and rear visibility conditions for cabs of tram vehicles and the associated assessment method.
The requirements of this document apply to vehicles operating on tram networks.
This document does not apply to refurbishment of existing vehicles.
This document does not apply to driver's auxiliary cabs.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines as defined in prEN 15746 1:2015, 3.5, henceforward referred to as machines - when designed and intended for running on European railways within the scope of European Directive 2007/58/EC.
The running mode is an option designed by the manufacturer which permits the use of the machine on a specified railway infrastructure without the need for special operational rules.
NOTE   The use of special track safety equipment (i.e. part of automatic train protection systems) does not necessarily infer that the machine has a running mode, some infrastructure managers use such equipment as means of protection for machines in travelling and/or working modes.
This European Standard does not apply to the following:
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the infrastructure manager;
-   travelling and working both on and off rails;
-   running on urban rail.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
1.2   Validity of this European Standard
This European Standard applies to all machines which are within the scope of the Commission Regulation (EU) No 1302/2014 for locomotives and passenger rolling stock.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative when designed and intended for running, travelling and/or working on urban railways only. Where a machine is designed and intended for use on mainline and urban rail the most onerous conditions of prEN 15746 1 and prEN 15746 4 will need to be complied with.
The requirements in this standard amend those in prEN 15746 1 as required for the use of the machine on urban railways.
This European Standard does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the controller of an urban railway;
-   moving and working while not on rails;
-   separate machines temporarily mounted on machines and associated equipment.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover both Urban Guided Transport systems (UGT) and other rail systems which might be excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b)).
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
(...)

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies rules and limits for track alignment design parameters, including alignments within switches and crossings. Several of these limits are functions of speed. Alternatively, for a given track alignment, it specifies rules and limits that determine permissible speed with regards to track alignment.
This document applies to urban or suburban rail networks for passenger services not integrated with the national network.
Sections of urban or suburban rail networks integrated in the national rail networks are not covered by this document. They are covered by EN 13803 (or for nominal track gauges smaller than 1 435 mm by national alignment rules).
For the purpose of this document, urban or suburban rail networks include:
-   Networks designed for own right of way and segregated from general road and pedestrian traffic,
and
-   Networks (partly) not segregated from general road and pedestrian traffic, with shared lanes.
This document applies to rail systems with steel wheels running on steel vignole or grooved rails. Rail systems with specific construction issues (e.g. rack railways, funicular railways and other types of cable drawn rail systems) are not covered by this document.
This document defines the parameters, rules and limits for nominal track gauges of 1 435 mm and 1 000 mm with permissible speeds up to 120 km/h. For other nominal track gauges, this document defines conversion rules which shall be used to define the limits.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines as defined in prEN 15746 1:2015, 3.5, henceforward referred to as machines - when designed and intended for running on European railways within the scope of European Directive 2007/58/EC.
The running mode is an option designed by the manufacturer which permits the use of the machine on a specified railway infrastructure without the need for special operational rules.
NOTE   The use of special track safety equipment (i.e. part of automatic train protection systems) does not necessarily infer that the machine has a running mode, some infrastructure managers use such equipment as means of protection for machines in travelling and/or working modes.
This European Standard does not apply to the following:
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the infrastructure manager;
-   travelling and working both on and off rails;
-   running on urban rail.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
1.2   Validity of this European Standard
This European Standard applies to all machines which are within the scope of the Commission Regulation (EU) No 1302/2014 for locomotives and passenger rolling stock.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the design, construction and operation of platform barrier systems positioned at the edge of a station platform immediately adjacent to rail or other guided vehicles in stations and boarding points for passenger services and includes:
- requirements for the fixed structure and fixed parts along the platform;
- physical requirements for the movable doors and gates normally used by passengers;
- requirements for emergency doors;
- requirements for driver access doors;
- requirements for platform extremity doors;
- requirements for management of safety risks that are particular to barrier systems.
This European Standard also gives requirements for the integration of barriers with the overall rail system including:
- synchronization of vehicle and platform barrier doors or gates;
- audible and visible alerts;
- integrity of control systems;
- testing of the barrier installation;
- operational performance;
- requirements relating to other interfacing sub-systems, notably signalling and vehicles.
For barrier systems set back from the platform edge, which are used to control access to trains or for crowd management, relevant sections of the document can be used as guidance.
This European Standard applies to all actors involved in the implementation and system integration of a platform barrier system, including infrastructure owners, designers, installers and operators.
This European Standard does not cover barrier systems using bars, ropes, etc. or which operate in a vertical direction.  
This European Standard applies to light rail services, e.g. metro and tramway systems and heavy rail services as requested by a project specification. It applies to small systems, working in conjunction with a single vehicle, or with larger systems working with a complete train.
This European Standard applies to platform barrier systems used at sub-surface stations, enclosed surface stations (e.g. those enclosed for the purposes of providing an air-conditioned environment for waiting passengers), and those fully in the open-air.
This European Standard does not cover normative requirements relating to fire performance or fire requirements arising from use of platform barrier systems as fire barriers.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies all necessary design rules and associated assessment criteria as well as guidance concerning the design of information and the corresponding user interfaces of driver’s cabs.
It considers the tasks the driver has to carry out and human factors. This document specifies how information is arranged and displayed. It is explicitly applicable to display applications like TRD, ETD, CCD and TDD and may be completed by the CLC/TS 50459 series.
This document is not applicable to legacy ATP systems. If requirements in this document are in conflict with the ERA DMI document (ERA_ERTMS_015560) the requirements of the ERA DMI document should prevail for the CCD ETCS application.
NOTE 1   For resolving any discrepancies (e.g. 5.4.2.3) ERA is expected to harmonize the usage philosophy of the ERA DMI with this document.
All assessments based on the normative requirements of this document are applicable mainly to
- symbols provided by Annex A,
- arrangement of screen areas conform with Figure 1 (generic organization of information),
- colours, fonts,
- audible information.
This document is applicable to the following aspects:
- legibility and intelligibility of displayed information: general rules concerning the layout of information on the displays, including character size and spacing;
- definition of harmonized colours, symbols, etc.;
- definition of harmonized principles for the command interface (by physical or touchscreen buttons): size, symbols, reaction time, way to give feedback to the driver, etc.;
- general arrangements (dialogue structures, sequences, layout philosophy, colour philosophy), symbols, audible information, data entry arrangements.
NOTE 2   If this document deals with how information can be given for operation and in degraded situations, it does not define operating rules and degraded situations.
This document does not request any safety requirement related with displayed information.
This document specifies minimum requirements and does not prevent more complex solutions.
Requirements describing the functions using the display are out of scope of this document.
This document applies to driver’s cabs of locomotives and driving vehicles of the heavy rail system.
EXAMPLES   Locomotives, railcars, power heads, driving trailers.
This standard is not applicable for vehicles of urban rail systems.

  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   General
This European Standard deals with the technical requirements to minimize the specific railway hazards of self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorized representative when designed and intended for running, travelling and/or working on urban railways only. Where a machine is designed and intended for use on mainline and urban rail the most onerous conditions of prEN 15746 1 and prEN 15746 4 will need to be complied with.
The requirements in this standard amend those in prEN 15746 1 as required for the use of the machine on urban railways.
This European Standard does not apply to the following:
-   the requirements for quality of the work or performance of the machine;
-   the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the controller of an urban railway;
-   moving and working while not on rails;
-   separate machines temporarily mounted on machines and associated equipment.
This European Standard does not establish the additional requirements for the following:
-   operation subject to special rules, e.g. potentially explosive atmospheres;
-   hazards due to natural causes, e.g. earthquake, lightning, flooding;
-   working methods;
-   operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields;
-   hazards occurring when used to handle suspended loads which may swing freely.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this European Standard.
Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex B.
1.2   Scope of urban rail
Urban rail systems cover both Urban Guided Transport systems (UGT) and other rail systems which might be excluded from the scope of the Interoperability Directive 2008/57/EC (Article 1.3 (a) and (b)).
Urban Guided Transport systems (UGT), which cover metro, tram and light rail, are defined as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
Categories of urban rail systems include:
-   (I) Metros: UGT systems operated on their own right of way and segregated from general road and pedestrian traffic. They are consequently designed for operations in tunnel, viaducts or on surface level but with physical separation in such a way that inadvertent access is not possible. In different parts of the world, Metro systems are also known as the underground, the subway or the tube. Rail systems with specific construction issues operating on a segregated guideway (e.g. monorail, rack railways) are also treated as Metros as long as they are designated as part of the urban public transport network.
-   (II) Trams: UGT systems not segregated from general road and pedestrian traffic, which share their right of way with general road and/or pedestrian traffic and are therefore embedded in their relevant national road traffic legislation (highway codes and specific adaptations).
(...)

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes methods of classification of existing and new railway lines and the categorisation of vehicles. The standard specifies the technical requirements for ensuring the compatibility of the interface between vehicle and infrastructure. The standard is suitable for use on freight, passenger and mixed traffic lines and contains requirements relevant to: - classification of the vertical load carrying capacity of railway infrastructure; - design of railway vehicles; - determination of payload limits of freight wagons. A summary of the classification of infrastructure and categorisation of vehicles is given in Annex B. The assessment of the vertical load carrying capacity of civil engineering structures, track, sub-grade and earthworks by the use of the load models defined in Annex A permits the classification of infrastructure into line categories. This European Standard identifies on which lines vehicles are compatible to the infrastructure under normal operation conditions without further checks regarding vertical load effects. The methodology described in this European Standard is not valid for high speed rail traffic. Tilting traffic and the working of rail mounted plant and cranes etc. are also outside the scope of this European Standard. This European Standard does not cover the system used in Great Britain, where all lines and vehicles are to be classified in accordance with the RA (Route Availability) System. A guide to the equivalent categories in accordance with this European Standard is given in Annex C. This European Standard does not cover requirements relating to the maximum total mass or maximum length of a train. The requirements of this European Standard do not replace regulations relating to e.g. dynamic wheel/rail contact force limits, vehicle ride considerations, vehicle structural design limitations, etc.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes methods of classification of existing and new railway lines and the categorisation of vehicles. The standard specifies the technical requirements for ensuring the compatibility of the interface between vehicle and infrastructure. The standard is suitable for use on freight, passenger and mixed traffic lines and contains requirements relevant to:
-   classification of the vertical load carrying capacity of railway infrastructure;
-   design of railway vehicles;
-   determination of payload limits of freight wagons.
A summary of the classification of infrastructure and categorisation of vehicles is given in Annex B.
The assessment of the vertical load carrying capacity of civil engineering structures, track, sub-grade and earthworks by the use of the load models defined in Annex A permits the classification of infrastructure into line categories.
This European Standard identifies on which lines vehicles are compatible to the infrastructure under normal operation conditions without further checks regarding vertical load effects.
The methodology described in this European Standard is not valid for high speed rail traffic. Tilting traffic and the working of rail mounted plant and cranes etc. are also outside the scope of this European Standard. This European Standard does not cover the system used in Great Britain, where all lines and vehicles are to be classified in accordance with the RA (Route Availability) System. A guide to the equivalent categories in accordance with this European Standard is given in Annex C.
This European Standard does not cover requirements relating to the maximum total mass or maximum length of a train.
The requirements of this European Standard do not replace regulations relating to e.g. dynamic wheel/rail contact force limits, vehicle ride considerations, vehicle structural design limitations, etc.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day