Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements (ISO 17178:2013)

ISO 17178:2013 specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength, tensile strength to be achieved with these adhesives.
ISO 17178:2013 does not refer to the selection and installation of parquet floorings.

Klebstoffe - Klebstoffe für das Kleben von Parkett auf einen Untergrund - Prüfverfahren und Mindestanforderungen (ISO 17178:2013)

Diese Internationale Norm legt Prüfverfahren für Klebstoffe fest, die für die Klebung von Parkett und ähnlichen Holzböden auf einen Untergrund bestimmt sind. Außerdem legt sie die Mindestanforderungen an die Scherfestigkeit und die Haftzugfestigkeit fest, die mit diesen Klebstoffen erreicht werden soll.
Diese Internationale Norm bezieht sich nicht auf die Auswahl und Verlegung von Parkettfußböden.

Adhésifs - Adhésifs pour le collage de parquet au sol - Méthodes d'essai et exigences minimales (ISO 17178:2013)

L'ISO 17178:2013 spécifie des méthodes d'essai applicables aux adhésifs destinés au collage du parquet, et de tous revêtements de sol similaires en bois, sur le sol. Elle spécifie également les exigences minimales en matière de résistance au cisaillement et de résistance à la traction auxquelles ces adhésifs doivent satisfaire.
Le choix et l'installation des parquets ne sont pas traités dans l'ISO 17178:2013.

Lepila - Lepila za lepljenje parketa na podlago - Preskusne metode in minimalne zahteve (ISO 17178:2013)

General Information

Status
Published
Publication Date
07-Apr-2020
Withdrawal Date
30-Oct-2020
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Apr-2020
Due Date
28-Feb-2022
Completion Date
08-Apr-2020

Relations

Buy Standard

Standard
EN ISO 17178:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17178:2020
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17178:2020
01-junij-2020
Nadomešča:
SIST EN 14293:2006
Lepila - Lepila za lepljenje parketa na podlago - Preskusne metode in minimalne
zahteve (ISO 17178:2013)
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum
requirements (ISO 17178:2013)
Klebstoffe - Klebstoffe für das Kleben von Parkett auf einen Untergrund - Prüfverfahren
und Mindestanforderungen (ISO 17178:2013)
Adhésifs - Adhésifs pour le collage de parquet au sol - Méthodes d'essai et exigences
minimales (ISO 17178:2013)
Ta slovenski standard je istoveten z: EN ISO 17178:2020
ICS:
83.180 Lepila Adhesives
SIST EN ISO 17178:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 17178:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 17178:2020


EN ISO 17178
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 14293:2006
English Version

Adhesives - Adhesives for bonding parquet to subfloor -
Test methods and minimum requirements (ISO
17178:2013)
Adhésifs - Adhésifs pour le collage de parquet au sol - Klebstoffe - Klebstoffe für das Kleben von Parkett auf
Méthodes d'essai et exigences minimales (ISO einen Untergrund - Prüfverfahren und
17178:2013) Mindestanforderungen (ISO 17178:2013)
This European Standard was approved by CEN on 28 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17178:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 17178:2020
EN ISO 17178:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 17178:2020
EN ISO 17178:2020 (E)
European foreword
The text of ISO 17178:2013 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 17178:2020 by
Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14293:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 17178:2013 has been approved by CEN as EN ISO 17178:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 17178:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 17178:2020
INTERNATIONAL ISO
STANDARD 17178
First edition
2013-04-15
Adhesives — Adhesi
...

SLOVENSKI STANDARD
oSIST prEN ISO 17178:2020
01-februar-2020
Lepila - Lepila za lepljenje parketa na podlago - Preskusne metode in minimalne
zahteve (ISO 17178:2013)
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum
requirements (ISO 17178:2013)
Klebstoffe - Klebstoffe für das Kleben von Parkett auf einen Untergrund - Prüfverfahren
und Mindestanforderungen (ISO 17178:2013)
Adhésifs - Adhésifs pour le collage de parquet au sol - Méthodes d'essai et exigences
minimales (ISO 17178:2013)
Ta slovenski standard je istoveten z: prEN ISO 17178
ICS:
83.180 Lepila Adhesives
oSIST prEN ISO 17178:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17178:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17178:2020
INTERNATIONAL ISO
STANDARD 17178
First edition
2013-04-15
Adhesives — Adhesives for bonding
parquet to subfloor — Test methods
and minimum requirements
Adhésifs — Adhésifs pour le collage de parquet au sol — Méthodes
d’essai et exigences minimales
Reference number
ISO 17178:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17178:2020
ISO 17178:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17178:2020
ISO 17178:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods and procedures . 2
4.1 Sampling and test conditions . 2
4.2 Test method for determining shear strength . 2
4.3 Test method for the determination of tensile strength . 4
4.4 Test method for determining shear strength of hard elastic and elastic adhesives . 6
5 Test report . 9
6 Minimum requirements . 9
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 17178:2020
ISO 17178:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.