iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 20695:2020

(Main)

Enteral feeding systems - Design and testing (ISO 20695:2020)

Enteral feeding systems - Design and testing (ISO 20695:2020)

This document specifies requirements for enteral feeding systems comprising enteral giving sets, enteral extension sets, enteral syringes, enteral feeding catheters, and enteral accessories.
This document is not applicable to oral syringes.

Systeme zur enteralen Ernährung - Ausführung und Prüfung (ISO 20695:2020)

Dieses Dokument legt Anforderungen an Ausführung, Sicherheit und Leistungsverhalten von Systemen zur enteralen Ernährung fest, die enterale Überleitungsgeräte, enterale Verlängerungssets, enterale Spritzen, Katheter zur enteralen Ernährung und Zubehör für enterale Anwendungen umfassen.
Dieses Dokument gilt nicht für Spritzen zur oralen Applikation.

Systèmes de nutrition entérale - Conception et essais (ISO 20695:2020)

Le présent document établit les exigences relatives aux systèmes de nutrition entérale, y compris les tubulures entérales, les prolongateurs pour nutrition entérale, les seringues entérales, les sondes de nutrition entérale et leurs accessoires.
Le présent document n'est pas applicable aux seringues orales.

Enteralni sistemi (katetri) za hranjenje - Oblikovanje in preskušanje (ISO 20695:2020)

General Information

Status
Published
Publication Date
07-Apr-2020
ICS
11.040.20 - Transfusion, infusion and injection equipment
11.040.25 - Syringes, needles an catheters
Technical Committee
CEN/TC 205 - Non-active medical devices
Drafting Committee
CEN/TC 205/WG 16 - Catheters
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Apr-2020
Due Date
27-Mar-2020
Completion Date
08-Apr-2020
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN ISO 20695:2020 - Enteral feeding systems - Design and testing (ISO 20695:2020)

Relations

Replaces
EN 1615:2000 - Enteral feeding catheters and enteral giving sets for single use and their connectors - Design and testing
Effective Date
15-Apr-2020
Replaces
EN 1618:1997 - Catheters other than intravascular catheters - Test methods for common properties
Effective Date
15-Apr-2020

Buy Standard

EN ISO 20695:2020EN ISO 20695:2020
PreviousNext
Standard
EN ISO 20695:2020
English language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20695:2020
01-junij-2020
Nadomešča:
SIST EN 1615:2001
SIST EN 1618:2000
Enteralni sistemi (katetri) za hranjenje - Oblikovanje in preskušanje (ISO
20695:2020)
Enteral feeding systems - Design and testing (ISO 20695:2020)
Systeme zur enteralen Ernährung - Ausführung und Prüfung (ISO 20695:2020)
Systèmes de nutrition entérale - Conception et essais (ISO 20695:2020)
Ta slovenski standard je istoveten z: EN ISO 20695:2020
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
SIST EN ISO 20695:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20695:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 20695:2020


EN ISO 20695
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 11.040.25 Supersedes EN 1615:2000, EN 1618:1997
English Version

Enteral feeding systems - Design and testing (ISO
20695:2020)
Systèmes de nutrition entérale - Conception et essais Systeme zur enteralen Ernährung - Ausführung und
(ISO 20695:2020) Prüfung (ISO 20695:2020)
This European Standard was approved by CEN on 29 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20695:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20695:2020
EN ISO 20695:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20695:2020
EN ISO 20695:2020 (E)
European foreword
This document (EN ISO 20695:2020) has been prepared by Technical Committee ISO/TC 84 "Devices
for administration of medicinal products and catheters" in collaboration with Technical Committee
CEN/TC 205 “Non-active medical devices” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1618:1997 and EN 1615:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20695:2020 has been approved by CEN as EN ISO 20695:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 20695:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 20695:2020
INTERNATIONAL ISO
STANDARD 20695
First edition
2020-03
Enteral feeding systems — Design
and testing
Cathéters de nutrition entérale — Conception et essais
Reference number
ISO 20695:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 20695:2020
ISO 20695:2020(E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7886-1:2018(Main)
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:2017, Corrected version 2019-08)
SIST EN ISO 7886-1:2018

ISO 7886-1:2017 specifies requirements and test methods for verifying the design of empty sterile single-use hypodermic syringes, with or without needle, made of plastic or other materials and intended for the aspiration and injection of fluids after filling by the end-users. This document does not provide requirements for lot release. The syringes are primarily for use in humans.
Sterile syringes specified in this document are intended for use immediately after filling and are not intended to contain the medicament for extended periods of time.
It excludes syringes for use with insulin (see ISO 8537), single-use syringes made of glass, syringes for use with power-driven syringe pumps, syringes pre-filled by the manufacturer, and syringes intended to be stored after filling (e.g. in a kit for filling by a pharmacist).
Hypodermic syringes without a needle specified in this document are intended for use with hypodermic needles specified in ISO 7864.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6009:2016(Main)
Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016)
SIST EN ISO 6009:2016

ISO 6009:2016 establishes a colour code for the identification of single-use hypodermic needles of designated metric sizein the range of 0,18 mm (34 Gauge) to 3,4 mm (10 Gauge) . It applies to regular-walled, thin-walled, extra-thin-walled and ultra-thin walled needles, and to opaque and translucent colours.
It is not applicable to pen-needles.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7864:2016(Main)
Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016)
SIST EN ISO 7864:2016

ISO 7864:2016 specifies requirements for sterile hypodermic needles for single use of designated metric sizes 0,18 mm to 1,2 mm.
It does not apply to those devices that are covered by their own standard such as dental needles and pen needles.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9626:2016(Main)
Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016)
SIST EN ISO 9626:2016

ISO 9626:2016 applies to rigid stainless steel needle tubing suitable for use in the manufacture of hypodermic needles and other medical devices primarily for human use.
It provides requirements and test methods for the tubes manufactured for needles as component used in medical devices. Additional performance testing on the tube aspect may be required when the component is incorporated in the ready-to-use device.
It specifies the dimensions and mechanical properties of steel tubing of designated metric sizes 3,4 mm (10 Gauge) to 0,18 mm (34 Gauge).
It does not apply to flexible stainless steel tubing because the mechanical properties differ from those specified for rigid tubing in ISO 9626:2016. However, manufacturers and purchasers of flexible tubing are encouraged to adopt the dimensional specifications given in ISO 9626:2016.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8537:2016(Main)
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016)
SIST EN ISO 8537:2016

ISO 8537:2016 specifies requirements and test methods for empty, sterile, single-use syringes, with or without needles, made of plastic materials and intended solely for the injection of insulin, with which the syringes are filled by the end user. This International Standard covers syringes intended for single-use only in humans and with insulins of various concentrations.
The insulin syringes specified in this International Standard are intended for use (i.e. insulin injection) immediately after filling and are not intended to contain insulin for extended periods of time.
ISO 8537:2016 excludes single-use syringes made of glass, syringes for use with power-driven syringe pumps, syringes that are pre-filled by the manufacturer, and syringes intended to be stored after filling (e.g. in a kit intended for filling by a pharmacist).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11070:2014(Main)
Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014)
SIST EN ISO 11070:2015

ISO 11070:2014 specifies requirements for introducer needles, introducer catheters, sheath introducers, guidewires, and dilators supplied in the sterile condition, and intended for single use in conjunction with intravascular catheters.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10555-3:2013(Main)
Intravascular catheters - Sterile and single-use catheters - Part 3: Central venous catheters (ISO 10555-3:2013)
SIST EN ISO 10555-3:2013

ISO 10555-3:2013 specifies requirements for central venous catheters supplied in the sterile condition, and intended for single use.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10555-5:2013(Main)
Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013)
SIST EN ISO 10555-5:2013

ISO 10555-5:2013 specifies requirements for over-needle peripheral intravascular catheters, intended for accessing the peripheral vascular system, supplied in the sterile condition and intended for single use.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-7:2010(Main)
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)
SIST EN ISO 8362-7:2011

ISO 8362-7:2006 specifies aluminium-plastics combinations for the injection caps of injection vials, as specified in ISO 8362-1 and ISO 8362-4, where the plastics part does not overlap the diameter of the vial body.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9997:2020(Main)
Dentistry - Cartridge syringes (ISO 9997:2020)
SIST EN ISO 9997:2020

This document specifies requirements and test methods for cartridge syringes used in dentistry. These syringes are of the non-aspirating, aspirating and self-aspirating types using cartridges with dental local anaesthetics.
This document is not applicable to cartridge syringes having a mechanical-advantage action for creating high pressure.
This document specifies requirements for cartridge syringes with ISO metric thread sizes. However, attention is drawn to the existence of a variety of syringes with imperial thread sizes (see Annex A).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day