EN ISO 8253-1:2010
(Main)Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
ISO 8253-1:2010 specifies procedures and requirements for pure-tone air conduction and bone conduction threshold audiometry. For screening purposes, only pure-tone air conduction audiometric test methods are specified. It is possible that the procedures are not appropriate for special populations, e.g. very young children.
ISO 8253-1:2010 does not cover audiometric procedures to be carried out at levels above the hearing threshold levels of the subjects.
Procedures and requirements for speech audiometry, electrophysiological audiometry, and where loudspeakers are used as a sound source are not specified.
Akustik - Audiometrische Prüfverfahren - Teil 1: Grundlegende Verfahren der Luft- und Knochenleitungs-Schwellenaudiometrie mit reinen Tönen (ISO 8253-1:2010)
Dieser Teil von ISO 8253 legt Verfahren und Anforderungen für Luft- und Knochenleitungs-Reinton-
Schwellenaudiometrie fest. Für audiometrische Screening-Tests werden nur Reinton-Luftleitungs-Verfahren
beschrieben. Die Verfahren sind möglicherweise für besondere Gruppen, z. B. sehr junge Kinder, nicht
geeignet.
Audiometrische Verfahren, die bei Pegeln über der Hörschwelle der Probanden durchgeführt werden, sind
nicht Gegenstand dieses Teils von ISO 8253.
Verfahren und Anforderungen für die Sprachaudiometrie, elektrophysiologische Audiometrie und Verfahren,
bei denen Lautsprecher als Schallquellen eingesetzt werden, werden nicht festgelegt.
Acoustique - Méthodes d'essais audiométriques - Partie 1: Audiométrie à sons purs en conduction aérienne et en conduction osseuse (ISO 8253-1:2010)
L'ISO 8253-1:2010 spécifie des modes opératoires et des exigences relatives à l'audiométrie liminaire à sons purs en conduction aérienne et en conduction osseuse. En ce qui concerne l'audiométrie de dépistage, seules sont décrites des méthodes audiométriques liminaires tonales en conduction aérienne. Il est possible que les modes opératoires ne conviennent pas à certaines populations, par exemple aux très jeunes enfants.
L'ISO 8253-1:2010 ne traite pas des méthodes audiométriques devant être exécutées à des niveaux dépassant les niveaux liminaires d'audition des sujets testés.
Les modes opératoires et les exigences relatifs à l'audiométrie vocale, à l'audiométrie électrophysiologique et à l'usage de haut-parleurs pour délivrer les sons ne sont pas spécifiés.
Akustika - Avdiometrijske preskusne metode - 1. del: Avdiometrija s čistimi toni za zračno in kostno prevodnost (ISO 8253-1:2010)
Ta del ISO 8253 opredeljuje postopke in zahteve za avdiometrijo s čistimi toni za zračno prevodnost in avdiometrijo pragovnih vrednosti za kostno prevodnost. Za presajanje so opredeljene le metode avdiometrije s čistimi zvoki za zračno prevodnost. Mogoče je, da ti postopki niso primerni za vse prebivalce, npr. zelo majhne otroke. Ta del ISO 8253 ne zajema postopkov avdiometrije, ki se izvajajo na ravneh nad slišnim pragom oseb. Postopki in zahteve za avdiometrijo govora, elektrofiziološko avdiometrijo in pri uporabi zvočnika kot vira hrupa niso opredeljeni.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8253-1:2011
01-marec-2011
1DGRPHãþD
SIST EN 26189:1999
SIST EN ISO 8253-1:1999
$NXVWLND$YGLRPHWULMVNHSUHVNXVQHPHWRGHGHO $YGLRPHWULMDVþLVWLPLWRQL]D
]UDþQRLQNRVWQRSUHYRGQRVW ,62
Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction
audiometry (ISO 8253-1:2010)
Akustik - Audiometrische Prüfverfahren - Teil 1: Grundlegende Verfahren der Luft- und
Knochenleitungs-Schwellenaudiometrie mit reinen Tönen (ISO 8253-1:2010)
Acoustique - Méthodes d'essais audiométriques - Partie 1: Audiométrie à sons purs en
conduction aérienne et en conduction osseuse (ISO 8253-1:2010)
Ta slovenski standard je istoveten z: EN ISO 8253-1:2010
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
SIST EN ISO 8253-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8253-1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 8253-1:2011
EUROPEAN STANDARD
EN ISO 8253-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 13.140 Supersedes EN 26189:1991, EN ISO 8253-1:1998
English Version
Acoustics - Audiometric test methods - Part 1: Pure-tone air and
bone conduction audiometry (ISO 8253-1:2010)
Acoustique - Méthodes d'essais audiométriques - Partie 1: Akustik - Audiometrische Prüfverfahren - Teil 1:
Audiométrie à sons purs en conduction aérienne et en Grundlegende Verfahren der Luft- und Knochenleitungs-
conduction osseuse (ISO 8253-1:2010) Schwellenaudiometrie mit reinen Tönen (ISO 8253-1:2010)
This European Standard was approved by CEN on 25 September 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8253-1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8253-1:2011
EN ISO 8253-1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8253-1:2011
EN ISO 8253-1:2010 (E)
Foreword
This document (EN ISO 8253-1:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in
collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 26189:1991 and EN ISO 8253-1:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8253-1:2010 has been approved by CEN as a EN ISO 8253-1:2010 without any modification.
3
---------------------- Page: 5 ------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.