Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)

ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting from such immersion. It does not cover environmental stress cracking (ESC) which is dealt with by the various parts of ISO 22088.
It only considers testing by immersion of the entire surface of the test specimen.
It is applicable to all solid plastics that are available in the form of moulding or extrusion materials, plates, tubes, rods or sheets having a thickness greater than 0,1 mm. It is not applicable to cellular materials.

Kunststoffe - Prüfverfahren zur Bestimmung des Verhaltens gegen flüssige Chemikalien (ISO 175:2010)

Diese Internationale Norm legt ein Verfahren zur Lagerung von Probekörpern aus Kunststoffen ohne
äußere Beanspruchungen in flüssigen Chemikalien fest sowie Verfahren zur Bestimmung der Änderungen
von Eigenschaften, die sich aus dieser Lagerung ergeben. Nicht erfasst wird die umweltbedingte
Spannungsrissbildung, die in den unterschiedlichen Teilen der ISO 22088 beschrieben wird.
1.2 Diese Norm berücksichtigt nur die Prüfung durch Eintauchen der gesamten Oberfläche des
Probekörpers.0F
1) 31H1F
ANMERKUNG Zur Veranschaulichung einer nur teilweisen oder selten auftretenden Feuchtigkeitseinwirkung auf
Kunststoffe ist dieses Verfahren möglicherweise ungeeignet.
1.3 Die vorliegende Norm ist auf alle festen Kunststoffe anwendbar, die aus Form- oder
Strangpressmaterialien bestehen oder in Form von Platten, Rohren, Stäben oder Folien vorliegen und dicker
als 0,1 mm sind. Auf Schaumstoffmaterialien ist sie nicht anwendbar.

Plastiques - Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides (ISO 175:2010)

L'ISO 175:2010 spécifie une méthode d'exposition d'éprouvettes en plastique exemptes de toute contrainte extérieure à des produits chimiques liquides, ainsi que des méthodes de détermination des variations des caractéristiques résultant d'une telle exposition. Elle ne concerne pas la fissuration sous contrainte dans un environnement donné (ESC) qui est traitée dans les différentes parties de l'ISO 22088.
Elle n'envisage que l'essai par immersion sur toute la surface de l'éprouvette.
Elle est applicable à tous les plastiques compacts se présentant sous forme de matières à mouler ou à extruder, de plaques, tubes, joncs ou feuilles ayant une épaisseur supérieure à 0,1 mm. Elle n'est pas applicable aux matériaux alvéolaires.

Polimerni materiali - Preskusne metode za ugotavljanje učinkov pri potapljanju v tekoče kemikalije (ISO 175:2010)

Ta mednarodni standard določa metodo izpostavljanja preskusnih vzorcev polimernih materialov brez zunanjih omejitev tekočim kemikalijam in metode za določevanje sprememb v lastnostih zaradi takega potapljanja. Ne zajema razpokanja zaradi okoljskih vplivov (ESC), ki ga obravnavajo različni deli ISO 22088. Obravnava le preskušanje s potapljanjem celotne površine preskušanca.

General Information

Status
Published
Publication Date
14-Oct-2010
Withdrawal Date
29-Apr-2011
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Oct-2010
Completion Date
15-Oct-2010

Relations

Buy Standard

Standard
EN ISO 175:2011
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 175:2010
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 175:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 175:2000
3ROLPHUQLPDWHULDOL3UHVNXVQHPHWRGH]DXJRWDYOMDQMHXþLQNRYSULSRWDSOMDQMXY
WHNRþHNHPLNDOLMH ,62
Plastics - Methods of test for the determination of the effects of immersion in liquid
chemicals (ISO 175:2010)
Kunststoffe - Prüfverfahren zur Bestimmung des Verhaltens gegen flüssige Chemikalien
(ISO 175:2010)
Plastiques - Méthodes d'essai pour la détermination des effets de l'immersion dans des
produits chimiques liquides (ISO 175:2010)
Ta slovenski standard je istoveten z: EN ISO 175:2010
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 175:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 175:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 175:2011


EUROPEAN STANDARD
EN ISO 175

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2010
ICS 83.080.01 Supersedes EN ISO 175:2000
English Version
Plastics - Methods of test for the determination of the effects of
immersion in liquid chemicals (ISO 175:2010)
Plastiques - Méthodes d'essai pour la détermination des Kunststoffe - Prüfverfahren zur Bestimmung des Verhaltens
effets de l'immersion dans des produits chimiques liquides gegen flüssige Chemikalien (ISO 175:2010)
(ISO 175:2010)
This European Standard was approved by CEN on 14 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 175:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 175:2011
EN ISO 175:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 175:2011
EN ISO 175:2010 (E)
Foreword
This document (EN ISO 175:2010) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 175:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 175:2010 has been approved by CEN as a EN ISO 175:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 175:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 175:2011

INTERNATIONAL ISO
STANDARD 175
Third edition
2010-10-15

Plastics — Methods of test for the
determination of the effects of immersion
in liquid chemicals
Plastiques — Méthodes d'essai pour la détermination des effets de
l'immersion dans des
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Prüfverfahren zur Bestimmung des Verhaltens gegen flüssige Chemikalien (ISO/FDIS 175:2010)Plastiques - Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides (ISO/FDIS 175:2010)Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO/FDIS 175:2010)83.080.01Polimerni materiali na splošnoPlastics in generalICS:Ta slovenski standard je istoveten z:FprEN ISO 175kSIST FprEN ISO 175:2010en,fr01-september-2010kSIST FprEN ISO 175:2010SLOVENSKI
STANDARD



kSIST FprEN ISO 175:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 175
June 2010 ICS 83.080.01 Will supersede EN ISO 175:2000English Version
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO/FDIS 175:2010)
Plastiques - Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides (ISO/FDIS 175:2010)
Kunststoffe -Prüfverfahren zur Bestimmung des Verhaltens gegen flüssige Chemikalien (ISO/FDIS 175:2010) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 175:2010: EkSIST FprEN ISO 175:2010



FprEN ISO 175:2010 (E) 2 Contents Page Foreword .3 kSIST FprEN ISO 175:2010



FprEN ISO 175:2010 (E) 3 Foreword This document (FprEN ISO 175:2010) has been prepared by Technical Committee ISO/TC 61 "Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN ISO 175:2000. Endorsement notice The text of ISO/FDIS 175:2010 has been approved by CEN as a FprEN ISO 175:2010 without any modification.
kSIST FprEN ISO 175:2010



kSIST FprEN ISO 175:2010



Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TOSUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICHTHEY ARE AWARE AND TO PROVIDE SUPPORT-ING DOCUMENTATION. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-LOGICAL, COMMERCIAL AND USER PURPOSES,DRAFT INTERNATIONAL STANDARDS MAY ONOCCASION HAVE TO BE CONSIDERED IN THELIGHT OF THEIR POTENTIAL TO BECOME STAN-DARDS TO WHICH REFERENCE MAY BE MADE INNATIONAL REGULATIONS.
Reference numberISO/FDIS 175:2010(E)© ISO 2010 FINAL DRAFT ISO/TC 61/SC 6 Secretariat: DIN Voting begins on: 2010-06-24 Voting terminates on: 2010-08-24
INTERNATIONAL STANDARD ISO/FDIS175Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals Plastiques — Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides
kSIST FprEN ISO 175:2010



ISO/FDIS 175:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.