Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018)

This part of ISO 22391 gives guidance for the assessment of conformity of materials, products, and assemblies in accordance with the applicable part(s) of ISO 22391 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
In conjunction with the other parts of ISO 22391 (see Foreword), this Technical Specification is applicable to polyethylene of raised temperature resistance (PE-RT) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 22391:2009).

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für die Beurteilung der Konformität (ISO/TS 22391-7:2018)

Dieses Dokument enthält Anforderungen und Empfehlungen für die Beurteilung der Konformität von Werkstoffen, Produkten und Bauteilkombinationen, die, in Übereinstimmung mit den/dem entsprechenden Teil(en) von ISO 22391, als Teil des Qualitätsmanagementsystems im Qualitätssicherungsplan des Herstellers und für die Erstellung von Zertifizierungsverfahren vorgesehen sind.
ANMERKUNG   Als Hilfe für den Leser enthält Anhang A eine grundlegende Prüfmatrix.
Zusammen mit den übrigen Teilen von ISO 22391 (siehe Vorwort) gilt dieses Dokument für Rohrleitungs-systeme aus Polyethylen erhöhter Temperaturbeständigkeit (PE RT), die in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für die Durchleitung von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen unter Berücksichtigung des betreffenden Systembetriebsdruckes und der für die jeweilige Anwendungsklasse geltenden Temperaturen (siehe ISO 22391 1:2009, Tabelle 1) eingesetzt werden.

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 7: Guide pour l'évaluation de la conformité (ISO/TS 22391-7:2018)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polietilen s povišano temperaturno odpornostjo (PE-RT) - 7. del: Navodilo za ugotavljanje skladnosti (ISO/TS 22391-7:2018)

Ta del standarda ISO 22391 vsebuje navodila za ugotavljanje skladnosti materialov, izdelkov in sestavov z ustreznimi deli standarda ISO 22391, ki naj bi se vključila v poslovnik kakovosti proizvajalca kot del sistema vodenja kakovosti, vsebuje pa tudi navodila za vzpostavitev postopka certificiranja.  Ta tehnična specifikacija se v povezavi z drugimi deli standarda ISO 22391 (glej predgovor) uporablja za cevne sisteme iz polietilena s povišano temperaturno odpornostjo (PE-RT), ki se uporabljajo za napeljave z vročo in hladno vodo za prenos pitne in nepitne vode v stavbah (gospodinjski sistemi), ter za sisteme ogrevanja glede na predvidene tlake in temperature, ki ustrezajo razredu uporabe (glej tabelo 1 v standardu ISO 22391:2009).

General Information

Status
Published
Publication Date
18-Dec-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Dec-2018
Due Date
08-Jan-2019
Completion Date
19-Dec-2018

Relations

Buy Standard

Technical specification
TS CEN ISO/TS 22391-7:2019 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN ISO/TS 22391-7:2018 - BARVE
German language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 22391-7:2019
01-marec-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 22391-7:2012
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLHWLOHQVSRYLãDQRWHPSHUDWXUQRRGSRUQRVWMR 3(57 GHO1DYRGLOR]D
XJRWDYOMDQMHVNODGQRVWL ,6276
Plastics piping systems for hot and cold water installations - Polyethylene of raised
temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity
(ISO/TS 22391-7:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen
erhöhter Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für die Beurteilung
der Konformität (ISO/TS 22391-7:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 7: Guide pour
l'évaluation de la conformité (ISO/TS 22391-7:2018)
Ta slovenski standard je istoveten z: CEN ISO/TS 22391-7:2018
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST-TS CEN ISO/TS 22391-7:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 22391-7:2019

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 22391-7:2019


CEN ISO/TS 22391-7
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

December 2018
TECHNISCHE SPEZIFIKATION
ICS 23.040.01; 91.140.60; 93.025 Supersedes CEN ISO/TS 22391-7:2011
English Version

Plastics piping systems for hot and cold water installations
- Polyethylene of raised temperature resistance (PE-RT) -
Part 7: Guidance for the assessment of conformity (ISO/TS
22391-7:2018)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polyéthylène de Kaltwasserinstallation - Polyethylen erhöhter
meilleure résistance à la température (PE-RT) - Partie Temperaturbeständigkeit (PE-RT) - Teil 7:
7: Guide pour l'évaluation de la conformité (ISO/TS Empfehlungen für die Beurteilung der Konformität
22391-7:2018) (ISO/TS 22391-7:2018)
This Technical Specification (CEN/TS) was approved by CEN on 26 October 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 22391-7:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 22391-7:2019
CEN ISO/TS 22391-7:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 22391-7:2019
CEN ISO/TS 22391-7:2018 (E)
European foreword
This document (CEN ISO/TS 22391-7:2018) has been prepared by Technical Committee ISO/TC 138
"Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical Committee
CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 22391-7:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denm
...

SLOVENSKI STANDARD
kSIST-TS FprCEN ISO/TS 22391-7:2018
01-oktober-2018
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLHWLOHQVSRYLãDQRWHPSHUDWXUQRRGSRUQRVWMR 3(57 GHO1DYRGLOR]D
XJRWDYOMDQMHVNODGQRVWL ,6235)76
Plastics piping systems for hot and cold water installations - Polyethylene of raised
temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity
(ISO/PRF TS 22391-7:2018)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen
erhöhter Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für die Beurteilung
der Konformität (ISO/PRF TS 22391-7:2018)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide --
Polyéthylène de meilleure résistance à la température (PE-RT) -- Partie 7: Guide pour
l'évaluation de la conformité (ISO/PRF TS 22391-7:2018)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 22391-7
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
kSIST-TS FprCEN ISO/TS 22391-7:2018 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN ISO/TS 22391-7:2018

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN ISO/TS 22391-7:2018


SCHLUSS-ENTWURF
TECHNISCHE SPEZIFIKATION
FprCEN ISO/TS 22391-7
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

Juli 2018
ICS Vorgesehen als Ersatz für CEN ISO/TS 22391-7:2011
Deutsche Fassung

Kunststoff-Rohrleitungssysteme für die Warm- und
Kaltwasserinstallation - Polyethylen erhöhter
Temperaturbeständigkeit (PE-RT) - Teil 7: Empfehlungen für
die Beurteilung der Konformität (ISO/PRF TS 22391-7:2018)
Plastics piping systems for hot and cold water Systèmes de canalisations en plastique pour les
installations - Polyethylene of raised temperature installations d'eau chaude et froide -- Polyéthylène de
resistance (PE-RT) - Part 7: Guidance for the meilleure résistance à la température (PE-RT) -- Partie
assessment of conformity (ISO/PRF TS 22391-7:2018) 7: Guide pour l'évaluation de la conformité (ISO/PRF TS
22391-7:2018)


Dieser Technische Spezifikation-Entwurf wird den CEN-Mitgliedern zur Abstimmung vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 155 erstellt.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Technischen Spezifikation. Es wird zur Prüfung und
Stellungnahme vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Technischen Spezifikation in Bezug
genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2018 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. FprCEN ISO/TS 22391-7:2018 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN ISO/TS 22391-7:2018
FprCEN ISO/TS 22391-7:2018 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
Einleitung . 5
1 Anwendungsbereich . 7
2 Normative Verweisungen . 7
3 Begriffe . 7
4 Abkürzungen .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.