Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)

ISO 14123-1:2015 establishes principles for the control of risks to health resulting from hazardous substances emitted by machinery.
ISO 14123-1:2015 is not applicable to substances that are a hazard to health solely because of their explosive, flammable or radioactive properties or their behaviour at extremes of temperature or pressure.

Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf Gefahrstoffemissionen von Maschinen zurückzuführen sind - Teil 1: Grundsätze und Festlegungen für Maschinenhersteller (ISO 14123-1:2015)

Dieser Teil von ISO 14123 stellt Grundsätze auf für die Überwachung von Gesundheitsrisiken, die auf Gefahrstoffemissionen von Maschinen zurückzuführen sind.
Dieser Teil von ISO 14123 gilt nicht für Gefahrstoffe, die ausschließlich aufgrund von explosiven, entzündlichen oder radioaktiven Eigenschaften oder deren Verhalten bei Temperatur- oder Druckextremen eine Gesundheitsgefährdung darstellen.

Sécurité des machines - Réduction des risques pour la santé résultant de substances dangereuses émises par des machines - Partie 1: Principes et spécifications à l'intention des constructeurs de machines (ISO 14123-1:2015)

ISO 14123-1:2015 établit des principes de maîtrise des risques pour la santé résultant des substances dangereuses émises par des machines.
ISO 14123-1:2015 ne couvre pas les substances constituant un danger pour la santé du seul fait de leur caractère explosif, inflammable, radioactif ou de leurs conditions de température (haute ou basse) ou de pression (haute ou basse).

Varnost strojev - Zmanjšanje zdravstvenega tveganja zaradi nevarnih snovi, ki jih oddajajo stroji - 1. del: Načela in specifikacije za proizvajalce strojev (ISO 14123-1:2015)

Ta evropski standard opisuje načela za obvladovanje zdravstvenih tveganj zaradi nevarnih snovi iz strojev. Ta evropski standard se ne uporablja za snovi, ki so zdravju nevarne izključno zaradi svoje eksplozivnosti, vnetljivosti ali radioaktivnosti oziroma njihovega obnašanja pri skrajni temperaturi ali tlaku.

General Information

Status
Published
Publication Date
10-Nov-2015
Withdrawal Date
30-May-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Nov-2015
Completion Date
11-Nov-2015

Relations

Buy Standard

Standard
EN ISO 14123-1:2016
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 14123-1:2015
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14123-1:2016
01-februar-2016
1DGRPHãþD
SIST EN 626-1:1995+A1:2008
9DUQRVWVWURMHY=PDQMãDQMH]GUDYVWYHQHJDWYHJDQMD]DUDGLQHYDUQLKVQRYLNLMLK
RGGDMDMRVWURMLGHO1DþHODLQVSHFLILNDFLMH]DSURL]YDMDOFHVWURMHY ,62

Safety of machinery - Reduction of risks to health resulting from hazardous substances
emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
(ISO 14123-1:2015)
Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf
Gefahrstoffemissionen von Maschinen zurückzuführen sind - Teil 1: Grundsätze und
Festlegungen für Maschinenhersteller (ISO 14123-1:2015)
Sécurité des machines - Réduction des risques pour la santé résultant de substances
dangereuses émises par des machines - Partie 1: Principes et spécifications à l'intention
des constructeurs de machines (ISO 14123-1:2015)
Ta slovenski standard je istoveten z: EN ISO 14123-1:2015
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
13.110 Varnost strojev Safety of machinery
SIST EN ISO 14123-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14123-1:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 14123-1:2016


EN ISO 14123-1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 13.110 Supersedes EN 626-1:1994+A1:2008
English Version

Safety of machinery - Reduction of risks to health resulting
from hazardous substances emitted by machinery - Part 1:
Principles and specifications for machinery manufacturers
(ISO 14123-1:2015)
Sécurité des machines - Réduction des risques pour la Sicherheit von Maschinen - Minderung von
santé résultant de substances dangereuses émises par Gesundheitsrisiken, die auf Gefahrstoffemissionen von
des machines - Partie 1: Principes et spécifications à Maschinen zurückzuführen sind - Teil 1: Grundsätze
l'intention des constructeurs de machines (ISO 14123- und Festlegungen für Maschinenhersteller (ISO 14123-
1:2015) 1:2015)
This European Standard was approved by CEN on 10 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14123-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14123-1:2016
EN ISO 14123-1:2015 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14123-1:2016
EN ISO 14123-1:2015 (E)
European foreword
This document (EN ISO 14123-1:2015) has been prepared by Technical Committee ISO/TC 199 "Safety
of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
...

SLOVENSKI STANDARD
kSIST FprEN ISO 14123-1:2015
01-oktober-2015
9DUQRVWVWURMHY=PDQMãDQMH]GUDYVWYHQHJDWYHJDQMD]DUDGLQHYDUQLKVQRYLNLMLK
RGGDMDMRVWURMGHO1DþHODLQVSHFLILNDFLMH]DSURL]YDMDOFHVWURMHY ,62)',6

Safety of machinery - Reduction of risks to health resulting from hazardous substances
emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
(ISO/FDIS 14123-1:2015)
Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf
Gefahrstoffemissionen von Maschinen zurückzuführen sind - Teil 1: Grundsätze und
Festlegungen für Maschinenhersteller (ISO/FDIS 14123-1:2015)
Sécurité des machines - Réduction des risques pour la santé résultant de substances
dangereuses émises par des machines - Partie 1: Principes et spécifications à l'intention
des constructeurs de machines (ISO/FDIS 14123-1:2015)
Ta slovenski standard je istoveten z: FprEN ISO 14123-1
ICS:
13.110 Varnost strojev Safety of machinery
kSIST FprEN ISO 14123-1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 14123-1:2015

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 14123-1:2015
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 14123-1
ISO/TC 199
Safety of machinery — Reduction of
Secretariat: DIN
risks to health resulting from hazardous
Voting begins
on: 2015-07-09 substances emitted by machinery —
Voting terminates
Part 1:
on: 2015-09-09
Principles and specifications for
machinery manufacturers
Sécurité des machines — Réduction des risques pour la santé
résultant de substances dangereuses émises par des machines —
Partie 1: Principes et spécifications à l’intention des constructeurs de
machines
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 14123-1:2015(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2015

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 14123-1:2015
ISO/FDIS 14123-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 14123-1:2015
ISO/FDIS 14123-1:2015(E)

ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the International Organization for Standardization (ISO), and pro-
cessed under the ISO-lead mode of collaboration as defined in the Vienna Agreement. The final draft was
established on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
two-month approval vote in ISO and formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
© ISO 2015 – All rights reserved iii

---------------------- Page: 5 ----------------------
kSIST FprEN ISO 14123-1:2015
ISO/FDIS 14123-1:2015(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.