Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016)

ISO 8033:2016 specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of material inside the lining to reduce permeation of fluid into the lining). It covers all bore sizes and the following types of hose construction:
-      woven textile fabric;
-      braided textile fabric;
-      knitted textile fabric;
-      circular-woven textile fabric;
-      textile spiral;
-      textile cord;
-      wire braid;
-      wire spiral;
-      hoses containing a supporting helix.
Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service.

Gummi- und Kunststoffschläuche - Bestimmung der Haftung zwischen den einzelnen Schichten (ISO 8033:2016)

Diese Internationale Norm legt Verfahren für die Bestimmung der Haftfestigkeit zwischen Innenschicht und Einlagen, Außenschicht und Einlagen, zwischen den Einlagen, zwischen Außenschicht und äußerer Laminierung (dünne Materiallagen, die die Außenschicht schützen) und zwischen Innenschicht und innerer Laminierung (dünne Materiallagen innerhalb der Innenschicht, die die Durchlässigkeit von Flüssigkeit in die Innenschicht verringern) fest. Sie umfasst alle Nennweiten und die folgenden Schlauchkonstruktionen:
—   Textilgewebe;
—   Textilgeflecht;
—   Textil, gestrickt;
—   Textil, endlos gewebt;
—   Textil, spiralgedreht;
—   Textilcord;
—   Drahtgeflecht;
—   Drahtspirale;
—   Schläuche mit Verstärkungsspirale.
Eine ausreichende Haftfestigkeit zwischen den verschiedenen Schichten eines Schlauchs ist ausschlaggebend für den zufriedenstellenden Einsatz im Betrieb.

Tuyaux en caoutchouc et en plastique - Détermination de l'adhérence entre éléments (ISO 8033:2016)

ISO 8033:2016 spécifie des méthodes pour la détermination de l'adhérence entre le tube intérieur et le renforcement, entre le revêtement et le renforcement, entre les couches de renforcement, entre le revêtement et la couche externe (fine couche de matériau à l'extérieur du revêtement, pour la protection) et entre le tube intérieur et la couche interne (fine couche de matériau à l'intérieur du tube, pour réduire la perméation du fluide dans le tube). Elle couvre tous les diamètres et les types suivants de confection de tuyaux:
-      plis de tissu;
-      fils textiles tressés;
-      fils textiles tricotés;
-      fils textiles tissés sur métier circulaire;
-      fils textiles guipés
-      nappes de fils textiles;
-      fils métalliques tressés;
-      fils métalliques guipés;
-      tuyaux contenant une hélice support.
Une adhérence adéquate entre les différents éléments d'un tuyau est essentielle pour obtenir des performances satisfaisantes en service.

Gumene in polimerne cevi - Ugotavljanje adhezije med komponentami (ISO 8033:2016)

Ta dokument določa metode za ugotavljanje adhezije med oblogo in
ojačitvijo, med zaščitnim slojem in ojačitvijo, med plastmi ojačitve, med zaščitnim slojem in
zunanjo laminacijo (tanka plast materiala na zunanji strani zaščitnega sloja) ter med oblogo in notranjo
laminacijo (tanka plast materiala na notranji strani obloge za zmanjšanje prepustnosti tekočine v oblogo). Zajema
vse velikosti premerov in naslednje vrste cevnih sestavov:
– ploskovna tekstilija;
– tekstilni oplet;
– tekstilna tkanina;
– krožna ploskovna tekstilija;
– tekstilna spirala;
– tekstilna vrv;
– pramen;
– spiralna žica;
– cevi s podporno spiralo.
Ustrezna adhezija med različnimi komponentami cevi je bistvenega pomena za zadovoljivo
delovanje.

General Information

Status
Published
Publication Date
17-Jan-2017
Withdrawal Date
30-Jul-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Jan-2017
Completion Date
18-Jan-2017

Relations

Buy Standard

Standard
EN ISO 8033:2017
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 8033:2015
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8033:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 8033:2006
Gumene in polimerne cevi - Ugotavljanje adhezije med komponentami (ISO
8033:2016)
Rubber and plastics hoses - Determination of adhesion between components (ISO
8033:2016)
Gummi- und Kunststoffschläuche - Bestimmung der Haftung zwischen den einzelnen
Schichten (ISO 8033:2016)
Tuyaux en caoutchouc et en plastique - Détermination de l'adhérence entre éléments
(ISO 8033:2016)
Ta slovenski standard je istoveten z: EN ISO 8033:2017
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 8033:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8033:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 8033:2017


EN ISO 8033
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2017
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 8033:2006
English Version

Rubber and plastics hoses - Determination of adhesion
between components (ISO 8033:2016)
Tuyaux en caoutchouc et en plastique - Détermination Gummi- und Kunststoffschläuche - Bestimmung der
de l'adhérence entre éléments (ISO 8033:2016) Haftung zwischen den einzelnen Schichten (ISO
8033:2016)
This European Standard was approved by CEN on 24 September 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8033:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8033:2017
EN ISO 8033:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 8033:2017
EN ISO 8033:2017 (E)
European foreword
This document (EN ISO 8033:2017) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be
withdrawn at the latest by July 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 8033:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8033:2016 has been approved by CEN as EN ISO 8033:2017 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 8033:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 8033:2017
INTERNATIONAL ISO
STANDARD 8033
Fourth edition
2016-12-15
Rubber and plastics hoses —
Determination of adhesion between
components
Tuyaux en caoutchouc et en plastique — Détermin
...

SLOVENSKI STANDARD
oSIST prEN ISO 8033:2015
01-september-2015
Gumene in polimerne cevi - Ugotavljanje adhezije med komponentami (ISO/DIS
8033:2015)
Rubber and plastics hoses - Determination of adhesion between components (ISO/DIS
8033:2015)
Gummi- und Kunststoffschläuche - Bestimmung der Haftung zwischen den einzelnen
Schichten (ISO/DIS 8033:2015)
Tuyaux en caoutchouc et en plastique - Détermination de l'adhérence entre éléments
(ISO/DIS 8033:2015)
Ta slovenski standard je istoveten z: prEN ISO 8033
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
oSIST prEN ISO 8033:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8033:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8033:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8033
ISO/TC 45/SC 1 Secretariat: DSM
Voting begins on: Voting terminates on:
2015-07-02 2015-10-02
Rubber and plastics hoses — Determination of adhesion
between components
Tuyaux en caoutchouc et en plastique — Détermination de l’adhérence entre éléments
ICS: 23.040.70
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8033:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8033:2015
ISO/DIS 8033:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8033:2015
ISO/DIS 8033:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
4.1 Test machine . 2
4.2 Grips .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.