Railway applications - Energy measurement on board trains - Part 1: General

This European Standard describes the primary purpose of the EMS, which is to meter energy consumption for billing and provide compiled energy billing data (CEBD) to a DCS. The EMS may also be used for other functions such as energy management. In addition, this European Standard also describes the primary purpose of a DCS and its interactions with an EMS and settlement system. This part of EN 50463: - gives requirements for the complete Energy Measurement System and also requirements for all devices implementing one or more functions of the Energy Measurement System; - applies to newly manufactured Energy Measurement Systems for use on board railway traction units, powered by AC. and/or DC. supply voltages as listed in EN 50163; - does not apply to portable Energy Measurement Systems.

Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 1: Allgemeines

Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 1 : Généralités

La présente Norme européenne décrit l'objectif principal de l'EMS, qui consiste à mesurer la consommation d'énergie à des fins de facturation et à fournir des données de facturation d'énergie compilées (CEBD) à un DCS. L'EMS peut également être utilisé pour d'autres fonctions telles que la gestion de l'énergie. De surcroît, la présente Norme européenne décrit l'objectif principal d'un DCS ainsi que ses interactions avec un EMS et un système de règlement. La présente partie de l'EN 50463 : - définit les exigences pour le système de mesure d'énergie complet, ainsi que les exigences pour tous les dispositifs mettant en oeuvre une ou plusieurs fonctions du système de mesure d'énergie ; - s'applique aux systèmes de mesure d'énergie nouvellement fabriqués pour l'utilisation à bord d'unités de traction ferroviaires alimentées par des tensions d'alimentation en courant alternatif et/ou en courant continu comme indiqué dans l'EN 50163 ; - ne s'applique pas aux systèmes de mesure d'énergie portables.

Železniške naprave - Merjenje energije na vlaku - 1. del: Splošno

Ta osnutek evropskega standarda opisuje primarni namen sistema EMS, ki je merjenje porabe energije za obračunavanje in ponujanje zbranih podatkov o obračunavanju energije (CEBD) DCS-ju. Sistem EMS se lahko uporablja tudi za druge namene, npr. upravljanje energije. Poleg tega ta osnutek evropskega standarda opisuje tudi primarni namen DCS-ja in njegovih interakcij s sistemom upravljanja z energijo (EMS) in poravnalnim sistemom.
Ta del standarda EN 50463:
– določa zahteve za celoten sistem merjenja energije in tudi zahteve za vse naprave, ki opravljajo eno ali več funkcij sistema merjenja energije;
– se uporablja za na novo proizvedene sisteme merjenja energije za uporabo na vlakih, ki se napajajo z izmenično in/ali enosmerno napajalno napetostjo, kot je navedeno v standardu EN 50163;
– se ne uporablja za prenosne sisteme merjenja energije.

General Information

Status
Published
Publication Date
05-Oct-2017
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
20-Apr-2022

Relations

Buy Standard

Standard
EN 50463-1:2018
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50463-1:2016
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Merjenje energije na vlaku - 1. del: SplošnoBahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 1: AllgemeinesApplications ferroviaires - Mesure d'énergie à bord des trains - Partie 1: GénéralitésRailway applications - Energy measurement on board trains - Part 1: General45.060.10Tractive stockICS:Ta slovenski standard je istoveten z:EN 50463-1:2017SIST EN 50463-1:2018en01-januar-2018SIST EN 50463-1:2018SLOVENSKI
STANDARDSIST EN 50463-1:20131DGRPHãþD



SIST EN 50463-1:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50463-1
October 2017 ICS 45.060.10
Supersedes
EN 50463-1:2012English Version
Railway applications - Energy measurement on board trains - Part 1: General
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 1 : Généralités
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 1: Allgemeines This European Standard was approved by CENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50463-1:2017 ESIST EN 50463-1:2018



EN 50463-1:2017 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviations . 9 3.1 Terms and definitions . 9 3.2 Abbreviations . 12 4 Requirements . 13 4.1 General . 13 4.2 System level requirements . 13 4.2.1 General . 13 4.2.2 Accuracy . 13 4.2.3 EMS operation and power supply . 13 4.2.4 EMS measuring input . 14 4.2.5 Data handling . 14 4.2.6 RAMS . 15 4.3 Device level requirements .
...

SLOVENSKI STANDARD
oSIST prEN 50463-1:2016
01-februar-2016
Železniške naprave - Merjenje energije na vlaku - 1. del: Splošno
Railway applications - Energy measurement on board trains - Part 1: General
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 1: Allgemeines
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 1: Généralités
Ta slovenski standard je istoveten z: prEN 50463-1:2015
ICS:
45.060.10 9OHþQDYR]LOD Tractive stock
oSIST prEN 50463-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50463-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN 50463-1:2016

EUROPEAN STANDARD DRAFT
prEN 50463-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2015
ICS 45.060.10 Will supersede EN 50463-1:2012
English Version
Railway applications - Energy measurement on board trains -
Part 1: General
Applications ferroviaires - Mesure d'énergie à bord des Bahnanwendungen - Energiemessung auf Bahnfahrzeugen
trains - Partie 1: Généralités - Teil 1: Allgemeines
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2016-02-19.

It has been drawn up by CLC/TC 9X.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 60926 Ref. No. prEN 50463-1:2015 E

---------------------- Page: 3 ----------------------
oSIST prEN 50463-1:2016
prEN 50463-1:2015
32 Contents
33 European foreword . 3
34 Introduction . 4
35 1 Scope . 7
36 2 Normative references . 7
37 3 Terms, definitions and abbreviations . 8
38 4 Requirements . 11
39 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives . 22
40 Bibliography . 23
41
42 Figure
43 Figure 1 — EMS functional structure and dataflow diagram . 6
44
2

---------------------- Page: 4 ----------------------
oSIST prEN 50463-1:2016
prEN 50463-1:2015
45 European foreword
46 This document (prEN 50463-1:2015) has been prepared by CLC/TC 9X “Electrical and electronic
47 applications for railways”.
48 This document is currently submitted to the Enquiry.
49 The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced at national
level
• l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.