EN 60469:2013
(Main)Transitions, pulses and related waveforms - Terms, definitions and algorithms
Transitions, pulses and related waveforms - Terms, definitions and algorithms
IEC 60469:2013 provides definitions of terms pertaining to transitions, pulses, and related waveforms and provides definitions and descriptions of techniques and procedures for measuring their parameters. The waveforms considered in this standard are those that make a number of transitions and that remain relatively constant in the time intervals between transitions. Signals and their waveforms for which this standard apply include but are not limited to those used in: - digital communications, data communications, and computing; - studies of transient biological, cosmological, and physical events; - and electrical, chemical, and thermal pulses encountered and used in a variety of industrial, commercial, and consumer applications. This standard does not apply to sinusoidally-varying or other continuously-varying signals and their waveforms. The object of this standard is to facilitate accurate and precise communication concerning parameters of transitions, pulses, and related waveforms and the techniques and procedures for measuring them. IEC 60469:2013 combine the contents of IEC 60469-1 and IEC 60469-2. IEC 60469-1 dealt with terms and definitions for describing waveform parameters and IEC 60469-2 described the waveform measurement process. Other technical revisions include updating of terminology, errors correction, algorithms addition for computing values of pulse parameters, and addition of a newly-developed method for computing state levels. Changes to the definitions include adding new terms and definitions, deleting unused terms and definitions, expanding the list of deprecated terms, and updating and modifying existing definitions.
Übergänge, Impulse und zugehörige Schwingungsabbilder – Begriffe, Definitionen und Algorithmen
Transitions, impulsions et formes d'ondes associées - Termes, définitions et algorithmes
La CEI 60469:2013 définit des termes relatifs aux transitions, impulsions et formes d'ondes associées, puis définit et décrit plusieurs techniques et procédures de mesure des paramètres correspondants. Les formes d'ondes abordées dans la présente norme sont celles qui présentent un certain nombre de transitions et restent relativement constantes dans l'intervalle de temps séparant les transitions. Les signaux et formes d'ondes associées auxquels la présente norme s'applique comprennent, sans s'y limiter, ceux utilisés dans: - les communications numériques, les communications de données et l'informatique; - l'étude des événements biologiques, cosmologiques et physiques transitoires; - ainsi que les impulsions électriques, chimiques et thermiques rencontrées et utilisées dans diverses applications industrielles, commerciales et grand public. La présente norme ne concerne pas les signaux à variation sinusoïdale et autres signaux à variation continue, ni leurs formes d'ondes associées. La présente norme a pour objet, d'une part, de faciliter une communication précise et claire quant aux paramètres des transitions, des impulsions et des formes d'ondes associées, d'autre part, de définir les techniques et procédures permettant de les mesurer. La CEI 60469:2013 vise à combiner le contenu des normes CEI 60469-1 et CEI 60469-2. La CEI 60469-1 traitait des termes et définitions visant à décrire les paramètres de forme d'onde, et la CEI 60469-2 décrivait le procédé de mesure des formes d'ondes. D'autres mises à jour techniques incluent l'actualisation de la terminologie, la correction d'erreurs, l'ajout des algorithmes de calcul des valeurs de paramètres d'impulsion et l'introduction d'une nouvelle méthode de calcul des niveaux d'état. Les modifications apportées aux définitions comprennent l'ajout de nouveaux termes et définitions, la suppression de termes et définitions inutilisés, l'extension de la liste des termes déconseillés, de même que l'actualisation et la modification des définitions existantes.
Prehodi, impulzi in z njimi povezane valovne oblike - Izrazi, definicije in algoritmi (IEC 60469:2013)
Ta mednarodni standard podaja opredelitve izrazov s področja prehodov, impulzov in z njimi povezanih valovnih oblik, ter podaja opredelitve in opise tehnik ter postopkov za merjenje njihovih parametrov. Valovne oblike, vključene v ta standard, so tiste, ki ustvarijo več prehodov in ostanejo v časovnih intervalih med prehodi relativno stanovitne. Signali in njihove valovne oblike, za katere velja ta standard, med drugim vključujejo tiste, ki se uporabljajo na področju: digitalnih komunikacij, podatkovnih komunikacij in računalništva; študij prehodnih bioloških, kozmoloških in fizičnih dogodkov; ter električnih, kemijskih in toplotnih impulzov, ki nastajajo in se uporabljajo za različne industrijske, komercialne in potrošniške uporabe. Ta standard se ne uporablja za sinusno različne ali druge nenehno spreminjajoče se signale in njihove valovne oblike. Namen tega standarda je omogočiti natančno komunikacijo glede parametrov prehodov, impulzov in z njimi povezanih valovnih oblik ter tehnik in postopkov za njihovo merjenje.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prehodi, impulzi in z njimi povezane valovne oblike - Izrazi, definicije in algoritmi (IEC 60469:2013)Übergänge, Impulse und zugehörige Schwingungsabbilder- Begriffe, Definitionen und Algorithmen (IEC 60469:2013)Transitions, impulsions et formes d'ondes associées - Termes, définitions et algorithmes (CEI 60469:2013)Transitions, pulses and related waveforms - Terms, definitions and algorithms (IEC 60469:2013)17.220.20Measurement of electrical and magnetic quantities01.040.17Meroslovje in merjenje. Fizikalni pojavi (Slovarji)Metrology and measurement. Physical phenomena (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 60469:2013SIST EN 60469:2013en01-september-2013SIST EN 60469:2013SLOVENSKI
STANDARD
SIST EN 60469:2013
EUROPEAN STANDARD EN 60469 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60469:2013 E
ICS 01.040.17; 17.220.20
English version
Transitions, pulses and related waveforms -
Terms, definitions and algorithms (IEC 60469:2013)
Transitions, impulsions et formes d'ondes associées -
Termes, définitions et algorithmes (CEI 60469:2013)
Übergänge, Impulse und zugehörige Schwingungsabbilder - Begriffe, Definitionen und Algorithmen (IEC 60469:2013)
This European Standard was approved by CENELEC on 2013-05-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60469:2013
EN 60469:2013 - 2 -
Foreword The text of document 85/409/CDV, future edition 1 of IEC 60469, prepared by IEC/TC 85 "Measuring equipment for electrical and electromagnetic quantities" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60469:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-02-28 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-05-28
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60469:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: ISO 9000:2005 NOTE
Harmonised as EN ISO 9000:2005 (not modified). ISO 10012:2003 NOTE
Harmonised as EN ISO 10012:2003 (not modified).
SIST EN 60469:2013
IEC 60469 Edition 1.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Transitions, pulses and related waveforms – Terms, definitions and algorithms
Transitions, impulsions et formes d'ondes associées – Termes, définitions et algorithmes
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XB ICS 01.040.17; 17.220.20 PRICE CODE CODE PRIX ISBN 978-2-83220-747-5
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 60469:2013 colourinside
– 2 – 60469 © IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.