Information technology — Home electronic systems (HES) architecture — Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Remote access core protocol

ISO/IEC 14543-5-8:2017(E) specifies the core protocol of IGRS user and device remote access, including intelligent grouping and resource sharing.

Technologies de l'information — Architecture des systèmes électroniques domestiques (HES) — Partie 5-8: Titre manque

General Information

Status
Published
Publication Date
16-Aug-2017
Current Stage
6060 - International Standard published
Due Date
18-Jun-2018
Completion Date
17-Aug-2017
Ref Project

Buy Standard

Standard
ISO/IEC 14543-5-8:2017 - Information technology -- Home electronic systems (HES) architecture
English language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ISO/IEC 14543-5-8
Edition 1.0 2017-08
INTERNATIONAL
STANDARD

colour
inside
Information technology – Home electronic system (HES) architecture –
Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 –
Remote access core protocol
ISO/IEC 14543-5-8:2017-08(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 ISO/IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.


About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.

---------------------- Page: 2 ----------------------
ISO/IEC 14543-5-8


Edition 1.0 2017-08




INTERNATIONAL



STANDARD








colour

inside










Information technology – Home electronic system (HES) architecture –

Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 –

Remote access core protocol

























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION






ICS 35.200; 35.240.67 ISBN 978-2-8322-4693-1



  Warning! Make sure that you obtained this publication from an authorized distributor.

---------------------- Page: 3 ----------------------
– 2 – ISO/IEC 14543-5-8:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 10
4 Conformance . 11
5 IGRS RA overview . 11
6 IGRS RA service functional flow . 11
7 Registration management . 13
7.1 User or device registration flow . 13
7.2 User registration management . 14
7.3 Device registration management . 14
7.4 Registration response status code . 15
8 Login . 15
8.1 User or device login flow . 15
8.2 User connection . 16
8.3 Messages for user connection ID binding . 16
8.4 Device connection. 17
8.5 Messages for device connection ID binding . 17
9 Device access rights configuration . 18
9.1 Overview. 18
9.2 Messages for device access rights configuration request . 18
9.3 Messages for device access rights configuration response . 19
10 User and device relationship management. 20
10.1 Overview. 20
10.2 Relationship management mechanism . 23
10.3 Relationship establishment . 24
10.3.1 Messages for relationship establishment request . 24
10.3.2 Relationship establishment request procedure for IRSP . 24
10.3.3 Target accepts or rejects relationship establishment request . 25
10.3.4 IRSP processes relationship establishment acceptance message from
target . 26
10.4 Releasing relationship . 27
10.5 Device verification code management . 28
10.5.1 Device verification code management initiated by IGRS RA user . 28
10.5.2 Device verification code management initiated by IGRS RA device . 29
11 Message exchange . 30
11.1 Overview. 30
11.2 User or device ↔ User or device message exchange that needs response . 30
11.3 User or device ↔ User or device message exchange that does not need
response . 31
11.4 User or device ↔ IRSP message exchange . 32
11.5 IGRS RA server pushes message to user or device . 32
11.6 IGRS RA NAT traversal . 33

---------------------- Page: 4 ----------------------
ISO/IEC 14543-5-8:2017 © IEC 2017 – 3 –
11.7 Message exchange mode . 34
11.7.1 Overview . 34
11.7.2 Message exchange of “point-to-point” and “point-to- multiple-point” . 35
11.7.3 Message exchange of “instant transmission” and “offline storage” . 35
12 Logout . 35
13 User and device discovery and online status management . 36
14 Security . 38
Bibliography . 39

Figure 1 – Typical flow of IGRS RA service . 12
Figure 2 – IGRS RA user or device registration flow . 13
Figure 3 – IGRS RA User or Device Login Flow . 16
Figure 4 – Flow of relationship establishment request which needs approval from
target . 20
Figure 5 – Flow of relationship establishment request which does not need approval
from target . 20
Figure 6 – IGRS RA Relationships . 22
Figure 7 – Flow of relationship releasing . 27
Figure 8 – Flow of message exchange between user or device and user or device that
needs response . 30
Figure 9 – Flow of message exchange between user or device and user or device that
does not need response . 31
Figure 10 – Flow of message exchange between user or device and IRSP . 32
Figure 11 – IRSP pushes message to user or device . 33
Figure 12 – IGRS RA NAT traversal mechanism . 34
Figure 13 – Point-to-point message exchange in IGRS RA system . 35
Figure 14 – IGRS RA user or device offline flow . 36
Figure 15 – User and device discovery mechanisms in IGRS RA system . 37
Figure 16 – Non-uniqueness of user addressing . 38

Table 1 – Registration response status code and the contents in the registration
response messages . 15
Table 2 – Rules of IRSP processing target relationship establishment acceptance
response messages . 26

---------------------- Page: 5 ----------------------
– 4 – ISO/IEC 14543-5-8:2017 © IEC 2017
INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –

Part 5-8: Intelligent grouping and resource sharing for HES Class 2
and Class 3 – Remote access core protocol
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
established a joint technical committee, ISO/IEC JTC 1.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees and ISO member bodies.
3) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC National Committees and ISO member bodies in that sense. While all reasonable efforts are made to
ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held
responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees and ISO member bodies undertake to
apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and
regional publications. Any divergence between any ISO, IEC or ISO/IEC publication and the corresponding
national or regional publication should be clearly indicated in the latter.
5) ISO and IEC do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. ISO or IEC are not responsible
for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts
and members of their technical committees and IEC National Committees or ISO member bodies for any
personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC
publication or any other IEC, ISO or ISO/IEC publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC publication may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 14543-5-8 was prepared by subcommittee 25: Interconnection
of information technology equipment, of ISO/IEC joint technical committee 1: Information
technology.
The list of all currently available parts of the ISO/IEC 14543 series, under the general title
Information technology – Home electronic system (HES) architecture, can be found on the
IEC and ISO websites.
This International Standard has been approved by vote of the member bodies, and the voting
results may be obtained from the address given on the second title page.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 6 ----------------------
ISO/IEC 14543-5-8:2017 © IEC 2017 – 5 –
INTRODUCTION
The ISO/IEC 14543-5 series of standards specifies the services and protocol of the
application layer for Intelligent Grouping and Resource Sharing (IGRS) devices and services
in the Home Electronic System. Some parts reference Classes 1, 2 and 3, which are HES
designations specified in the HES architecture standard, ISO/IEC 14543-2-1.
The ISO/IEC 14543-5 series includes the following parts.
– Part 5-1: Core protocol
• Specifies the TCP/IP protocol stack as the basis and the HTTP protocol as the
message-exchange framework among devices.
• Specifies a series of device and service interaction/invocation standards, including
device and service discovery protocol, device and service description, service
invocation, security mechanisms, etc.
• Specifies core protocols for a type of home network that supports streaming media and
other high-speed data transports within a home.
– Parts 5-2#: Application profile
• Based on the IGRS core protocol.
• Specifies a device and service interaction mechanism, as well as application interfaces
used in IGRS basic applications.
• Multiple application profiles are specified, including:
– Part 5-21: AV profile
– Part 5-22: File profile
– Part 5-3: Basic application
• Includes an IGRS basic application list.
• Specifies a basic application framework.
• Specifies operation details (device grouping, service description template, etc.),
function definitions and service invocation interfaces.
– Part 5-4: Device validation
• Defines a standard method to validate an IGRS-compliant device.
– Part 5-5: Device type
• Specifies IGRS device types used in IGRS applications.
– Part 5-6: Service type
• Specifies basic service types used in IGRS applications.
– Part 5-7: Remote access system architecture
• Specifies the architecture and framework for the remote access of IGRS devices and
services in the Home Electronic System. The remote access communications protocol
and application profiles are specified in the following parts of ISO/IEC 14543-5:
– ISO/IEC 14543-5-8: Remote access core protocol
– ISO/IEC 14543-5-9: Remote access service platform
– ISO/IEC 14543-5-101: Remote AV access profile
– ISO/IEC 14543-5-102: Remote universal management profile
– ISO/IEC 14543-5-11: Remote user interface
– ISO/IEC 14543-5-12: Remote access test and verification
• The relationships among these parts are specified in Part 5-7.

---------------------- Page: 7 ----------------------
– 6 – ISO/IEC 14543-5-8:2017 © IEC 2017
– Part 5-8: Remote access core protocol
• Provides detailed system components, system function modules, basic concepts of
IGRS remote access elements and their relationships, message exchange mechanisms
and security related specifications.
• Specifies interfaces between IGRS Remote Access (RA) client and service platforms.
Defines co-operative procedures among IGRS RA clients.
– Part 5-9: Remote access service platform
• Specifies the IGRS RA service platform (IRSP) architectures and interfaces among
servers in the service platforms.
• Based on Part 5-8: Remote access core protocol.
– Parts 5-10#: Remote access application profiles
• Defines a device and service interaction mechanism for various applications.
• Based on Part 5-8: Remote access core protocol.
• Two profiles are under development:
1
– Part 5-101: Remote AV access profile. This part defines the common requirements
for IGRS RA AV users and devices in IGRS networks.
2
– Part 5-102: Remote universal management profile. This part specifies a
mechanism for integrating devices with both relatively high and low processing
capabilities into IGRS networks. It also specifies universal remote device discovery
and a management framework.
• Additional application profiles will be specified in the future.
3
– Part 5-11: Remote user interface
• Specifies adaptive user interface generation and remote device control mechanisms
suitable for different remote access applications and devices.
4
– Part 5-12: Remote access test and verification
• Defines a standard method to test and verify IGRS-RA compliant device and service
interfaces.
___________
1
 Under preparation. Stage at the time of publication: ISO/IEC DIS 14543-5-101:2017.
2
 Under preparation. Stage at the time of publication: ISO/IEC CD 14543-5-102:2016.
3
 Under preparation. Stage at the time of publication: ISO/IEC DIS 14543-5-11:2017.
4
 Under preparation. Stage at the time of publication: ISO/IEC DIS 14543-5-12:2017.

---------------------- Page: 8 ----------------------
ISO/IEC 14543-5-8:2017 © IEC 2017 – 7 –
INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –

Part 5-8: Intelligent grouping and resource sharing for HES
Class 2 and Class 3 – Remote access core protocol



1 Scope
This part of ISO/IEC 14543-5 specifies the core protocol of IGRS user and device remote
access, including intelligent grouping and resource sharing. The protocol features are:
a) IGRS RA user and IGRS RA device concepts and relationship management mechanisms,
b) user and device remote discovery and online and offline status management mechanisms,
c) user and device remote access message formats and message exchanging flows, and
d) remote data and service distribution and sharing mechanisms.
This document is applicable to remote access of an IGRS sub-network (called an IGRS
subnet) for resource sharing and service collaboration among home and/or remote computers,
consumer electronics and communication devices.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
ISO/IEC 14543-5-9, Information technology – Home electronic system (HES) architecture –
Part 5-9: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote
access service platform
ISO/IEC 9594-8 | Recommendation ITU-T X.509, Information technology – Open Systems
Interconnection – The Directory: Public-key and attribute certificate frameworks
IETF RFC 2616, Hypertext Transfer Protocol – HTTP/1.1
IETF RFC 2818, HTTP over TLS
IETF RFC 4422, Simple Authentication and Security Layer (SASL)
IETF RFC 5246, The Transport Layer Security (TLS) Protocol – Version 1.2
IETF RFC 6120, Extensible Messaging and Presence Protocol (XMPP): Core
IETF RFC 6121, Extensible Messaging and Presence Protocol (XMPP): Instant Messaging
and Presence
IETF RFC 7622, Extensible Messaging and Presence Protocol (XMPP): Address Format

---------------------- Page: 9 ----------------------
– 8 – ISO/IEC 14543-5-8:2017 © IEC 2017
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
binding
relationship established between a user and a device, which represents an own/owned
relationship between the user and the device
Note 1 to entry: The user and device with binding relationship are shown in each other’s roster. One user can
bind multiple devices, and one device can be bound by multiple users.
3.1.2
buddy
relationship established between two users, which represents that the two users trust each
other
Note 1 to entry: Two users with buddy relationship are shown in each other’s roster.
3.1.3
connection ID
instance identification that identifies the connection between “user and IRSP” and “device and
IRSP”
3.1.4
contact group
set of multiple contacts where each has the same attribute
3.1.5
device connection
network connection established between an IGRS RA device and the IRSP
Note 1 to entry: Only one device connection can be maintained at any time. Multiple devices of one user can
connect to the IRSP simultaneously.
3.1.6
device connection ID
identification that represents an instance of a connection between an IGRS RA device and the
IRSP
EXAMPLE If the device ID is“#igrsdevice@igrs.com” and the connection ID is “home”, the device connection ID is
“#igrsdevice@igrs.com/home”.
Note 1 to entry: A device connection ID is unique. The IRSP tests and guarantees the uniqueness of the device
connection ID.
Note 2 to entry: A device connection ID consists of a device ID and a connection ID. A “/” is used to separate
these two IDs.
3.1.7
device ID
unique identification of an IGRS RA device
EXAMPLE If the local part of a device ID is “#igrsdevice” and the domain name part of the user ID is “igrs.com”,
the device ID is “#igrsdevice@igrs.com”.
Note 1 to entry: A device ID consists of a local part and a domain name part. A “@” is used to separate the two
parts. Each device ID starts with a “#”.

---------------------- Page: 10 ----------------------
ISO/IEC 14543-5-8:2017 © IEC 2017 – 9 –
3.1.8
device verification code
string used to examine if the user has the authority to bind a device
Note 1 to entry: For a device without a user interface, the device verification code is used to bind a device to a
user. The device owner guarantees the safety of the device verification code.
3.1.9
IGRS RA device
physical device that is accessible to the IGRS RA user in the IGRS RA system
Note 1 to entry: A binding relationship can be established between an IGRS RA device and an IGRS RA user.
A sibling relationship can be established between two IGRS RA devices.
3.1.10
IGRS RA server
instantiation of a service provider that may be included in an IRSP
Note 1 to entry: An IGRS RA server is deployed on the Internet. It maintains relationships among IGRS RA user
and IGRS devices. It also provides re-transmission of collaborative messages. The IGRS RA user and IGRS device
can start a data connection to the IRSP and supports interconnections using the data connection and re-
transmission functions of the IRSP.
3.1.11
IGRS RA service platform
IRSP
collection of multiple IGRS RA servers that are deployed on the Internet to maintain the
relationships among IGRS RA user and IGRS RA device and to exchange collaborative
messages
Note 1 to entry: IGRS RA user and device can establish connections to the IRSP, can send collaborative
messages over these connections and can exchange messages in the servers of the IRSP.
3.1.12
IGRS RA user
entity that uses the IGRS RA devices and application services
Note 1 to entry: Generally, an IGRS RA user is a human being. Each IGRS RA user should have a unique user ID
(identification). A bundle relationship can be established between one IGRS RA user and another. A binding
relationship can be established between one IGRS RA user and one IGRS device.
3.1.13
interested connection
connection that logged onto the IRSP using a user ID and requested the roster of that user
3.1.14
roster
list that stores all users and devices by which this specific user or device is permitted access
Note 1 to entry: A roster is managed by the IRSP. Each user or device has one and only one roster on the IRSP.
3.1.15
roster item
item in the roster
3.1.16
service ID
identification of a service

---------------------- Page: 11 ----------------------
– 10 – ISO/IEC 14543-5-8:2017 © IEC 2017
3.1.17
sibling
relationship established between two or more devices, which represents that these devices
have a binding relationship with the same user, or these devices belong to the same user
Note 1 to entry: Devices with sibling relationship are shown in each other’s roster.
3.1.18
user connection
network connection established between an IGRS RA user and the IRSP
Note 1 to entry: Multiple user connections can be maintained simultaneously for one user.
3.1.19
user connection ID
identification that represents an instance of a connection between an IGRS RA user and the
IRSP
EXAMPLE If the user ID is “igrsuser@igrs.com” and the connection ID is “office”, the user connection ID is
“igrsuser@igrs.com/office”.
Note 1 to entry: A user connection ID is unique. The IRSP tests and guarantees the uniqueness of a user
connection ID.
Note 2 to entry: A user connection ID consists of a user ID and a connection ID. A “/” is used to separate the two
IDs.
Note 3 to entry: The connection ID is set by the user when logging in.
3.1.20
user ID
unique identification of an IGRS RA user
EXAMPLE If the local part of a user ID is “igrsuser” and the domain name part of the user ID is “igrs.com”, the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.