Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding

ISO 3385:2014 specifies a method for the determination of loss in thickness and loss in hardness of flexible cellular materials intended for use in load-bearing applications such as upholstery. It provides a means of assessing the service performance of flexible cellular materials based on rubber latex or polyurethane used in load-bearing upholstery. The method is applicable both to standard size test pieces cut from slabstock material and to shaped components. The measured loss in thickness and loss in hardness are related to, but are not necessarily the same as, the losses likely to occur in service. ISO 3385:2014 is not intended to function as a detailed engineering design specification for fatigue apparatus.

Matériaux polymères alvéolaires souples — Détermination de la fatigue par indentation à charge constante

L'ISO 3385:2014 spécifie une méthode de détermination des pertes d'épaisseur et de dureté des matériaux alvéolaires souples destinés à être utilisés dans des applications porteuses comme les rembourrages. Elle apporte un moyen d'évaluation des performances en service des matériaux alvéolaires souples à base de latex caoutchouc ou de polyuréthane, utilisés dans les rembourrages porteurs. La méthode est applicable à la fois à des éprouvettes normales découpées dans un bloc de matériau et dans des éléments façonnés. Les pertes d'épaisseur et de dureté mesurées sont liées aux pertes susceptibles de se produire en cours d'utilisation, mais ce ne sont pas nécessairement les mêmes. L'ISO 3385:2014 internationale n'est pas destinée à faire office de spécification technique détaillée relative à la conception des machines d'essai de fatigue.

General Information

Status
Published
Publication Date
13-Jul-2014
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project

Relations

Buy Standard

Standard
ISO 3385:2014 - Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding
English language
13 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3385:2014 - Matériaux polymères alvéolaires souples -- Détermination de la fatigue par indentation à charge constante
French language
14 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3385:2014 - Matériaux polymeres alvéolaires souples -- Détermination de la fatigue par indentation a charge constante
French language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 3385
Fourth edition
2014-07-15
Flexible cellular polymeric
materials — Determination of fatigue
by constant-load pounding
Matériaux polymères alvéolaires souples — Détermination de la
fatigue par indentation à charge constante
Reference number
ISO 3385:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 3385:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3385:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Test pieces . 4
5.1 Shape and dimensions . 4
5.2 Samples showing orientation . 5
5.3 Number . 5
5.4 Conditioning . 5
6 Procedure. 5
7 Expression of results . 6
7.1 Loss in thickness. 6
7.2 Loss in hardness . 7
7.3 Percentage hardness loss . 7
8 Precision . 7
9 Test report . 7
Annex A (informative) Typical loading cycle. 9
Annex B (informative) P
...

NORME ISO
INTERNATIONALE 3385
Quatrième édition
2014-07-15
Matériaux polymères alvéolaires
souples — Détermination de la fatigue
par indentation à charge constante
Flexible cellular polymeric materials — Determination of fatigue by
constant-load pounding
Numéro de référence
ISO 3385:2014(F)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 3385:2014(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2014
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2014 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 3385:2014(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Principe . 1
4 Appareillage . 1
5 Éprouvettes . 4
5.1 Forme et dimensions . 4
5.2 Échantillons présentant une orientation . 5
5.3 Quantité . 5
5.4 Conditionnement . 5
6 Mode opératoire. 5
7 Expression des résultats. 6
7.1 Perte d’épaisseur . 6
7.2 Perte de dureté . 7
7.3 Pourcentage de perte de dureté . 7
8 Fidélité . 7
9 Rapport d’essai . 7
Annexe A (informative) Cycle type d’application de la charge . 9
Annexe B (informative) Fidélité.
...

PROJET DE NORME INTERNATIONALE ISO/DIS 3385
ISO/TC 45/SC 4 Secrétariat: DSM
Début de vote Vote clos le

2012-03-22 2012-08-22
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION    МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ    ORGANISATION INTERNATIONALE DE NORMALISATION


Matériaux polymères alvéolaires souples — Détermination de la
fatigue par indentation à charge constante
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
[Révision de la troisième édition (ISO 3385:1989)]
ICS 83.100


TRAITEMENT PARALLÈLE ISO/CEN
Le présent projet a été élaboré dans le cadre de l'Organisation internationale de normalisation (ISO) et
soumis selon le mode de collaboration sous la direction de l'ISO, tel que défini dans l'Accord de
Vienne.
Le projet est par conséquent soumis en parallèle aux comités membres de l'ISO et aux comités
membres du CEN pour enquête de cinq mois.
En cas d'acceptation de ce projet, un projet final, établi sur la base des observations reçues, sera
soumis en parallèle à un vote d'approbation de deux mois au sein de l'ISO et à un vote formel au sein
du CEN.


Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.

CE DOCUMENT EST UN PROJET DIFFUSÉ POUR OBSERVATIONS ET APPROBATION. IL EST DONC SUSCEPTIBLE DE MODIFICATION ET NE
PEUT ETRE CITE COMME NORME INTERNATIONALE AVANT SA PUBLICATION EN TANT QUE TELLE.
OUTRE LE FAIT D'ETRE EXAMINES POUR ETABLIR S'ILS SONT ACCEPTABLES A DES FINS INDUSTRIELLES, TECHNOLOGIQUES ET
COMMERCIALES, AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES PROJETS DE NORMES INTERNATIONALES DOIVENT PARFOIS ETRE
CONSIDERES DU POINT DE VUE DE LEUR POSSIBILITE DE DEVENIR DES NORMES POUVANT SERVIR DE REFERENCE DANS LA
REGLEMENTATION NATIONALE.
LES DESTINATAIRES DU PRÉSENT PROJET SONT INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS, NOTIFICATION DES DROITS DE PRO-
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE.
©  Organisation Internationale de Normalisation, 2012

---------------------- Page: 1 ----------------------
ISO/DIS 3385


Notice de droit d'auteur
Ce document de l'ISO est un projet de Norme internationale qui est protégé par les droits d'auteur de l'ISO.
Sauf autorisé par les lois en matière de droits d'auteur du pays utilisateur, aucune partie de ce projet ISO ne
peut être reproduite, enregistrée dans un système d'extraction ou transmise sous quelque forme que ce soit
et par aucun procédé électronique ou mécanique, y compris la photocopie, les enregistrements ou autres,
sans autorisation écrite préalable.
Les demandes d'autorisation de reproduction doivent être envoyées à l'ISO à l'adresse ci-après ou au
comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Toute reproduction est soumise au paiement de droits ou à un contrat de licence.
Les contrevenants pourront être poursuivis.

ii © ISO 2012 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/DIS 3385

Sommaire Page
Avant-propos .iv
1 Domaine d'application .1
2 Références normatives.1
3 Principe.1
4 Appareillage .2
5 Eprouvettes.4
5.1 Forme et dimensions .4
5.2 Echantillons présentant une orientation.5
5.3 Quantité .5
5.4 Conditionnement.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.