Cellular plastic — Cellulose foam thermal insulation — Material specification

ISO 21844:2018 specifies material requirements and identifies the test methods to be used to determine these requirements for cellulose foam for thermal insulation for buildings and other applications. There are four categories of material characterized by the density of the material.

Plastiques alvéolaires — Matériau d'isolation à base de mousse de cellulose — Spécifications

General Information

Status
Published
Publication Date
24-Apr-2018
Current Stage
9093 - International Standard confirmed
Completion Date
25-Sep-2023
Ref Project

Buy Standard

Standard
ISO 21844:2018 - Cellular plastic -- Cellulose foam thermal insulation -- Material specification
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 21844
First edition
2018-04
Cellular plastic — Cellulose foam
thermal insulation — Material
specification
Plastiques alvéolaires — Matériau d'isolation à base de mousse de
cellulose — Spécifications
Reference number
ISO 21844:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 21844:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 21844:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
4.1 Dyes and fluorescent whitening agent . 2
4.2 Foreign matters . 2
4.3 Manufacturing process. 2
4.4 Toxic substance . 2
4.5 Appearance . 2
4.6 Performance . 2
4.7 Dimension . 3
5 Test methods . 3
5.1 Sampling . 3
5.2 Specimen preparation . 3
5.3 Appearance . 3
5.4 Conditioning of specimens . 3
5.5 Laboratory conditions when testing is conducted .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.