ISO 1922:2018
(Main)Rigid cellular plastics — Determination of shear properties
Rigid cellular plastics — Determination of shear properties
This document specifies a procedure of determining the shear strength of rigid cellular plastics. It also provides for the determination of shear modulus and shear strain.
Titre manque
Penjeni polimerni materiali - Ugotavljanje nateznih lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 1922:2020
01-september-2020
Penjeni polimerni materiali - Ugotavljanje nateznih lastnosti
Rigid cellular plastics - Determination of shear properties
Ta slovenski standard je istoveten z: ISO 1922:2018
ICS:
83.100 Penjeni polimeri Cellular materials
SIST ISO 1922:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 1922:2020
---------------------- Page: 2 ----------------------
SIST ISO 1922:2020
INTERNATIONAL ISO
STANDARD 1922
Fifth edition
2018-09
Rigid cellular plastics —
Determination of shear properties
Reference number
ISO 1922:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
SIST ISO 1922:2020
ISO 1922:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 1922:2020
ISO 1922:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Dimensions of test specimens . 5
6.1 General . 5
6.2 Single shear test specimen. 5
6.3 Double shear test specimen . 5
7 Number of test specimens . 5
8 Conditioning and test temperature and humidity. 6
9 Procedure. 6
10 Calculation and expression of results . 7
10.1 Shear strength . 7
10.2 Shear modulus . 7
10.3 Shear strain
...
INTERNATIONAL ISO
STANDARD 1922
Fifth edition
2018-09
Rigid cellular plastics —
Determination of shear properties
Reference number
ISO 1922:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 1922:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 1922:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Dimensions of test specimens . 5
6.1 General . 5
6.2 Single shear test specimen. 5
6.3 Double shear test specimen . 5
7 Number of test specimens . 5
8 Conditioning and test temperature and humidity. 6
9 Procedure. 6
10 Calculation and expression of results . 7
10.1 Shear strength . 7
10.2 Shear modulus . 7
10.3 Shear strain at fracture . 7
11 Precision and bias . 8
12 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.