SIST EN ISO 3386-1:2000
(Main)Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
Covers the determination of material with a density up to 250 kg/m3. It also indicates a method for the calculation of the compression stress value of such materials. The compression stress/strain characteristic is a measure of the load-bearing properties of the material. Two formulas allow to calculate the results. Part 2 refers to high density materials. Constitutes a minor revision of the first edition (ISO 3386/1-1979).
Weichelastische Schaumstoffe - Bestimmung der Druckspannungs-Verformungseigenschaften - Teil 1: Materialien mit niedriger Dichte (ISO 3386-1:1986)
Dieser Teil der ISO 3386 legt ein Verfahren für die Bestimmung der Druckspannungs-Verformungseigenschaften von weichelastischen Schaumstoffen mit einer Dichte größer als 250 kg/m3 fest. Er gibt auch ein Verfahren für die Berechnung des Druckspannungswertes solcher Marerialien an. Die Druckspannungs-Verformungseigenschaften sind ein Maß für die tragenden Eigenschaften des Materials, lassen jedoch keine Aussage zum Verhalten bei Langzeitbelastung zu.
Matériaux polymeres alvéolaires souples - Détermination de la caractéristique de contrainte-déformation relative en compression - Partie 1: Matériaux a basse masse volumique (ISO 3386-1:1986)
La présente partie de l'ISO 3386 spécifie une méthode de détermination de la caractéristique de contrainte-déformation relative en compression des matériaux polymères alvéolaires souples à basse masse volumique, jusqu'à 250 kg/m3. Elle indique également un mode de calcul de la valeur de la contrainte en compression de tels matériaux. La caractéristique de contrainte-déformation relative en compression est une mesure de l'aptitude du matériau à supporter des charges, mais pas nécessairement des charges de longue durée. La caractéristique de contrainte-déformation relative en compression diffère des caractéristiques de dureté par indentation (déterminées conformément à l'ISO 2439), lesquelles, comme on le sait, sont influencées par l'épaisseur et les caractéristiques de traction du matériau alvéolaire souple soumis à l'essai, par la forme de la plaque de compression et par la forme et les dimensions de l'éprouvette. L'ISO 3386/2 spécifie une méthode pour les maté
Penjeni polimerni materiali - Mehke pene - Določanje diagrama napetost/raztezek - 1. del: Materiali z nizko gostoto (ISO 3386-1:1986)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3386-1:2000
01-maj-2000
3HQMHQLSROLPHUQLPDWHULDOL0HKNHSHQH'RORþDQMHGLDJUDPDQDSHWRVWUD]WH]HN
GHO 0DWHULDOL]QL]NRJRVWRWR ,62
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in
compression - Part 1: Low-density materials (ISO 3386-1:1986)
Weichelastische Schaumstoffe - Bestimmung der Druckspannungs-
Verformungseigenschaften - Teil 1: Materialien mit niedriger Dichte (ISO 3386-1:1986)
Matériaux polymeres alvéolaires souples - Détermination de la caractéristique de
contrainte-déformation relative en compression - Partie 1: Matériaux a basse masse
volumique (ISO 3386-1:1986)
Ta slovenski standard je istoveten z: EN ISO 3386-1:1997
ICS:
83.100 Penjeni polimeri Cellular materials
SIST EN ISO 3386-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3386-1:2000
---------------------- Page: 2 ----------------------
SIST EN ISO 3386-1:2000
---------------------- Page: 3 ----------------------
SIST EN ISO 3386-1:2000
---------------------- Page: 4 ----------------------
SIST EN ISO 3386-1:2000
---------------------- Page: 5 ----------------------
SIST EN ISO 3386-1:2000
---------------------- Page: 6 ----------------------
SIST EN ISO 3386-1:2000
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPO~HAR OPfAHM3ALWlR fl0 CTAH~APTbl3Al@lM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Polymeric materials, cellular flexible - Determination
of stress-strain characteristic in compression -
Part 1 : Low-density materials
Matkiaux polym&es alvkolaires souples - 06 termina tion de Ia carac tkristique de con train te-dhforma tion relative en
compression - Partie 7 : Mathriaux 2 basse masse volumique
Second edition - 1986-06-01
UDC 678-405.8 : 620.173 Ref. No. ISO 3386/1-1986 (E)
Descriptors : ru bber, plastics, Polymers, flexible cellular materials, tests, compression tests.
Price based on 3 pages
---------------------- Page: 7 ----------------------
SIST EN ISO 3386-1:2000
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 3386/1 was prepared by Technical Committee ISO/TC 45,
Rubber and rubber products.
This second edition cancels and replaces the first edition (ISO 3386/1-1979), of which
it constitutes a minor revision.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless othetwise stated.
0 International Organkation for Standardkation, 1986 l
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 3386-1:2000
ISO 3386/1-1986 (EI
INTERNATIONAL STANDARD
Polymeric materials, cellular flexible - Determination
of stress-strain characteristic in compression -
Part 1 : Low-density materials
1 3 Def initions
Scope and field of application
This part of ISO 3386 specifies a method for the determination For the purposes of this International Standard the following
of the compression stress/strain characteristic of low-density definitions apply.
flexible cellular materials up to 250 kg/m? lt also indicates a
method for the calculation of the compression stress value of
3.1 compression stresdstrain characteristic (CC) : The
such materials.
stress, expressed in kilopascals”, required to produce a com-
Pression, at a constant rate of deformation during the fourth
The compression stress/strain characteristic is a measure of the
loading cycle of the test specified below, expressed as a func-
load-bearing properties of the material, though not necessarily
tion of the compression.
of its capacity to sustain a long-term load.
3.2 compression stress value KV,): The compression
The compression stress/strain characteristic differs from the
stress/strain characteristic for a compression of 40 %.
indentation hardness characteristics (as determined in accord-
ante with ISO 24391, which are known to be influenced by the
thickness and the tensile properties of the flexible cellular
material under test, by the shape of the compression plate and
4 Apparatus
by the shape and size of the test piece.
4.1 Test machine
ISO 3386/2 specifies a method for high-density materials and
differs from part 1 in the following ways:
The test machine shall be capable of compressing the test piece
between a support surface (sec 4.2) and a compression plate
-
it is mainly concerned with materials of density above
(see 4.3), which shall have a uniform relative rate of motion in
250 kglm3;
the vertical direction of 100 I!Z 20 mm/min.
-
compression stress values have been deleted;
The test machine shall be capable of measuring the forte re-
quired to produce the specified compression wi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.