ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment - Harmonised Standard for ElectroMagnetic Compatibility

The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS),
combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such
technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.1] is given in Annex A.

Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 50. del: Posebni pogoji za ponavljalniško (repetitorsko) in pomožno opremo celičnih komunikacijskih baznih postaj (BS) - Harmonizirani standard za elektromagnetno združljivost

General Information

Status
Published
Public Enquiry End Date
28-Feb-2021
Publication Date
23-Mar-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Mar-2021
Due Date
27-May-2021
Completion Date
24-Mar-2021

Buy Standard

Standard
ETSI EN 301 489-50 V2.3.1 (2021-03) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
English language
33 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
EN 301 489-50 V2.3.1:2021
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 301 489-50 V2.2.2 (2020-12) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
English language
33 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
prEN 301 489-50 V2.2.2:2021
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

ETSI EN 301 489-50 V2.3.1 (2021-03)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication
Base Station (BS), repeater and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility

---------------------- Page: 1 ----------------------
2 ETSI EN 301 489-50 V2.3.1 (2021-03)



Reference
REN/ERM-EMC-407
Keywords
5G, EMC, GSM, harmonised standard, LTE,
MSR, NR, OFDMA, WCDMA, WMAN

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 489-50 V2.3.1 (2021-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Test conditions . 14
4.1 General . 14
4.2 Arrangements for establishing a communication link . 15
4.2.0 Specification of Channel Number . 15
4.2.1 Arrangements for test signals at the input of transmitters . 15
4.2.2 Arrangements for test signals at the output of transmitters . 15
4.2.3 Arrangements for test signals at the input of receivers . 16
4.2.3.0 General . 16
4.2.3.1 UTRA . 16
4.2.3.2 E-UTRA . 16
4.2.3.3 E-UTRA BS operating in band 46 (LAA) . 16
4.2.3.4 E-UTRA with in band or guard band NB-IoT. 16
4.2.3.5 OFDMA WMAN . 16
4.2.3.6 Standalone NB-IoT . 17
4.2.3.7 GSM/EDGE . 17
4.2.3.8 CDMA . 17
4.2.3.9 MSR . 17
4.2.3.10 NR . 17
4.2.3.10.1 NR BS type 1-C and 1-H . 17
4.2.3.10.2 NR BS type 1-O. 17
4.2.3.10.3 NR BS type 2-O. 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for test signals for repeaters . 17
4.3 Exclusion bands . 18
4.3.0 General . 18
4.3.1 Transmitter exclusion band . 18
4.3.1.0 General . 18
4.3.1.1 OTA type BS for FR1 . 18
4.3.2 Receiver exclusion band . 18
4.3.2.0 General . 18
4.3.2.1 Non-AAS BS, Hybrid AAS BS and NR BS Type 1-C . 18
4.3.2.2 OTA AAS BS and NR BS Type 1-O . 18
4.3.3 Multi-band BS . 19
4.4 Narrow band responses of receivers . 19
4.5 Void . 20
4.6 Test configurations . 20
4.6.1 Emission . 20
4.6.2 Immunity . 20
4.6.3 MSR . 21
5 Performance assessment . 21
5.0 General . 21
5.1 UTRA . 22
5.1.1 BLER on DL . 22
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 489-50 V2.3.1 (2021-03)
5.1.2 BLER on UL . 22
5.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 22
5.2.1 Throughput on DL . 22
5.2.2 Throughput on UL . 22
5.3 OFDMA WMAN . 22
5.3.1 Throughput on DL . 22
5.3.2 Throughput on UL . 22
5.4 NR . 22
5.4.1 Throughput on DL . 22
5.4.2 Throughput on UL . 22
5.5 GSM/EDGE . 23
5.5.1 BER on DL . 23
5.5.1.0 General . 23
5.5.1.1 Assessment of BER using static layer 1 functions . 23
5.5.1.2 Assessment of BER using RXQUAL . 23
5.5.2 BER on UL . 23
5.5.2.0 General . 23
5.5.2.1 Assessment of BER using RXQUAL . 23
5.5.2.2 Assessment of BER using reported BER . 23
5.6 CDMA . 23
5.6.1 FER on DL . 23
5.6.2 FER on UL . 23
5.7 Assessment of RF gain variations of repeaters . 24
5.8 Ancillary equipment . 24
5.9 Equipment classification . 24
6 Performance criteria . 24
6.1 Performance criteria for continuous phenomena . 24
6.1.0 General . 24
6.1.1 Base Stations . 24
6.1.1.1 UTRA . 24
6.1.1.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT . 24
6.1.1.3 Standalone NB-IoT . 25
6.1.1.4 GSM/EDGE . 25
6.1.1.5 CDMA . 26
6.1.1.6 NR . 26
6.1.2 Repeaters . 27
6.2 Performance criteria for transient phenomena . 27
6.2.0 General . 27
6.2.1 Repeaters . 27
7 Requirements . 28
7.1 Emission . 28
7.2 Immunity . 28
7.2.1 General . 28
7.2.2 Modified requirements . 29
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 30
Annex B (informative): Change history . 32
History . 33


ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 489-50 V2.3.1 (2021-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.15] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

National transposition dates
Date of adoption of this EN: 9 March 2021
Date of latest announcement of this EN (doa): 30 June 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2021
Date of withdrawal of any conflicting National Standard (dow): 31 December 2022

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 301 489-50 V2.3.1 (2021-03)
1 Scope
The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Table 1: Cellular Mobile Communication Technologies
Technology
Technology Generation Standard SET ETSI Standard
(Air technology)
GSM 2G/3G IMT-2000 SC (single carrier) ETSI EN 301 502 [8]
(GSM/EDGE) ETSI TS 137 104 [21]

ETSI TS 137 141 [12]
CDMA 2000 3G CDMA2000 (IMT-MC multi ETSI EN 301 526 [i.2]
carrier) ETSI EN 301 908-5 [i.7]
ETSI EN 301 908-7 [i.8]
ETSI EN 301 449 [i.11]
ETSI EN 302 426 [i.12]
UMTS 3G IMT-2000 Direct Spread ETSI TS 125 104 [i.3]
(UTRA, W-CDMA) ETSI TS 125 105 [i.4]
ETSI TS 125 106 [i.5]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA)
ETSI TS 136 141[6]
ETSI TS 136 106 [i.6]
ETSI TS 136 143 [25]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA), AAS
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]

MSR (see note 2) 4G IMT-advanced ETSI TS 137 104 [21]
AAS ETSI TS 137 141 [12]
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]
WMAN 3G IMT-2000 OFDMA ETSI EN 301 908-22 [16]
(OFDMA)

NR
5G IMT-advanced ETSI TS 138 104 [20]
OTA ETSI TS 138 141-1 [10]
ETSI TS 138 141-2 [17]
Standalone NB-IoT 4G IMT-2000 ETSI TS 136 104 [5]
NOTE 1: Including LAA, inband NB-IoT or guard band NB-IoT.
NOTE 2: Combination of technologies GSM, W-CDMA, LTE and NR.

Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS),
combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such
technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.1] is given in Annex A.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 301 489-50 V2.3.1 (2021-03)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 125 141 (V15.4.0) (04-2019): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 15.4.0 Release 15)".
[3] ETSI TS 125 142 (V15.0.1) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 15.0.1 Release 15)".
[4] ETSI TS 125 143 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
UTRA repeater conformance testing (3GPP TS 25.143 version 15.0.0 Release 15)".
[5] ETSI TS 136 104 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 15.8.0
Release 15)".
[6] ETSI TS 136 141 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 15.8.0 Release 15)".
[7] ETSI TS 145 008 (V15.6.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); GSM/EDGE Radio subsystem link control (3GPP TS 45.008 version 15.6.0 Release 15)".
[8] ETSI EN 301 502 (V12.5.2) (03-2017): "Global System for Mobile communications (GSM); Base
Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of
the Directive 2014/53/EU".
[9] ETSI TS 151 021 (V15.3.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021
version 15.3.0 Release 15)".
[10] ETSI TS 138 141-1 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing; Part 1:
Conducted conformance testing (3GPP TS 38.141-1 version 15.5.0 Release 15)".
[11] ETSI TS 138 101-4 (V15.5.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 4: Performance requirements (3GPP TS 38.101-4 version 15.5.0 Release 15)".
[12] ETSI TS 137 141 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP
TS 37.141 version 15.10.0 Release 15)".
[13] ETSI TS 137 145-1 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1:
conducted conformance testing (3GPP TS 37.145-1 version 15.6.0 Release 15)".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 301 489-50 V2.3.1 (2021-03)
[14] ETSI TS 137 145-2 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 2:
radiated conformance testing (3GPP TS 37.145-2 version 15.6.0 Release 15)".
[15] ETSI EN 301 908-20 (V6.3.1) (05-2016): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD
WMAN (Mobile WiMAX™) TDD Base Stations (BS)".
[16] ETSI EN 301 908-22 (V6.1.1) (07-2016): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD
WMAN (Mobile WiMAX™) FDD Base Stations (BS)".
[17] ETSI TS 138 141-2 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing; Part 2:
Radiated conformance testing (3GPP TS 38.141-2 version 15.5.0 Release 15)".
[18] TIA-97 (2014): "Recommended Minimum Performance Standard for cdma2000 Spread Spectrum
Base Stations".
[19] TIA-2000 Series, Revision F (2014): "Introduction to CDMA2000 spread spectrum systems
**Includes TIA-2000.1 (2013), TIA-2000.2 (2014), TIA-2000.3 (2014), TIA-2000.4 (2014), and
TIA-2000.5 **".
[20] ETSI TS 138 104 (V15.9.0) (04-2020): "5G; NR; Base Station (BS) radio transmission and
reception (3GPP TS 38.104 version 15.9.0 Release 15)".
[21] ETSI TS 137 104 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and
reception (3GPP TS 37.104 version 15.10.0 Release 15)".
[22] ETSI TS 125 101 (V15.3.0) (05-2
...

SLOVENSKI STANDARD
SIST EN 301 489-50 V2.3.1:2021
01-maj-2021
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 50.
del: Posebni pogoji za ponavljalniško (repetitorsko) in pomožno opremo celičnih
komunikacijskih baznih postaj (BS) - Harmonizirani standard za elektromagnetno
združljivost
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
50: Specific conditions for Cellular Communication Base Station (BS), repeater and
ancillary equipment - Harmonised Standard for ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-50 V2.3.1 (2021-03)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-50 V2.3.1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 301 489-50 V2.3.1:2021

---------------------- Page: 2 ----------------------
SIST EN 301 489-50 V2.3.1:2021
ETSI EN 301 489-50 V2.3.1 (2021-03)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication
Base Station (BS), repeater and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility

---------------------- Page: 3 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 2 ETSI EN 301 489-50 V2.3.1 (2021-03)



Reference
REN/ERM-EMC-407
Keywords
5G, EMC, GSM, harmonised standard, LTE,
MSR, NR, OFDMA, WCDMA, WMAN

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 3 ETSI EN 301 489-50 V2.3.1 (2021-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Test conditions . 14
4.1 General . 14
4.2 Arrangements for establishing a communication link . 15
4.2.0 Specification of Channel Number . 15
4.2.1 Arrangements for test signals at the input of transmitters . 15
4.2.2 Arrangements for test signals at the output of transmitters . 15
4.2.3 Arrangements for test signals at the input of receivers . 16
4.2.3.0 General . 16
4.2.3.1 UTRA . 16
4.2.3.2 E-UTRA . 16
4.2.3.3 E-UTRA BS operating in band 46 (LAA) . 16
4.2.3.4 E-UTRA with in band or guard band NB-IoT. 16
4.2.3.5 OFDMA WMAN . 16
4.2.3.6 Standalone NB-IoT . 17
4.2.3.7 GSM/EDGE . 17
4.2.3.8 CDMA . 17
4.2.3.9 MSR . 17
4.2.3.10 NR . 17
4.2.3.10.1 NR BS type 1-C and 1-H . 17
4.2.3.10.2 NR BS type 1-O. 17
4.2.3.10.3 NR BS type 2-O. 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for test signals for repeaters . 17
4.3 Exclusion bands . 18
4.3.0 General . 18
4.3.1 Transmitter exclusion band . 18
4.3.1.0 General . 18
4.3.1.1 OTA type BS for FR1 . 18
4.3.2 Receiver exclusion band . 18
4.3.2.0 General . 18
4.3.2.1 Non-AAS BS, Hybrid AAS BS and NR BS Type 1-C . 18
4.3.2.2 OTA AAS BS and NR BS Type 1-O . 18
4.3.3 Multi-band BS . 19
4.4 Narrow band responses of receivers . 19
4.5 Void . 20
4.6 Test configurations . 20
4.6.1 Emission . 20
4.6.2 Immunity . 20
4.6.3 MSR . 21
5 Performance assessment . 21
5.0 General . 21
5.1 UTRA . 22
5.1.1 BLER on DL . 22
ETSI

---------------------- Page: 5 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 4 ETSI EN 301 489-50 V2.3.1 (2021-03)
5.1.2 BLER on UL . 22
5.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 22
5.2.1 Throughput on DL . 22
5.2.2 Throughput on UL . 22
5.3 OFDMA WMAN . 22
5.3.1 Throughput on DL . 22
5.3.2 Throughput on UL . 22
5.4 NR . 22
5.4.1 Throughput on DL . 22
5.4.2 Throughput on UL . 22
5.5 GSM/EDGE . 23
5.5.1 BER on DL . 23
5.5.1.0 General . 23
5.5.1.1 Assessment of BER using static layer 1 functions . 23
5.5.1.2 Assessment of BER using RXQUAL . 23
5.5.2 BER on UL . 23
5.5.2.0 General . 23
5.5.2.1 Assessment of BER using RXQUAL . 23
5.5.2.2 Assessment of BER using reported BER . 23
5.6 CDMA . 23
5.6.1 FER on DL . 23
5.6.2 FER on UL . 23
5.7 Assessment of RF gain variations of repeaters . 24
5.8 Ancillary equipment . 24
5.9 Equipment classification . 24
6 Performance criteria . 24
6.1 Performance criteria for continuous phenomena . 24
6.1.0 General . 24
6.1.1 Base Stations . 24
6.1.1.1 UTRA . 24
6.1.1.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT . 24
6.1.1.3 Standalone NB-IoT . 25
6.1.1.4 GSM/EDGE . 25
6.1.1.5 CDMA . 26
6.1.1.6 NR . 26
6.1.2 Repeaters . 27
6.2 Performance criteria for transient phenomena . 27
6.2.0 General . 27
6.2.1 Repeaters . 27
7 Requirements . 28
7.1 Emission . 28
7.2 Immunity . 28
7.2.1 General . 28
7.2.2 Modified requirements . 29
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 30
Annex B (informative): Change history . 32
History . 33


ETSI

---------------------- Page: 6 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 5 ETSI EN 301 489-50 V2.3.1 (2021-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.15] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.

National transposition dates
Date of adoption of this EN: 9 March 2021
Date of latest announcement of this EN (doa): 30 June 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2021
Date of withdrawal of any conflicting National Standard (dow): 31 December 2022

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 6 ETSI EN 301 489-50 V2.3.1 (2021-03)
1 Scope
The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Table 1: Cellular Mobile Communication Technologies
Technology
Technology Generation Standard SET ETSI Standard
(Air technology)
GSM 2G/3G IMT-2000 SC (single carrier) ETSI EN 301 502 [8]
(GSM/EDGE) ETSI TS 137 104 [21]

ETSI TS 137 141 [12]
CDMA 2000 3G CDMA2000 (IMT-MC multi ETSI EN 301 526 [i.2]
carrier) ETSI EN 301 908-5 [i.7]
ETSI EN 301 908-7 [i.8]
ETSI EN 301 449 [i.11]
ETSI EN 302 426 [i.12]
UMTS 3G IMT-2000 Direct Spread ETSI TS 125 104 [i.3]
(UTRA, W-CDMA) ETSI TS 125 105 [i.4]
ETSI TS 125 106 [i.5]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA)
ETSI TS 136 141[6]
ETSI TS 136 106 [i.6]
ETSI TS 136 143 [25]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA), AAS
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]

MSR (see note 2) 4G IMT-advanced ETSI TS 137 104 [21]
AAS ETSI TS 137 141 [12]
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]
WMAN 3G IMT-2000 OFDMA ETSI EN 301 908-22 [16]
(OFDMA)

NR
5G IMT-advanced ETSI TS 138 104 [20]
OTA ETSI TS 138 141-1 [10]
ETSI TS 138 141-2 [17]
Standalone NB-IoT 4G IMT-2000 ETSI TS 136 104 [5]
NOTE 1: Including LAA, inband NB-IoT or guard band NB-IoT.
NOTE 2: Combination of technologies GSM, W-CDMA, LTE and NR.

Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS),
combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such
technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.1] is given in Annex A.
ETSI

---------------------- Page: 8 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 7 ETSI EN 301 489-50 V2.3.1 (2021-03)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 125 141 (V15.4.0) (04-2019): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 15.4.0 Release 15)".
[3] ETSI TS 125 142 (V15.0.1) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 15.0.1 Release 15)".
[4] ETSI TS 125 143 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
UTRA repeater conformance testing (3GPP TS 25.143 version 15.0.0 Release 15)".
[5] ETSI TS 136 104 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 15.8.0
Release 15)".
[6] ETSI TS 136 141 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 15.8.0 Release 15)".
[7] ETSI TS 145 008 (V15.6.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); GSM/EDGE Radio subsystem link control (3GPP TS 45.008 version 15.6.0 Release 15)".
[8] ETSI EN 301 502 (V12.5.2) (03-2017): "Global System for Mobile communications (GSM); Base
Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of
the Directive 2014/53/EU".
[9] ETSI TS 151 021 (V15.3.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021
version 15.3.0 Release 15)".
[10] ETSI TS 138 141-1 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing; Part 1:
Conducted conformance testing (3GPP TS 38.141-1 version 15.5.0 Release 15)".
[11] ETSI TS 138 101-4 (V15.5.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 4: Performance requirements (3GPP TS 38.101-4 version 15.5.0 Release 15)".
[12] ETSI TS 137 141 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP
TS 37.141 version 15.10.0 Release 15)".
[13] ETSI TS 137 145-1 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1:
conducted conformance testing (3GPP TS 37.145-1 version 15.6.0 Release 15)".
ETSI

---------------------- Page: 9 ----------------------
SIST EN 301 489-50 V2.3.1:2021
 8 ETSI EN 301 489-50 V2.3.1 (2021-03)
[14] ETSI TS 137 145-2 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 2:
radiated conformance testing (3GPP TS 37.145-2 version 15.6.0 Release 15)".
[15] ETSI EN 301 908-20 (V6.3.1) (05-2016): "IMT cellular networks; Harmonised Standard covering
the esse
...

Draft ETSI EN 301 489-50 V2.2.2 (2020-12)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication
Base Station (BS), repeater and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)



Reference
REN/ERM-EMC-407
Keywords
5G, EMC, GSM, harmonised standard, LTE,
MSR, NR, OFDMA, WCDMA, WMAN

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Test conditions . 14
4.1 General . 14
4.2 Arrangements for establishing a communication link . 15
4.2.0 Specification of Channel Number . 15
4.2.1 Arrangements for test signals at the input of transmitters . 15
4.2.2 Arrangements for test signals at the output of transmitters . 15
4.2.3 Arrangements for test signals at the input of receivers . 16
4.2.3.0 General . 16
4.2.3.1 UTRA . 16
4.2.3.2 E-UTRA . 16
4.2.3.3 E-UTRA BS operating in band 46 (LAA) . 16
4.2.3.4 E-UTRA with in band or guard band NB-IoT. 16
4.2.3.5 OFDMA WMAN . 16
4.2.3.6 Standalone NB-IoT . 17
4.2.3.7 GSM/EDGE . 17
4.2.3.8 CDMA . 17
4.2.3.9 MSR . 17
4.2.3.10 NR . 17
4.2.3.10.1 NR BS type 1-C and 1-H . 17
4.2.3.10.2 NR BS type 1-O. 17
4.2.3.10.3 NR BS type 2-O. 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for test signals for repeaters . 17
4.3 Exclusion bands . 18
4.3.0 General . 18
4.3.1 Transmitter exclusion band . 18
4.3.1.0 General . 18
4.3.1.1 OTA type BS for FR1 . 18
4.3.2 Receiver exclusion band . 18
4.3.2.0 General . 18
4.3.2.1 Non-AAS BS, Hybrid AAS BS and NR BS Type 1-C . 18
4.3.2.2 OTA AAS BS and NR BS Type 1-O . 18
4.3.3 Multi-band BS . 19
4.4 Narrow band responses of receivers . 19
4.5 Void . 20
4.6 Test configurations . 20
4.6.1 Emission . 20
4.6.2 Immunity . 20
4.6.3 MSR . 21
5 Performance assessment . 21
5.0 General . 21
5.1 UTRA . 22
5.1.1 BLER on DL . 22
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
5.1.2 BLER on UL . 22
5.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 22
5.2.1 Throughput on DL . 22
5.2.2 Throughput on UL . 22
5.3 OFDMA WMAN . 22
5.3.1 Throughput on DL . 22
5.3.2 Throughput on UL . 22
5.4 NR . 22
5.4.1 Throughput on DL . 22
5.4.2 Throughput on UL . 22
5.5 GSM/EDGE . 23
5.5.1 BER on DL . 23
5.5.1.0 General . 23
5.5.1.1 Assessment of BER using static layer 1 functions . 23
5.5.1.2 Assessment of BER using RXQUAL . 23
5.5.2 BER on UL . 23
5.5.2.0 General . 23
5.5.2.1 Assessment of BER using RXQUAL . 23
5.5.2.2 Assessment of BER using reported BER . 23
5.6 CDMA . 23
5.6.1 FER on DL . 23
5.6.2 FER on UL . 23
5.7 Assessment of RF gain variations of repeaters . 24
5.8 Ancillary equipment . 24
5.9 Equipment classification . 24
6 Performance criteria . 24
6.1 Performance criteria for continuous phenomena . 24
6.1.0 General . 24
6.1.1 Base Stations . 24
6.1.1.1 UTRA . 24
6.1.1.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT . 24
6.1.1.3 Standalone NB-IoT . 25
6.1.1.4 GSM/EDGE . 25
6.1.1.5 CDMA . 26
6.1.1.6 NR . 26
6.1.2 Repeaters . 27
6.2 Performance criteria for transient phenomena . 27
6.2.0 General . 27
6.2.1 Repeaters . 27
7 Requirements . 28
7.1 Emission . 28
7.2 Immunity . 28
7.2.1 General . 28
7.2.2 Modified requirements . 29
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 30
Annex B (informative): Change history . 32
History . 33


ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.15] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
1 Scope
The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Table 1: Cellular Mobile Communication Technologies
Technology
Technology Generation Standard SET ETSI Standard
(Air technology)
GSM 2G/3G IMT-2000 SC (single carrier) ETSI EN 301 502 [8]
(GSM/EDGE) ETSI TS 137 104 [21]

ETSI TS 137 141 [12]
CDMA 2000 3G CDMA2000 (IMT-MC multi ETSI EN 301 526 [i.2]
carrier) ETSI EN 301 908-5 [i.7]
ETSI EN 301 908-7 [i.8]
ETSI EN 301 449 [i.11]
ETSI EN 302 426 [i.12]
UMTS 3G IMT-2000 Direct Spread ETSI TS 125 104 [i.3]
(UTRA, W-CDMA) ETSI TS 125 105 [i.4]
ETSI TS 125 106 [i.5]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA)
ETSI TS 136 141[6]
ETSI TS 136 106 [i.6]
ETSI TS 136 143 [25]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA), AAS
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]

MSR (see note 2) 4G IMT-advanced ETSI TS 137 104 [21]
AAS ETSI TS 137 141 [12]
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]
WMAN 3G IMT-2000 OFDMA ETSI EN 301 908-22 [16]
(OFDMA)

NR
5G IMT-advanced ETSI TS 138 104 [20]
OTA ETSI TS 138 141-1 [10]
ETSI TS 138 141-2 [17]
Standalone NB-IoT 4G IMT-2000 ETSI TS 136 104 [5]
NOTE 1: Including LAA, inband NB-IoT or guard band NB-IoT.
NOTE 2: Combination of technologies GSM, W-CDMA, LTE and NR.

Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS),
combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such
technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.1] is given in Annex A.
ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 125 141 (V15.4.0) (04-2019): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 15.4.0 Release 15)".
[3] ETSI TS 125 142 (V15.0.1) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 15.0.1 Release 15)".
[4] ETSI TS 125 143 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
UTRA repeater conformance testing (3GPP TS 25.143 version 15.0.0 Release 15)".
[5] ETSI TS 136 104 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 15.8.0
Release 15)".
[6] ETSI TS 136 141 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 15.8.0 Release 15)".
[7] ETSI TS 145 008 (V15.6.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); GSM/EDGE Radio subsystem link control (3GPP TS 45.008 version 15.6.0 Release 15)".
[8] ETSI EN 301 502 (V12.5.2) (03-2017): "Global System for Mobile communications (GSM); Base
Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of
the Directive 2014/53/EU".
[9] ETSI TS 151 021 (V15.3.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021
version 15.3.0 Release 15)".
[10] ETSI TS 138 141-1 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing Part 1:
Conducted conformance testing (3GPP TS 38.141-1 version 15.5.0 Release 15)".
[11] ETSI TS 138 101-4 (V15.5.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 4: Performance requirements (3GPP TS 38.101-4 version 15.5.0 Release 15)".
[12] ETSI TS 137 141 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP
TS 37.141 version 15.10.0 Release 15)".
[13] ETSI TS 137 145-1 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1:
conducted conformance testing (3GPP TS 37.145-1 version 15.6.0 Release 15)".
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
[14] ETSI TS 137 145-2 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 2:
radiated conformance testing (3GPP TS 37.145-2 version 15.6.0 Release 15)".
[15] ETSI EN 301 908-20 (V6.3.1) (05-2016): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD
WMAN (Mobile WiMAX™) TDD Base Stations (BS)".
[16] ETSI EN 301 908-22 (V6.1.1) (07-2016): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD
WMAN (Mobile WiMAX™) FDD Base Stations (BS)".
[17] ETSI TS 138 141-2 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing; Part 2:
Radiated conformance testing (3GPP TS 38.141-2 version 15.5.0 Release 15)".
[18] TIA-97 (2014): "Recommended Minimum Performance Standard for cdma2000 Spread Spectrum
Base Stations".
[19] TIA-2000 Series, Revision F (2014): "Introduction to CDMA2000 spread spectrum systems
**Includes TIA-2000.1 (2013), TIA-2000.2 (2014), TIA-2000.3 (2014), TIA-2000.4 (2014), and
TIA-2000.5 **".
[20] ETSI TS 138 104 (V15.9.0) (04-2020): "5G; NR; Base Station (BS) radio transmission and
reception (3GPP TS 38.104 version 15.9.0 Release 15)".
[21] ETSI TS 137 104 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE;
...

SLOVENSKI STANDARD
oSIST prEN 301 489-50 V2.2.2:2021
01-februar-2021
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 50.
del: Posebni pogoji za ponavljalniško (repetitorsko) in pomožno opremo celičnih
komunikacijskih baznih postaj (BS) - Harmonizirani standard za elektromagnetno
združljivost
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
50: Specific conditions for Cellular Communication Base Station (BS), repeater and
ancillary equipment - Harmonised Standard for ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-50 V2.2.2 (2020-12)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN 301 489-50 V2.2.2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021

---------------------- Page: 2 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
Draft ETSI EN 301 489-50 V2.2.2 (2020-12)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication
Base Station (BS), repeater and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility

---------------------- Page: 3 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 2 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)



Reference
REN/ERM-EMC-407
Keywords
5G, EMC, GSM, harmonised standard, LTE,
MSR, NR, OFDMA, WCDMA, WMAN

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 3 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Test conditions . 14
4.1 General . 14
4.2 Arrangements for establishing a communication link . 15
4.2.0 Specification of Channel Number . 15
4.2.1 Arrangements for test signals at the input of transmitters . 15
4.2.2 Arrangements for test signals at the output of transmitters . 15
4.2.3 Arrangements for test signals at the input of receivers . 16
4.2.3.0 General . 16
4.2.3.1 UTRA . 16
4.2.3.2 E-UTRA . 16
4.2.3.3 E-UTRA BS operating in band 46 (LAA) . 16
4.2.3.4 E-UTRA with in band or guard band NB-IoT. 16
4.2.3.5 OFDMA WMAN . 16
4.2.3.6 Standalone NB-IoT . 17
4.2.3.7 GSM/EDGE . 17
4.2.3.8 CDMA . 17
4.2.3.9 MSR . 17
4.2.3.10 NR . 17
4.2.3.10.1 NR BS type 1-C and 1-H . 17
4.2.3.10.2 NR BS type 1-O. 17
4.2.3.10.3 NR BS type 2-O. 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for test signals for repeaters . 17
4.3 Exclusion bands . 18
4.3.0 General . 18
4.3.1 Transmitter exclusion band . 18
4.3.1.0 General . 18
4.3.1.1 OTA type BS for FR1 . 18
4.3.2 Receiver exclusion band . 18
4.3.2.0 General . 18
4.3.2.1 Non-AAS BS, Hybrid AAS BS and NR BS Type 1-C . 18
4.3.2.2 OTA AAS BS and NR BS Type 1-O . 18
4.3.3 Multi-band BS . 19
4.4 Narrow band responses of receivers . 19
4.5 Void . 20
4.6 Test configurations . 20
4.6.1 Emission . 20
4.6.2 Immunity . 20
4.6.3 MSR . 21
5 Performance assessment . 21
5.0 General . 21
5.1 UTRA . 22
5.1.1 BLER on DL . 22
ETSI

---------------------- Page: 5 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 4 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
5.1.2 BLER on UL . 22
5.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 22
5.2.1 Throughput on DL . 22
5.2.2 Throughput on UL . 22
5.3 OFDMA WMAN . 22
5.3.1 Throughput on DL . 22
5.3.2 Throughput on UL . 22
5.4 NR . 22
5.4.1 Throughput on DL . 22
5.4.2 Throughput on UL . 22
5.5 GSM/EDGE . 23
5.5.1 BER on DL . 23
5.5.1.0 General . 23
5.5.1.1 Assessment of BER using static layer 1 functions . 23
5.5.1.2 Assessment of BER using RXQUAL . 23
5.5.2 BER on UL . 23
5.5.2.0 General . 23
5.5.2.1 Assessment of BER using RXQUAL . 23
5.5.2.2 Assessment of BER using reported BER . 23
5.6 CDMA . 23
5.6.1 FER on DL . 23
5.6.2 FER on UL . 23
5.7 Assessment of RF gain variations of repeaters . 24
5.8 Ancillary equipment . 24
5.9 Equipment classification . 24
6 Performance criteria . 24
6.1 Performance criteria for continuous phenomena . 24
6.1.0 General . 24
6.1.1 Base Stations . 24
6.1.1.1 UTRA . 24
6.1.1.2 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT . 24
6.1.1.3 Standalone NB-IoT . 25
6.1.1.4 GSM/EDGE . 25
6.1.1.5 CDMA . 26
6.1.1.6 NR . 26
6.1.2 Repeaters . 27
6.2 Performance criteria for transient phenomena . 27
6.2.0 General . 27
6.2.1 Repeaters . 27
7 Requirements . 28
7.1 Emission . 28
7.2 Immunity . 28
7.2.1 General . 28
7.2.2 Modified requirements . 29
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 30
Annex B (informative): Change history . 32
History . 33


ETSI

---------------------- Page: 6 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 5 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.15] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 6 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
1 Scope
The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Table 1: Cellular Mobile Communication Technologies
Technology
Technology Generation Standard SET ETSI Standard
(Air technology)
GSM 2G/3G IMT-2000 SC (single carrier) ETSI EN 301 502 [8]
(GSM/EDGE) ETSI TS 137 104 [21]

ETSI TS 137 141 [12]
CDMA 2000 3G CDMA2000 (IMT-MC multi ETSI EN 301 526 [i.2]
carrier) ETSI EN 301 908-5 [i.7]
ETSI EN 301 908-7 [i.8]
ETSI EN 301 449 [i.11]
ETSI EN 302 426 [i.12]
UMTS 3G IMT-2000 Direct Spread ETSI TS 125 104 [i.3]
(UTRA, W-CDMA) ETSI TS 125 105 [i.4]
ETSI TS 125 106 [i.5]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA)
ETSI TS 136 141[6]
ETSI TS 136 106 [i.6]
ETSI TS 136 143 [25]
LTE (see note 1) 4G IMT-advanced ETSI TS 136 104 [5]
(E-UTRA), AAS
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]

MSR (see note 2) 4G IMT-advanced ETSI TS 137 104 [21]
AAS ETSI TS 137 141 [12]
ETSI TS 137 114 [31]
ETSI TS 137 145-1 [13]
ETSI TS 137 145-2 [14]
WMAN 3G IMT-2000 OFDMA ETSI EN 301 908-22 [16]
(OFDMA)

NR
5G IMT-advanced ETSI TS 138 104 [20]
OTA ETSI TS 138 141-1 [10]
ETSI TS 138 141-2 [17]
Standalone NB-IoT 4G IMT-2000 ETSI TS 136 104 [5]
NOTE 1: Including LAA, inband NB-IoT or guard band NB-IoT.
NOTE 2: Combination of technologies GSM, W-CDMA, LTE and NR.

Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS),
combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such
technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.1] is given in Annex A.
ETSI

---------------------- Page: 8 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 7 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 125 141 (V15.4.0) (04-2019): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 15.4.0 Release 15)".
[3] ETSI TS 125 142 (V15.0.1) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 15.0.1 Release 15)".
[4] ETSI TS 125 143 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
UTRA repeater conformance testing (3GPP TS 25.143 version 15.0.0 Release 15)".
[5] ETSI TS 136 104 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 15.8.0
Release 15)".
[6] ETSI TS 136 141 (V15.8.0) (10-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 15.8.0 Release 15)".
[7] ETSI TS 145 008 (V15.6.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); GSM/EDGE Radio subsystem link control (3GPP TS 45.008 version 15.6.0 Release 15)".
[8] ETSI EN 301 502 (V12.5.2) (03-2017): "Global System for Mobile communications (GSM); Base
Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of
the Directive 2014/53/EU".
[9] ETSI TS 151 021 (V15.3.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021
version 15.3.0 Release 15)".
[10] ETSI TS 138 141-1 (V15.5.0) (04-2020): "5G; NR; Base Station (BS) conformance testing Part 1:
Conducted conformance testing (3GPP TS 38.141-1 version 15.5.0 Release 15)".
[11] ETSI TS 138 101-4 (V15.5.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 4: Performance requirements (3GPP TS 38.101-4 version 15.5.0 Release 15)".
[12] ETSI TS 137 141 (V15.10.0) (04-2020): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA
and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP
TS 37.141 version 15.10.0 Release 15)".
[13] ETSI TS 137 145-1 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1:
conducted conformance testing (3GPP TS 37.145-1 version 15.6.0 Release 15)".
ETSI

---------------------- Page: 9 ----------------------
oSIST prEN 301 489-50 V2.2.2:2021
 8 Draft ETSI EN 301 489-50 V2.2.2 (2020-12)
[14] ETSI TS 137 145-2 (V15.6.0) (01-2020): "Universal Mobile Telecommunications System
(UMTS); LTE; Active Antenna System (AAS) Base Station (BS) conformance t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.