SIST EN 4652-220:2017

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]YRGLuft- und Raumfahrt - HF-Steckverbinder, koaxial - Teil 220: Typ 2, crimpbar, TNC-Schnittstelle, freier Steckverbinder, gerade Ausführung - ProduktnormSérie aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 220: Type 2, interface TNC - Version à sertir - Fiche droite - Norme de produitAerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard49.060Aerospace electric equipment and systems33.120.305)RF connectorsICS:Ta slovenski standard je istoveten z:EN 4652-220:2017SIST EN 4652-220:2017en,fr,de01-oktober-2017SIST EN 4652-220:2017SLOVENSKI
STANDARD



SIST EN 4652-220:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-220
August
t r s y ICS
v {ä r x r English Version
Aerospace series æ Connectorsá coaxialá radio frequency æ Part
t t rã Type
tá TNC interface æ Crimp version æ Straight plug æ Product standard Série aérospatiale æ Connecteurs coaxiaux pour radio fréquences æ Partie
t t rã Type
tá interface TNC æ Version à sertir æ Fiche droite æ Norme de produit
Luftæ und Raumfahrt æ Koaxiale HochfrequenzæSteckverbinder æ Teil
t t rã Typ
tá TNCæSchnittstelleá Crimpverbindung æ freier Steckverbinderá gerade æ Produktnorm This European Standard was approved by CEN on
s t June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x w tæ t t rã t r s y ESIST EN 4652-220:2017



EN 4652-220:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Required characteristics . 4 4 For stripping . 8 5 Test methods . 9 6 Quality assurance . 11 7 Designation . 12 8 Marking . 12 9 Packaging . 12 10 Storage . 12
SIST EN 4652-220:2017



EN 4652-220:2017 (E) 3 European foreword This document (EN 4652-220:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4652-220:2017



EN 4652-220:2017 (E) 4 1 Scope This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial straight plugs − 50 ohms. These connectors are foreseen for light weight coaxial cables; so, appropriate sealing have to be achieved. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2424, Aerospace series — Marking of aerospace products EN 2591-1), Aerospace series — Cables, electrical, aircraft use — Test methods
EN 2812, Aerospace series — Stripping of electric cables EN 3155-001, Aerospace series — Electrical contacts used in elements of connections — Part 001: Technical specification
EN 4652-001, Aerospace series — Connectors coaxial radio frequency — Part 001: Technical specification EN 4652-222, Aerospace series — Connectors coaxial radio frequency — Part 222: Type 2, TNC interface — Square flange receptacle — Product standard 2) EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products TR 6058, Aerospace series — Cable code identification list 3) 3 Required characteristics  The connection technology shall comply to all required tests described in Clause 5.  All interface shall comply to EN 4652-001.  Holes for lockwire shall exist in case of no self-locking device on the product.  Water ingress resistance is required in mated conditions for all cable groups.  Water ingress resistance is also required in unmated conditions for cable group A.
1) All parts quoted in this standard. 2) Published as ASD-STAN Prestandard at the date of publication of this standard. (http://www.asd-stan.org/) 3) Published as ASD-STAN Technical Report at the date of publication of this standard. (http://www.asd-stan.org/) SIST EN 4652-220:2017



EN 4652-220:2017 (E) 5 3.1 Configuration, dimension and mass 3.1.1 TNC, straight plug See Figure 1 and Table 1. Dimensions in millimetres
Key 1 3 holes Ø 0,95 × 120° 2 Protective cap 3 Hex 14 / flats 4 Marking axis 5 3 holes Ø 0,95 Marking: See Clause 8. Figure 1 — TNC, straight plug Table 1 — TNC, straight plug dimensions and mass Cable code (see TR 6058) A
max. B
max. ØC ØD ØE ØF Mass g WM 47 37,5 11,45 4,2 1,15 3 20,63 WZ 42 37,5 11,45 3,7 1,05 2,55 21,10 WD 49,7 46,5 13,95 8,4 2,5 6,3 33,25 WN 49,7 46,5 13,95 8,4 2,5 6,3 33,25
3.2 Materials and finish Center contact (front active part) . : copper alloy gold plated over nickel undercoat Ferrule (if existing) . : copper alloy Insulators . : PTFE Seals
................................................................................................. : Silicone rubber or fluoride SIST EN 4
...