Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)

This International Standard specifies methods for the determination of the B-transformation time of phenolic resins at a specified temperature and under specified conditions on a heated test plate. Two methods are described, each with a different test plate: Method A - plate with depressions in the form of segments of spheres; Method B - flat plate without depressions.

Kunststoffe - Phenolharze - Bestimmung der Reaktivität auf einer B-Zeit-Prüfplatte (ISO 8987:2005)

Diese Internationale Norm legt Verfahren für die Bestimmung der B-Zeit von Phenolharzen bei festgelegter Temperatur unter festgelegten Bedingungen auf einer beheizten Prüfplatte fest. Zwei Verfahren werden beschrieben, jedes mit einer anderen Prüfplatte:
Verfahren A: Prüfplatte mit Vertiefungen in der Form von Kugelsegmenten;
Verfahren B: flache Prüfplatte ohne Vertiefungen.

Plastiques - Résines phénoliques - Méthodes d'évaluation de la réactivité sur plaque d'essai de transformation au stade B (ISO 8987:2005)

L'ISO 8987:2005 spécifie des méthodes de détermination du temps de transformation au stade B des résines phénoliques, à une température et dans des conditions spécifiées, sur plaque d'essai chauffée.
Deux méthodes sont décrites, chaque méthode étant spécifique à un type de plaque:
Méthode A: plaque avec des empreintes en forme de segment de sphères;Méthode B: plaque plate sans dépressions.

Polimerni materiali – Fenolne smole – Določanje reaktivnosti na preskusni plošči za prehodno stanje B (B-čas) (ISO 8987:2005)

General Information

Status
Published
Publication Date
31-Dec-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2006
Due Date
01-Jan-2006
Completion Date
01-Jan-2006

Relations

Buy Standard

Standard
EN ISO 8987:2006
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8987:2006
01-januar-2006
1DGRPHãþD
SIST EN ISO 8987:1999
3ROLPHUQLPDWHULDOL±)HQROQHVPROH±'RORþDQMHUHDNWLYQRVWLQDSUHVNXVQLSORãþL
]DSUHKRGQRVWDQMH% %þDV  ,62
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
(ISO 8987:2005)
Kunststoffe - Phenolharze - Bestimmung der Reaktivität auf einer B-Zeit-Prüfplatte (ISO
8987:2005)
Plastiques - Résines phénoliques - Méthodes d'évaluation de la réactivité sur plaque
d'essai de transformation au stade B (ISO 8987:2005)
Ta slovenski standard je istoveten z: EN ISO 8987:2005
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 8987:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8987:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 8987:2006
EUROPEAN STANDARD
EN ISO 8987
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 83.080.10 Supersedes EN ISO 8987:1998
English Version
Plastics - Phenolic resins - Determination of reactivity on a B-
transformation test plate (ISO 8987:2005)
Plastiques - Résines phénoliques - Méthodes d'évaluation Kunststoffe - Phenolharze - Bestimmung der Reaktivität auf
de la réactivité sur plaque d'essai de transformation au einer B-Zeit-Prüfplatte (ISO 8987:2005)
stade B (ISO 8987:2005)
This European Standard was approved by CEN on 29 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8987:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8987:2006

EN ISO 8987:2005 (E)





Foreword


This document (EN ISO 8987:2005) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2006, and conflicting national
standards shall be withdrawn at the latest by April 2006.

This document supersedes EN ISO 8987:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 8987:2005 has been approved by CEN as EN ISO 8987:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8987:2006

INTERNATIONAL ISO
STANDARD 8987
Third edition
2005-10-01


Plastics — Phenolic resins —
Determination of reactivity on a
B-transformation test plate
Plastiques — Résines phénoliques — Méthodes d'évaluation de la
réactivité sur plaque d'essai de transformation au stade B





Reference number
ISO 8987:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 8987:2006
ISO 8987:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 8987:2006
ISO 8987:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft Intern
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.