Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments

IEC 61000-6-3:2020 is a generic EMC emission standard applicable only if no relevant dedicated product or product family EMC emission standard has been published. This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use at residential (see 3.1.14) locations. This part of IEC 61000 also applies to electrical and electronic equipment intended for use at other locations that do not fall within the scope of IEC 61000-6-8 or IEC 61000-6-4. The intention is that all equipment used in the residential, commercial and light-industrial environments are covered by IEC 61000-6-3 or IEC 61000-6-8. If there is any doubt the requirements in IEC 61000-6-3 apply. The conducted and radiated emission requirements in the frequency range up to 400 GHz are considered essential and have been selected to provide an adequate level of protection of radio reception in the defined electromagnetic environment. Not all disturbance phenomena have been included for testing purposes but only those considered relevant for the equipment intended to operate within the locations included within this document. The emission requirements in this document are not intended to be applicable to the intentional transmissions and their harmonics from a radio transmitter as defined by the ITU. This third edition cancels and replaces the second edition published in 2006 and its Amendment 1:2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) alternative method for measuring conducted emissions on DC ports;
b) limits and requirements applicable only to equipment intended to be used in residential locations;
c) more stringent limits for DC power ports.
NOTE 1 Safety considerations are not covered by this document.
NOTE 2 In special cases, situations will arise where the levels specified in this document will not offer adequate protection; for example where a sensitive receiver is used in close proximity to an equipment. In these instances, special mitigation measures can be employed. NOTE 3 Disturbances generated in fault conditions of equipment are not covered by this document.
NOTE 4 As the requirements in this document are more stringent or equivalent to those requirements in IEC 61000-6-4 and IEC 61000-6-8, equipment fulfilling the requirements of this document comply with the requirements of IEC 61000-6-4 and IEC 61000-6-8.

Elektromagnetische Verträglichkeit (EMV) - Teil 6-3: Fachgrundnormen - Störaussendung für Wohnbereich, Geschäfts- und Gewerbebereiche sowie Kleinbetriebe

Compatibilité électromagnétique (CEM) - Partie 6-3: Normes génériques - Norme sur l'émission relative aux appareils utilisés dans les environnements résidentiels

IEC 61000-6-3:2020 est une norme d’émissions CEM générique relative aux émissions eapplique uniquement si aucune norme CEM d’émission pertinente dédiée à un produit ou une famille de produits n’a été publiée. La présente partie de l'IEC 61000 concernant les exigences d'émissions s'applique aux appareils électriques et électroniques destinés à être utilisés dans des environnements résidentiels (voir 3.1.14). La présente partie de l'IEC 61000 s'applique également aux appareils électriques et électroniques destinés à être utilisés dans des environnements n’entrant pas dans le domaine d'application de l’IEC 61000-6-8 ou de l’IEC 61000-6-4. L'objectif est que tous les appareils utilisés dans les environnements résidentiels, commerciaux et de l'industrie légère soient couverts par l’IEC 61000-6-3 ou l’IEC 61000-6-8. Les exigences dans l’IEC 61000-6-3 s'appliquent en présence du moindre doute. Les exigences en matière d’émissions conduites et rayonnées dans la plage de fréquences jusqu'à 400 GHz sont considérées comme essentielles et ont été choisies de manière à assurer un niveau adéquat de protection de la réception radioélectrique dans l'environnement électromagnétique défini. Tous les phénomènes de perturbation n'ont pas été inclus pour les besoins de l'essai. Seuls l'ont été ceux considérés comme pertinents pour les appareils destinés à fonctionner dans l'environnement couvert par le présent document. Les exigences du présent document relatives à l’émission ne sont pas destinées à s'appliquer aux transmissions intentionnelles et à leurs harmoniques depuis un émetteur radio tel que défini par l'UIT. Cette troisième édition annule et remplace la deuxième édition parue en 2006 et l'Amendement 1:2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) méthode alternative de mesurage des émissions conduites sur les accès en courant continu;
b) limites et exigences applicables uniquement sur les matériels destinés à être utilisés dans des environnements résidentiels;
c) limites plus strictes en ce qui concerne les accès d'alimentation en courant continu.
NOTE 1 Le présent document ne traite pas des aspects liés à la sécurité.
NOTE 2 Dans certains cas particuliers, des situations sont susceptibles de se produire, pour lesquelles les niveaux spécifiés dans le présent document n’offrent pas le niveau de protection adéquat; par exemple lorsqu'un récepteur sensible est utilisé très proche d'un appareil. Dans de tels cas, des mesures particulières d'atténuation peuvent être employées.
NOTE 3 Les perturbations générées dans les conditions de défaut de l'appareil ne sont pas couvertes par le présent document.
NOTE 4 Les exigences du présent document étant plus sévères ou équivalentes à celles de l'IEC 61000-6-4 et de l’IEC 61000-6-8, les appareils qui satisfont aux exigences du présent document satisfont également à celles de l'IEC 61000-6-4 et de l’IEC 61000-6-8.

Elektromagnetna združljivost (EMC) - 6-3. del: Osnovni standardi - Standard oddajanja motenj za opremo v stanovanjskih okoljih

General Information

Status
Published
Publication Date
03-May-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Apr-2021
Due Date
11-Jun-2021
Completion Date
04-May-2021

Relations

Buy Standard

Standard
EN IEC 61000-6-3:2021 - BARVE
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61000-6-3:2021
01-junij-2021
Nadomešča:
SIST EN 61000-6-3:2007
SIST EN 61000-6-3:2007/A1:2011
SIST EN 61000-6-3:2007/A1:2011/AC:2012
Elektromagnetna združljivost (EMC) - 6-3. del: Osnovni standardi - Standard
oddajanja motenj za opremo v stanovanjskih okoljih
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard
for equipment in residential environments
Elektromagnetische Verträglichkeit (EMV) - Teil 6-3: Fachgrundnormen -
Störaussendung für Wohnbereich, Geschäfts- und Gewerbebereiche sowie Kleinbetriebe
Compatibilité électromagnétique (CEM) - Partie 6-3: Normes génériques - Norme sur
l'émission relative aux appareils utilisés dans les environnements résidentiels
Ta slovenski standard je istoveten z: EN IEC 61000-6-3:2021
ICS:
33.100.10 Emisija Emission
SIST EN IEC 61000-6-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61000-6-3:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61000-6-3:2021

EUROPEAN STANDARD EN IEC 61000-6-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2021
ICS 33.100.10 Supersedes EN 61000-6-3:2007 and all of its
amendments and corrigenda (if any)
English Version
Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for equipment in residential
environments
(IEC 61000-6-3:2020)
Compatibilité électromagnétique (CEM) - Partie 6-3:
Elektromagnetische Verträglichkeit (EMV) - Teil 6-3:
Normes génériques - Norme sur l'émission relative aux Fachgrundnormen - Störaussendung für Wohnbereich,
appareils utilisés dans les environnements résidentiels Geschäfts- und Gewerbebereiche sowie Kleinbetriebe
(IEC 61000-6-3:2020) (IEC 61000-6-3:2020)
This European Standard was approved by CENELEC on 2020-09-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61000-6-3:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61000-6-3:2021
EN IEC 61000-6-3:2021 (E)
European foreword
The text of document CIS/H/400/CDV, future edition 3 of IEC 61000-6-3, prepared by CISPR SC H
“Limits for the protection of radio services” of CISPR “International special committee on radio
interference” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61000-6-3:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-26
document have to be withdrawn
This document supersedes EN 61000-6-3:2007 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61000-6-3:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61000-6-1 NOTE Harmonized as EN IEC 61000-6-1
IEC 61000-6-2:2016 NOTE Harmonized as EN IEC 61000-6-2:2019 (not modified).
IEC 61000-6-4 NOTE Harmonized as EN IEC 61000-6-4.
IEC 61000-6-8 NOTE Harmonized as EN IEC 61000-6-8.
IEC 61158-1:2019 NOTE Harmonized as
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.