Railway applications - Wheel/Rail friction management - Part 2-2: Properties and Characteristics - Top of Rail materials

This Technical Specification specifies the requirements of materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This Technical Specification does not deal with adhesion materials, for example:
- sand
- adhesion enhancers

Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2: Eigenschaften und Merkmale - Behandlung der Schienenoberfläche

Dieses Dokument legt die Anforderungen an Materialien für die Anwendung auf der Kontaktfläche zwischen der Radlauffläche und der Fahrfläche der Schiene (aktive Kontaktfläche) fest. Sie kann direkt oder indirekt auf die Radlauffläche oder die Schiene angewendet werden.
Es beschreibt die erforderlichen Informationen für die meisten Genehmigungsverfahren, das Prüfverfahren und die regelmäßige Kontrolle/Überwachung des Materials.
Dieses Dokument behandelt keine kraftschlusserhöhenden Materialien wie etwa:
- Sand;
- Haftverstärker.

Applications ferroviaires - Gestion de la friction rail/roue - Partie 2-2 : Propriétés et caractéristiques - Matériaux de la surface du rail

Le présent document spécifie les exigences applicables aux lubrifiants destinés à être appliqués sur l'interface entre la bande de roulement de la roue et la tête de rail (interface active). Ils peuvent être appliqués directement ou indirectement, sur la bande de roulement ou sur le rail.
Il précise également les informations nécessaires à la plupart des procédures de validation, la méthode d'essai et les tâches de contrôle/surveillance de routine du lubrifiant.
Le présent document n'aborde pas les matériaux assurant l'adhérence, notamment :
-   le sable ;
-   les amplificateurs d'adhérence.

Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in karakteristike - Materiali za zgornjo površino tirnic

General Information

Status
Withdrawn
Public Enquiry End Date
21-Oct-2020
Publication Date
31-Jan-2021
Withdrawal Date
05-Nov-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Nov-2023
Due Date
29-Nov-2023
Completion Date
06-Nov-2023

Relations

Buy Standard

Technical specification
TS CEN/TS 15427-2-2:2021 - BARVE
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 15427-2-2:2020 - BARVE
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15427-2-2:2021
01-marec-2021
Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in
karakteristike - Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 2-2: Properties and
Characteristics - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2:
Eigenschaften und Merkmale - Behandlung der Schienenoberfläche
Applications ferroviaires - Gestion de la friction rail/roue - Partie 2-2 : Propriétés et
caractéristiques - Matériaux de la surface du rail
Ta slovenski standard je istoveten z: CEN/TS 15427-2-2:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
SIST-TS CEN/TS 15427-2-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-2-2:2021

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-2-2:2021


CEN/TS 15427-2-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

January 2021
TECHNISCHE SPEZIFIKATION
ICS 45.080; 45.120
English Version

Railway applications - Wheel/Rail friction management -
Part 2-2: Properties and Characteristics - Top of Rail
materials
Applications ferroviaires - Gestion des frottements Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 2-2 : Propriétés et caractéristiques - Rad und Schiene - Teil 2-2: Eigenschaften und
Lubrifiants de tête de rail Merkmale - Behandlung der Schienenoberfläche
This Technical Specification (CEN/TS) was approved by CEN on 23 November 2020 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-2-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-2-2:2021
CEN/TS 15427-2-2:2021
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Material requirements . 10
5 General requirements . 10
5.1 Introduction . 10
5.2 Product specification . 10
5.3 Technical file . 11
6 Control and monitoring of produc
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 15427-2-2:2020
01-oktober-2020
Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in
karakteristike - Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 2-2: Properties and
Characteristics - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2:
Eigenschaften und Merkmale - Behandlung der Schienenoberfläche
Applications ferroviaires - Gestion de la friction rail/roue - Partie 2-2 : Propriétés et
caractéristiques - Matériaux de la surface du rail
Ta slovenski standard je istoveten z: FprCEN/TS 15427-2-2
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
kSIST-TS FprCEN/TS 15427-2-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 15427-2-2:2020

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 15427-2-2:2020


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 15427-2-2
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

July 2020
ICS 45.080; 45.120
English Version

Railway applications - Wheel/Rail friction management -
Part 2-2: Properties and Characteristics - Top of Rail
materials
Applications ferroviaires - Gestion de la friction Bahnanwendungen - Reibungsmanagement zwischen
rail/roue - Partie 2-2 : Propriétés et caractéristiques - Rad und Schiene - Teil 2-2: Eigenschaften und
Matériaux de la surface du rail Merkmale - Behandlung der Schienenoberfläche


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 256.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 15427-2-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 15427-2-2:2020
FprCEN/TS 15427-2-2:2020
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Material requirements . 10
5 General requirements . 10
5.1 Introduction . 10
5.2 Product specification . 10
5.3 Technical file . 11
6 Control and monitoring of product . 11
6.1 Manufacturing process . 11
6.2 Composition of material . 11
6.3 Routine tests .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.