Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2016)

IEC 61162-1:2010(E) contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. Is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. The main changes with respect to the previous edition are listed below:  - certain sentences have been removed as they are not used by other standards prepared by technical committee 80;  - new sentences have been added; corrections have been made to certain sentences (ABK, BBM, DOR, FIR, SSD, TUT, and VTG);  - new fields have been added to certain sentences;  - three additional tests have been added to Annex B.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger

Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiples

La CEI 61162-1:2010 contient les exigences pour la communication des données entre les instruments maritimes électroniques, les équipements de navigation et de radiocommunications lorsqu'ils sont interconnectés via un système approprié. La présente partie de la CEI 61162 est destinée à supporter l'émission unidirectionnelle de données série entre un émetteur unique et un ou plusieurs récepteurs. Ces données sont au format ASCII imprimable et peuvent inclure des informations telles que la position, la vitesse, la profondeur, l'allocation de fréquences, etc. Les messages types peuvent être de longueur comprise entre environ 11 et 79 caractères au maximum et nécessitent généralement une émission pas plus rapidement qu'un seul message à la seconde. Les définitions électriques de la présente norme ne sont pas destinées à gérer les applications à large bande passante comme les radars ou l'imagerie vidéo, ou encore les bases de données intensives et les applications de transfert de fichiers. En l'absence de disposition garantissant l'émission des messages et compte tenu de la capacité limitée de vérification des erreurs, il convient que la présente norme soit utilisée avec précaution dans toutes les applications de sécurité.

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni vmesniki - 1. del: Enosmerna komunikacija: en govorec - več poslušalcev (IEC 61162-1:2016)

Standard IEC 61162-1:2010(E) vsebuje zahteve za podatkovno komunikacijo med pomorskimi elektronskimi instrumenti, navigacijsko in radiokomunikacijsko opremo ob povezavi z ustreznim sistemom. Namenjen je podpori enosmernega prenosa podatkov od enega govorca do enega ali več poslušalcev. Ti podatki so v natisljivi kodi ASCII in lahko vključujejo informacije, kot so položaj, hitrost, globina, dodelitev frekvenc, itd. Tipična sporočila so lahko dolga 11–79 znakov in na splošno ne zahtevajo prenosa, hitrejšega od prenosa enega sporočila na sekundo. Za aplikacije, pri katerih je potreben hitrejši prenos, je priporočljiv sklic na standard IEC 61162-2. Spodaj so navedene glavne spremembe glede na predhodno različico:  – nekateri stavki so bili odstranjeni, ker niso uporabljeni v drugih standardih, ki jih je pripravil tehnični odbor 80; – dodani so bili novi stavki; določeni stavki so bili popravljeni (ABK, BBM, DOR, FIR, SSD, TUT in VTG); – nekaterim stavkom so bila dodana nova polja; – dodatku B so dodani trije dodatni preskusi.

General Information

Status
Published
Publication Date
08-Jan-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Jan-2017
Due Date
11-Mar-2017
Completion Date
09-Jan-2017

Relations

Buy Standard

Standard
EN 61162-1:2017 - BARVE
English language
179 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'LJLWDOQLNavigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere DatenempfängerMatériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiplesMaritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2016)47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 61162-1:2016SIST EN 61162-1:2017en01-februar-2017SIST EN 61162-1:2017SLOVENSKI
STANDARDSIST EN 61162-1:20111DGRPHãþD



SIST EN 61162-1:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61162-1
December 2016 ICS 47.020.70
Supersedes
EN 61162-1:2011
English Version
Maritime navigation and radiocommunication equipment and systems - Digital interfaces -
Part 1: Single talker and multiple listeners (IEC 61162-1:2016)
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiples (IEC 61162-1:2016)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen -
Teil 1: Ein Datensender und mehrere Datenempfänger (IEC 61162-1:2016) This European Standard was approved by CENELEC on 2016-10-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61162-1:2016 E SIST EN 61162-1:2017



EN 61162-1:2016 2 European foreword The text of document 80/799/FDIS, future edition 5 of IEC 61162-1, prepared by IEC/TC 80 "Maritime navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61162-1:2016. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-05 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-10-05
This document supersedes EN 61162-1:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61162-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61023 NOTE Harmonized as EN 61023. IEC 61097-1 NOTE Harmonized as EN 61097-1. IEC 61108-1 NOTE Harmonized as EN 61108-1. IEC 61108-2 NOTE Harmonized as EN 61108-2. IEC 61108-3 NOTE Harmonized as EN 61108-3. IEC 61108-4 NOTE Harmonized as EN 61108-4. IEC 61993-2 NOTE Harmonized as EN 61993-2. IEC 61996-1 NOTE Harmonized as EN 61996-1. IEC 61996-2 NOTE Harmonized as EN 61996-2. IEC 62065 NOTE Harmonized as EN 62065. IEC 62252 NOTE Harmonized as EN 62252. IEC 62287-1 NOTE Harmonized as EN 62287-1. SIST EN 61162-1:2017



EN 61162-1:2016 3 IEC 62287-2 NOTE Harmonized as EN 62287-2. IEC 62288 NOTE Harmonized as EN 62288. IEC 62320-1 NOTE Harmonized as EN 62320-1. IEC 62320-2 NOTE Harmonized as EN 62320-2. IEC 62320-3 NOTE Harmonized as EN 62320-3. IEC 62388 NOTE Harmonized as EN 62388. ISO 9875 NOTE Harmonized as EN ISO 9875. ISO 11606 NOTE Harmonized as EN ISO 11606. SIST EN 61162-1:2017



EN 61162-1:2016 4 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60945 2002
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results EN 60945 2002
IEC 61097-6 -
Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - -
IEC 61108 series
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) EN 61108 series
IEC 61162 series
Maritime navigation and radiocommunication equipment and systems - Digital interfaces EN 61162 series
IEC 61162-2 1998
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission EN 61162-2 1998
IEC 61174 -
Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results EN 61174 -
SIST EN 61162-1:2017



EN 61162-1:2016 5 Publication Year Title EN/HD Year IEC 61924-2 2012
Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results EN 61924-2 2013
IEC 61996 series
Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) EN 61996 series
ISO/IEC 8859 series
Information technology - 8-bit single-byte coded graphic character sets - - ISO/IEC 8859-1 1998
Information technology - 8-bit single-byte coded graphic character sets - Part-1: Latin alphabet No. 1 - -
ISO/IEC 10646 -
Information technology - Universal Coded Character Set (UCS) - -
ITU-R Recommendation M.493 -
Digital selective-calling system for use in the maritime mobile service - -
ITU-R Recommendation M.625 -
Direct-printing telegraph equipment employing automatic identification in the maritime mobile service - -
ITU-R Recommendation M.821 -
Optional expansion of the digital selective-calling system for use in the maritime mobile service - -
ITU-R Recommendation M.1084 -
Interim solutions for improved efficiency in the use of the band 156-174 MHz by stations in the maritime mobile service - -
ITU-R Recommendation M.1371 -
Technical characteristics for an automatic identification system using time-division multiple access in the VHF maritime mobile band - -
ITU-T Recommendation X.27/V.11 1996 Electrical characteristics for balanced double-current interchange circuits operating at data signalling rates up to 10 Mbit/s - -
IMO 908E -
International SafetyNET Manual - -
IMO 951E -
NAVTEX Manual - -
IMO MSC.252(83) -
Performance Standards for Integrated Navigation Systems (INS) - -
IMO MSC.302(87) -
Performance standards for Bridge Alert Management (BAM) - -
SIST EN 61162-1:2017



SIST EN 61162-1:2017



IEC 61162-1 Edition 5.0 2016-08 INTERNATIONAL STANDARD
Maritime navigation and radiocommunication equipment and systems – Digital interfaces –
Part 1: Single talker and multiple listeners
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 47.020.70
ISBN 978-2-8322-3594-2
® Registered trademark of the International Electrotechnical Commission ®
Warning! Make sure that you obtained this publication from an authorized distributor. SIST EN 61162-1:2017 colourinside



– 2 – IEC 61162-1:2016  IEC 2016
CONTENTS FOREWORD .8 INTRODUCTION . 10 1 Scope . 11 2 Normative references . 11 3 Terms and definitions . 13 3.1 General . 13 3.2 Terms and definitions . 13 4 Manufacturer's documentation . 13 5 Hardware specification . 13 5.1 General . 13 5.2 Interconnecting wire . 13 5.3 Conductor definitions . 13 5.4 Electrical connections/shield requirements . 14 5.5 Connector . 14 5.6 Electrical signal characteristics . 14 5.6.1 General . 14 5.6.2 Signal state definitions . 14 5.6.3 Talker drive circuits . 14 5.6.4 Listener receive circuits . 14 5.6.5 Electrical isolation . 15 5.6.6 Maximum voltage on bus . 15 6 Data transmission . 15 7 Data format protocol . 16 7.1 Characters . 16 7.1.1 General . 16 7.1.2 Reserved characters . 16 7.1.3 Valid characters . 16 7.1.4 Undefined characters . 16 7.1.5 Character symbols . 16 7.2 Fields . 16 7.2.1 String . 16 7.2.2 Address field . 16 7.2.3 Data fields . 17 7.2.4 Checksum field . 18 7.2.5 Sequential message identifier field . 18 7.3 Sentences. 19 7.3.1 General structure . 19 7.3.2 Description of approved sentences . 19 7.3.3 Parametric sentences . 20 7.3.4 Encapsulation sentences . 21 7.3.5 Query sentences . 23 7.3.6 Proprietary sentences . 23 7.3.7 Command sentences . 24 7.3.8 Valid sentences . 25 7.3.9 Multi-sentence messages . 25 SIST EN 61162-1:2017



IEC 61162-1:2016  IEC 2016 – 3 –
7.3.10 Sentence transmission timing . 25 7.3.11 Additions to approved sentences . 25 7.4 Error detection and handling . 26 7.5 Handling of deprecated sentences. 26 8 Data content . 26 8.1 Character definitions . 26 8.2 Field definitions . 28 8.3 Approved sentences . 32 8.3.1 General format . 32 8.3.2 AAM – Waypoint arrival alarm . 32 8.3.3 ABK – AIS addressed and binary broadcast acknowledgement . 32 8.3.4 ABM – AIS addressed binary and safety related message . 33 8.3.5 ACA – AIS channel assignment message . 34 8.3.6 ACK – Acknowledge alarm . 36 8.3.7 ACN – Alert command . 36 8.3.8 ACS – AIS channel management information source . 37 8.3.9 AIR – AIS interrogation request . 37 8.3.10 AKD – Acknowledge detail alarm condition . 38 8.3.11 ALA – Report detailed alarm condition . 39 8.3.12 ALC – Cyclic alert list . 40 8.3.13 ALF – Alert sentence . 41 8.3.14 ALR – Set alarm state . 43 8.3.15 APB – Heading/track controller (autopilot) sentence B . 43 8.3.16 ARC – Alert command refused . 44 8.3.17 BBM – AIS broadcast binary message . 45 8.3.18 BEC – Bearing and distance to waypoint – Dead reckoning . 46 8.3.19 BOD – Bearing origin to destination . 46 8.3.20 BWC – Bearing and distance to waypoint – Great circle . 46 8.3.21 BWR – Bearing and distance to waypoint – Rhumb line . 46 8.3.22 BWW – Bearing waypoint to waypoint . 47 8.3.23 CUR – Water current layer – Multi-layer water current data . 47 8.3.24 DBT – Depth below transducer . 48 8.3.25 DDC – Display dimming control . 48 8.3.26 DOR – Door status detection . 49 8.3.27 DPT – Depth . 50 8.3.28 DSC – Digital selective calling information. 50 8.3.29 DSE – Expanded digital selective calling . 51 8.3.30 DTM – Datum reference . 51 8.3.31 EPV – Command or report equipment property value . 52 8.3.32 ETL – Engine telegraph operation status . 54 8.3.33 EVE – General event message . 55 8.3.34 FIR – Fire detection . 55 8.3.35 FSI – Frequency set information . 56 8.3.36 GBS – GNSS satellite fault detection . 57 8.3.37 GEN – Generic binary information . 58 8.3.38 GFA – GNSS fix accuracy and integrity . 59 8.3.39 GGA – Global positioning system (GPS) fix data . 60 8.3.40 GLL – Geographic position – Latitude/longitude . 61 SIST EN 61162-1:2017



– 4 – IEC 61162-1:2016  IEC 2016
8.3.41 GNS – GNSS fix data . 61 8.3.42 GRS – GNSS range residuals . 64 8.3.43 GSA – GNSS DOP and active satellites . 65 8.3.44 GST – GNSS pseudorange noise statistics . 67 8.3.45 GSV – GNSS satellites in view . 68 8.3.46 HBT – Heartbeat supervision sentence . 69 8.3.47 HCR – Heading correction report . 70 8.3.48 HDG – Heading, deviation and variation . 70 8.3.49 HDT – Heading true . 71 8.3.50 HMR – Heading monitor receive . 71 8.3.51 HMS – Heading monitor set . 72 8.3.52 HRM – heel angle, roll period and roll amplitude measurement device . 72 8.3.53 HSC – Heading steering command . 73 8.3.54 HSS – Hull stress surveillance systems . 73 8.3.55 HTC – Heading/track control command; HTD – Heading /track control data . 73 8.3.56 LR1 – AIS long-range reply sentence 1 . 75 8.3.57 LR2 – AIS long-range reply sentence 2 . 75 8.3.58 LR3 – AIS long-range reply sentence 3 . 76 8.3.59 LRF – AIS long-range function . 76 8.3.60 LRI – AIS long-range interrogation . 77 8.3.61 MOB – Man over board notification . 78 8.3.62 MSK – MSK receiver interface . 80 8.3.63 MSS – MSK receiver signal status . 80 8.3.64 MTW – Water temperature . 80 8.3.65 MWD – Wind direction and speed . 80 8.3.66 MWV – Wind speed and angle . 81 8.3.67 NAK – Negative acknowledgement . 81 8.3.68 NRM – NAVTEX receiver mask . 82 8.3.69 NRX – NAVTEX received message . 83 8.3.70 NSR – Navigation status report . 85 8.3.71 OSD – Own ship data. 86 8.3.72 POS – Device position and ship dimensions report or configuration command . 87 8.3.73 PRC – Propulsion remote control status . 88 8.3.74 RLM – Return link message . 89 8.3.75 RMA – Recommended minimum specific LORAN-C data . 90 8.3.76 RMB – Recommended minimum navigation information . 90 8.3.77 RMC – Recommended minimum specific GNSS data . 91 8.3.78 ROR – Rudder order status . 92 8.3.79 ROT – Rate of turn. 93 8.3.80 RRT – Report route transfer . 93 8.3.81 RPM – Revolutions . 94 8.3.82 RSA – Rudder sensor angle . 94 8.3.83 RSD – Radar system data . 94 8.3.84 RTE – Routes . 95 8.3.85 SFI – Scanning frequency information . 96 8.3.86 SMI – SafetyNET Message, All Ships/NavArea . 96 8.3.87 SM2 – SafetyNET Message, Coastal Warning Area . 98 SIST EN 61162-1:2017



IEC 61162-1:2016  IEC 2016 – 5 –
8.3.88 SM3 – SafetyNET Message, Circular Area address . 100 8.3.89 SM4 – SafetyNET Message, Rectangular Area Address . 102 8.3.90 SMB – IMO SafetyNET Message Body . 105 8.3.91 SPW – Security password sentence . 106 8.3.92 SSD – AIS ship static data . 107 8.3.93 STN – Multiple data ID . 107 8.3.94 THS – True heading and status . 108 8.3.95 TLB – Target label . 108 8.3.96 TLL – Target latitude and longitude . 108 8.3.97 TRC – Thruster control data . 109 8.3.98 TRL – AIS transmitter-non-functioning log . 110 8.3.99 TRD – Thruster response data . 111 8.3.100 TTD – Tracked target data . 111 8.3.101 TTM – Tracked target message . 113 8.3.102 TUT – Transmission of multi-language text . 114 8.3.103 TXT – Text transmission . 115 8.3.104 UID – User identification code transmission . 116 8.3.105 VBW – Dual ground/water speed . 116 8.3.106 VDM – AIS VHF data-link message . 117 8.3.107 VDO – AIS VHF data-link own-vessel report . 118 8.3.108 VDR – Set and drift . 118 8.3.109 VER – Version . 119 8.3.110 VHW – Water speed and heading . 119 8.3.111 VLW – Dual ground/water distance . 120 8.3.112 VPW – Speed measured parallel to wind . 120 8.3.113 VSD – AIS voyage static data . 120 8.3.114 VTG – Course over ground and ground speed . 121 8.3.115 WAT – Water level detection . 121 8.3.116 WCV – Waypoint closure velocity . 122 8.3.117 WNC – Distance waypoint to waypoint . 123 8.3.118 WPL – Waypoint location . 123 8.3.119 XDR – Transducer measurements . 123 8.3.120 XTE – Cross-track error, measured . 124 8.3.121 XTR – Cross-track error, dead reckoning. 125 8.3.122 ZDA – Time and date . 125 8.3.123 ZDL – Time and distance to variable point . 125 8.3.124 ZFO – UTC and time from origin waypoint . 125 8.3.125 ZTG – UTC and time to destination waypoint . 126 9 Applications. 126 9.1 Example parametric sentences . 126 9.1.1 General . 126 9.1.2 Example 1 – LORAN-C latitude/longitude . 126 9.1.3 Example 2 – LORAN-C arrival alarm . 126 9.1.4 Example 3 – Proprietary sentence . 127 9.1.5 Example 4 – RMA examples .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.