This document specifies the construction characteristics, performances and marking related to safety and the rational use of energy of portable, flat gas appliances directly supplied at the LPG vapour pressure, incorporating a gas cartridge complying with EN 417:2012, inserted horizontally in the chassis.
NOTE 1   These appliances are referred to in the body of the text as “appliances”.
This document covers appliances for outdoor or in well ventilated areas uses only.
This document does not cover appliances supplied by an external gas source.
For example, the following types of appliances are covered:
a)   cooking appliances (stoves, barbecues);
b)   heating appliances.
This document specifies the requirements applicable to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which could be refilled by the user.
This document does not cover appliances of direct pressure propane category.
Requirements for rational use of energy have been considered for stove burners.
NOTE 2   However, such requirements have not been considered for the other types of appliances because:
-   for barbecues, this type of cooking varies according to the type of food and region where the appliance is used;
-   for heating appliances, all the heat produced is discharged into the environment.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of burners burning liquefied petroleum gas and designed to heat up vessels of diameter greater than 300 mm, containing liquids or food. This standard overs appliances, generally floor standing, fitted with one or several open burners without enclosure, designed to be used outdoors and operating with the gases corresponding to the categories indicated in 4.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles.
It details health and safety requirements on:
—   the selection of materials;
—   components and appliances;
—   design considerations;
—   tightness testing of installations;
—   the contents of the user's handbook.
This document only covers installations supplied with 3rd family gases (LPG).
It does not cover:
—   water connections or electrical power supplies to the appliance(s);
—   portable appliances, incorporating their own LPG supply;
—   the installation of LPG appliances to be used for commercial purposes;
—   LPG installations on boats;
—   LPG supply equipment and LPG appliances separate from and external to the body of the vehicle.
This document covers LPG tanks fulfilling the requirements of the Pressure Equipment Directive (2014/68/EU).
Attention is drawn to the Pressure Equipment Directive (2014/68/EU) for any parts of the installation operating above 0,5 bar.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of independent stoves, side burners, covered burners, open burners, griddles, radiant grills, burning liquefied petroleum gas, referred to in the body of the text as "appliances".
This document covers appliances, used outdoors and operating with the gases of the third family according to EN 437:2018.
Appliances used in leisure vehicles and boats are outside the field of application of this standard.
Independent stove burners, whose nominal heat input is below 1,16 kW, griddles and radiant grills, are not subject to any special requirement concerning the rational use of energy due to their low rate and their use for short periods of time.
This document does not state all requirements for appliances of other nature incorporating a stove (for example barbecues are not covered by this standard but a side burner of a barbecue is covered by this standard).
This document does not cover regulators that are used with those appliances.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas cartridge or gas cylinder, excepting those where the gas cartridge is inserted horizontally in the chassis.
NOTE   These appliances are referred to in the body of the text as "appliances".
This document applies to various types of portable appliances burning liquefied petroleum gases at vapour pressure and designed to be used with cartridges as complying with EN 417 or gas cylinders.
This document covers appliances for outdoor or in well ventilated areas uses only.
For example the following types of appliances are covered:
a)   cooking appliances (stoves, grills, barbecues...);
This document does not cover barbecues that can be used indoors;
b)   lighting appliances;
c)   heating appliances;
This document only applies to appliances with a maximum heat input of up to 3 kW (Hs) for outdoor use only;
d)   blowtorches;
This document only applies to blowtorches without a flexible hose;
e)   laboratory burners.
The requirements apply to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which may or may not be refilled by the user
It does not apply to lighters as defined in EN ISO 9994.
It does not apply to gas appliances operating with a valve cartridge which is horizontally integrated into the chassis of the appliance also called "flat portable gas stove".
Requirements for rational use of energy have been included for stove burners.
However, such requirements have not been included for the other types of appliances because:
-   for grills and barbecues, this is a type of cooking which is achieved by various means such as radiant elements; in addition this type of cooking varies according to the type of food and region where the appliance is used;
-   for lighting appliances, the consumption is insignificant because these appliances have a very low rate and are used only for a few hours in a year;
-   for heating appliances, all the heat produced is discharged into the environment;
-   for tools such as blowtorches which are not professional tools in regular use, the gas consumption depends very much on the way it is used.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of independent stoves, side burners, covered burners, open burners, griddles, radiant grills, burning liquefied petroleum gas, referred to in the body of the text as "appliances".
This document covers appliances, used outdoors and operating with the gases of the third family according to EN 437:2018.
Appliances used in leisure vehicles and boats are outside the field of application of this standard.
Independent stove burners, whose nominal heat input is below 1,16 kW, griddles and radiant grills, are not subject to any special requirement concerning the rational use of energy due to their low rate and their use for short periods of time.
This document does not state all requirements for appliances of other nature incorporating a stove (for example barbecues are not covered by this standard but a side burner of a barbecue is covered by this standard).
This document does not cover regulators that are used with those appliances.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This draft European Standard describes and specifies the characteristics and performance requirements for assemblies made of tubing and hoses complying with EN 16436-1 to be used in the same conditions.
All connections are given in Annex B.
This draft European Standard only defines specific connections which are not defined in other standards (e.g. EN 16129).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the design, safety and marking requirements and test methods for flueless patio heaters for outdoor or amply ventilated area use only.
These appliances are for use exclusively with gases of the third family as defined in Clause 4.
This European standard applies to appliances that have a nominal heat input not exceeding 17 kW (based on the gross calorific value), supplied with a maximum inlet pressure of 50 mbar:
-   fixed or,
-   movable, including those which comprise a housing for a transportable and rechargeable liquefied petroleum gas cylinder.
This European standard does not apply to appliances equipped with a fan for either combustion or circulation of the convection air.
This European standard does not cover LPG containers for liquefied petroleum gas, their associated regulator, tubing and flexible hoses used for gas supply of appliances covered by this European standard. Regulator, tubing and flexible hoses are covered by others standards (EN 16129, EN 16436-1 and prEN 16436-2, etc.) and national regulations.
This European standard does not lay down any specific requirements for the thermal efficiency of this type of appliances, but the requirements relating to combustion, which is a safety matter, ensure that the gas fuel will burn efficiently. However a method to measure the performance is described in informative Annex B.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators and automatic change-over devices having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, for use with butane, propane and their mixtures in the vapour phase.
This European Standard also applies to the safety devices which are included within regulating devices covered by this standard. The characteristics of these safety devices are given in Annexes A and B.
This European Standard also includes the requirements for:
-   adaptors for connecting to self closing valves;
-   auxiliary safety devices.
For the purpose of this European Standard:
-   regulators and automatic change-over devices are referred to as "regulating devices";
-   regulators, automatic change-over devices and adaptors are referred to as "devices".
The requirements apply to devices used in locations where the temperature likely to be reached during use is between -20 °C and +50 °C. Additional requirements for devices to be used at temperatures below –20 °C are given in Annex C.
Additional requirements for regulating devices intended to be used in caravans, motor caravans and freshwater boats are given in Annex D.
Additional requirements for regulating devices intended to be used in seawater boats are given in Annex M.
For specific use in caravans motor caravans and boats (freshwater and seawater), the automatic change over device function may also be carried out by an assembly of regulators, forming an "automatic change over device system" as defined in 3.1.9.
For installation rules of devices and their possible associated safety devices, reference should be made to national regulations in force in the member countries.
All connections and the countries in which they are used are given in Annexes G and H.
This European Standard defines only specific connections which are not defined in other standards (e.g. EN 15202 for cylinder valve connections).

  • Standard
    138 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies material, construction, inspection and marking requirements for non-refillable metallic gas cartridges with or without a valve for use with portable appliances which comply with the requirements of EN 521.
This European Standard is applicable to cartridges with a total capacity of between 50 ml and 1 000 ml, designed to contain stenched liquefied petroleum gas or stabilized mixtures of liquefied petroleum gas with propadiene and/or methyl acetylene and/or di-methyl-ether or equivalent, where the pressure developed by the contents of the cartridge at 50 °C does not exceed 13,2 bar.
However, stenching of these gases is optional for cartridges with a total capacity not exceeding 150 ml.
This European Standard is not applicable for aerosol dispensers — manufactured, filled, tested and marked in accordance with Directive 2008/47/EEC.
This European Standard does not apply to appliances with an integral gas container which is not interchangeable, or to cartridges for filling such containers (e.g. lighters).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the constructional and performance characteristics, safety specifications, relevant test methods and marking of barbecues burning liquefied petroleum gas, referred to in the body of the text as "appliances".
This European Standard covers barbecues as defined in 3.6 and contact grills as defined in 3.8, used outdoors and operating with the gases indicated in 4.1 according to the categories indicated in 4.2. They are fitted with at least one cooking device.
This European Standard applies to these appliances and their functional sections whether or not the latter are independent or incorporated into an assembly.
This European Standard also applies to appliances designed to be built-in.
This European Standard only applies to type testing.
Appliances supplied with third family gas at pressures greater those defined in 4.2 are outside the field of application of this European Standard.
During the consideration of this text, it was apparent that the concept of thermal efficiency with regard to appliances such as barbecues was not appropriate.
This is because:
-   during cooking, there is an additional transfer of heat due to the meat juices falling onto the refractories;
-   there is no relation between the item to be cooked and the useful area;
-   the barbecue is an outdoor appliance in which the action of the wind is important in relation to efficiency.
In consequence there is no specific requirement covering thermal efficiency for this type of appliance.
This European Standard does not state all applicable requirements for integral equipments of other nature (for example burners covered by EN 484).

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as "heaters", burning LPG, for vehicles and boats.
This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes.
This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle's interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply.
Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium.
For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary.
This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033.
NOTE   If a LPG operated heater is installed in a motorized vehicle being subject to European road traffic legislation, the directives of the Council for the approximation of the laws, regulations and administrative provisions of the member states relating to the heating of the interior of motor vehicles should be applied.
These heaters are also suitable for caravan holiday homes.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for: vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12); caravan holiday homes; agricultural, forestry and mobile machinery, and boats; hereafter called "appliance". This standard applies to appliances: type C1, C3 and C5 (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof; fitted with atmospheric burners; appliances fitted with or without a fan on the combustion circuit; using LPG at the pressure I3BP(30) indicated in EN 437, (for caravan holiday homes and boats see Annex A); of nominal heat input not exceeding 7 kW (Hi); appliances whether connected to the water mains pressure or on board water supply; appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional 230 V heating element). This standard does not contain all the necessary requirements for: appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use. This standard covers type testing only.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the requirements, the test methods and the marketing of  domestic flueless space heaters, including diffusive catalytic combustion heaters, having a nominal heat input (Hs), not exceeding 4,2 kW burning 3rd family gases at nominal operating pressures not exceeding 50 mbar, referred to in the text as 'appliances'.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for:
   vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12);
   caravan holiday homes;
   agricultural, forestry and mobile machinery, and
   boats;
hereafter called "appliance".
This standard applies to appliances:
   type C1, C3 and C5 (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof;
   fitted with atmospheric burners;
   appliances fitted with or without a fan on the combustion circuit;
   using LPG at the pressure I3BP(30) indicated in EN 437, (for caravan holiday homes and boats see Annex A);
   of nominal heat input not exceeding 7 kW (Hi);
   appliances whether connected to the water mains pressure or on board water supply;
   appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional 230 V heating element).
This standard does not contain all the necessary requirements for:
   appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use.
This standard covers type testing only.
NOTE 1   Alternatively appliances (storage water heaters) for caravan holiday homes may comply with EN 89.
NOTE 2   For space heating aspects see EN 624 "Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats".

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines requirements and test methods concerning, in particular, the construction, safety as well as classification and marking of non-domestic flueless space heaters (including greenhouse heaters and diffusive catalytic combustion heaters), having a nominal heat input not exceeding 10 kW (Hs) burning 3rd family gases at nominal operating pressure not exceeding 50 mbar, referred to in the body of the text as 'appliances'. It covers the following types of appliance: a) fixed heaters; b) portable or mobile heaters including those that incorporate a compartment for a transportable refillable LPG cylinder.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This amendment is to account for technical comments received after the Formal Vote.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines, for the purpose of type examination, the requirements, the test methods and the marking of non-domestic flueless space heaters (including greenhouse heaters and diffusive catalytic combustion heaters), having a nominal heat input not exceeding 10 kW  (Hs) burning 3rd family gases at nominal operating pressure not exceeding 50 mbar,  referred to in the body of the text as 'appliances'.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines, for the purpose of type examination, the construction, the safety characteristics, the test methods and the marking of mobile and portable non-domestic forced convection direct fired air heaters with a rated heat input not exceeding 180 kW (Hs) and burning 3rd family gases, referred to in the body of the text as 'appliances'.  This standard covers the following type of mobile and portable non domestic forced convection direct fired air heaters of type A3 (see CR 1749) fitted with an integral burner intended for use in other than residential dwellings:  a) low gas pressure appliances operating at pressures up to and including 50 mbar burning commercial butane and/or commercial propane;  b) medium gas pressure appliances operating at pressures above 50 mbar and up to 4,0 bar burning commercial butane and/or commercial propane.  It does not apply to appliances which are intended to be fixed or permanently installed, or to appliances which incorporate liquid feed burners.     Requirements for appliances given in this standard assume that the supply of gas from the gas cylinder will be governed by a pressure regulator.  These appliances are not equipped with an appliance governor.  Requirements for controls, given herein, relate to controls fitted as part of, or supplied with, particular appliances; they do not necessarily provide a complete specification for controls intended for general use.  This Standard does not cover cylinders for liquefied petroleum gases or their associated regulators.  There are no specific thermal efficiency requirements appropriate to these types of  appliances as:  c) all the heat produced by the combustion process is released into the space to be heated;  d) the requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the constructional features, safety and operational requirements, test techniques and marking of absorption refrigerators using commercial butane and propane (referred to within the text as "appliances".  This standard is applicable to room sealed (Type C11) and flueless (Type A11), as defined in CR 1749, refrigerators using gas equipment fuelled by third family gases as classified in 4.2.  This standard only applies to type testing.  The gas consumption of absorption refrigerators is of the same order of magnitude as pilots currently used on other types of burners, maximum being 60 g/h.  Consequently efficiency measurement is not considered relevant for these appliances and is not covered by this standard.  This standard does not cover the requirements.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of independent stoves, side burners, covered burners, open burners, griddles, radiant grills, burning liquefied petroleum gas, referred to in the body of the text as "appliances".
This document covers appliances, used outdoors and operating with the gases of the third family according to EN 437:2018.
Appliances used in leisure vehicles and boats are outside the field of application of this standard.
Independent stove burners, whose nominal heat input is below 1,16 kW, griddles and radiant grills, are not subject to any special requirement concerning the rational use of energy due to their low rate and their use for short periods of time.
This document does not state all requirements for appliances of other nature incorporating a stove (for example barbecues are not covered by this standard but a side burner of a barbecue is covered by this standard).
This document does not cover regulators that are used with those appliances.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas cartridge or gas cylinder, excepting those where the gas cartridge is inserted horizontally in the chassis.
NOTE   These appliances are referred to in the body of the text as "appliances".
This document applies to various types of portable appliances burning liquefied petroleum gases at vapour pressure and designed to be used with cartridges as complying with EN 417 or gas cylinders.
This document covers appliances for outdoor or in well ventilated areas uses only.
For example the following types of appliances are covered:
a)   cooking appliances (stoves, grills, barbecues...);
This document does not cover barbecues that can be used indoors;
b)   lighting appliances;
c)   heating appliances;
This document only applies to appliances with a maximum heat input of up to 3 kW (Hs) for outdoor use only;
d)   blowtorches;
This document only applies to blowtorches without a flexible hose;
e)   laboratory burners.
The requirements apply to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which may or may not be refilled by the user
It does not apply to lighters as defined in EN ISO 9994.
It does not apply to gas appliances operating with a valve cartridge which is horizontally integrated into the chassis of the appliance also called "flat portable gas stove".
Requirements for rational use of energy have been included for stove burners.
However, such requirements have not been included for the other types of appliances because:
-   for grills and barbecues, this is a type of cooking which is achieved by various means such as radiant elements; in addition this type of cooking varies according to the type of food and region where the appliance is used;
-   for lighting appliances, the consumption is insignificant because these appliances have a very low rate and are used only for a few hours in a year;
-   for heating appliances, all the heat produced is discharged into the environment;
-   for tools such as blowtorches which are not professional tools in regular use, the gas consumption depends very much on the way it is used.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators and automatic change-over devices having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, for use with butane, propane and their mixtures in the vapour phase.
The maximum supply pressures for devices covered by this standard are 7,5 bar for butane and 16 bar for propane and LPG.
This document also applies to the safety devices which are included within regulating devices covered by this document.
This document also includes requirements for:
-   adaptors for connecting to self-closing valves;
-   integral or auxiliary safety devices.
This document covers devices used in locations where the temperature likely to be reached during use is between −20 °C and +50 °C
Additional requirements for devices to be used at temperatures down to −30 °C and/or up to +80 °C are defined in Annex C.
This document gives special requirements for:
-   devices intended to be used in caravans and motor caravans (Annex D);
-   devices intended to be used in boats (Annex M);
-   specific connections which are not defined in other standards (e.g. EN 15202:2012 for cylinder valve connections).
NOTE   1Boats considered in this document are recreational crafts covered by European Directive 2013/53/EU.

  • Draft
    149 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard defines the constructional and operational characteristics, the safety requirements and test methods, the marking of regulators having a capacity of less than or equal to 100 kg/h, other than the regulators covered by EN 12864, for butane, propane or their mixtures, in the gaseous phase. Regulators for caravans up to 1,5 kg/h are covered by EN 12864.
NOTE 1 bar = 105 Pa
This European standard also applies to the safety devices which are included within regulators covered by this standard. The characteristics of these devices are given in annexes A and B.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Add as a new 3rd paragraph:
"Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium."

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard sets out the design, safety and marking requirements and test methods for flueless patio heaters for outdoor or ventilated area use only. These appliances are for use exclusively with gases of the third family as defined in 4.
This document applies to appliances that have a nominal heat output not exceeding 17 kW (based on the gross calorific value);
- fixed or,
- movable, including those which comprise a housing for a transportable and rechargeable liquefied petroleum gas cylinder.
This document does not apply to appliances equipped with a fan for either combustion or circulation of the convection air.
This document does not lay down any specific requirements for the thermal efficiency of this type of appliance, since:
- all the heat produced by the combustion process is released into the space to be heated;
- the requirements relating to combustion, which is a safety matter, ensure that the gas fuel will burn efficiently.
However a method to measure the performances is described in informative annex C.
This standard does not apply to appliances covered by EN 449.
This document deals only with type testing.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard defines the constructional and operational characteristics, the safety requirements and test methods, and the marking of automatic change over devices with a capacity of less than or equal to 100 kg/h and having a maximum regulated pressure of less than or equal to 4 bar for butane, propane or their mixtures only in the vapour phase.
NOTE 1 bar = 105 Pa
Liquefied gases containing methylacetylene and propadiene are not covered by this standard. This European standard also covers safety devices likely to be fitted onto automatic change over devices. The characteristics of these devices are given in
annex A.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from: - pressurized gas container to a regulating device, - pressurized gas container to an appliance, - regulating device to an appliance, and - regulating device to installation pipework, in environments of a temperature range from –30 °C to +70 °C. Working pressures are from 0 bar to 30 bar. Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures. This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2. This European Standard does not apply to hoses for: - welding purposes (see EN ISO 3821, EN 1327); - propulsion purposes; - LPG transfer purposes (see EN 1762).

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
-   pressurized gas container to a regulating device,
-   pressurized gas container to an appliance,
-   regulating device to an appliance, and
-   regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
-   welding purposes (see EN ISO 3821, EN 1327);
-   propulsion purposes;
-   LPG transfer purposes (see EN 1762).

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies the constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of boiling burners burning liquefied petroleum gas and designed to heat up vessels containing liquids or food, or a heating plate. They are referred to in the body of the text as "appliances".  This standard covers appliances, generally floor standing, fitted with one or several burners with a total heat input not exceeding 14 kW, designed to be used outdoors and operating with the gases indicated in 4.1 according to the categories indicated in 4.2.  Appliances supplied with third family gas at pressures greater those defined in 4.2 are outside the field of application of this standard.  Appliances covered by this standard are not connected to a flue for the products of combustion and are not connected to the mains electrical supply.  Appliances with a nominal heat input below 1,16 kW and appliances which are not designed to receive the test vessel described in 7.1.4 in any of their configurations are not subject to any requirement concerning the rational use of energy.   This standard applies only to type testing.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the construction characteristics, performances and marking related to safety and the rational use of energy of portable, flat gas appliances directly supplied at the LPG vapour pressure, incorporating a gas cartridge complying with EN 417:2012, inserted horizontally in the chassis.
NOTE 1   These appliances are referred to in the body of the text as “appliances”.
This document covers appliances for outdoor or in well ventilated areas uses only.
This document does not cover appliances supplied by an external gas source.
For example, the following types of appliances are covered:
a)   cooking appliances (stoves, barbecues);
b)   heating appliances.
This document specifies the requirements applicable to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which could be refilled by the user.
This document does not cover appliances of direct pressure propane category.
Requirements for rational use of energy have been considered for stove burners.
NOTE 2   However, such requirements have not been considered for the other types of appliances because:
-   for barbecues, this type of cooking varies according to the type of food and region where the appliance is used;
-   for heating appliances, all the heat produced is discharged into the environment.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles. It details safety and health requirements on the selection of materials, components and appliances, on design considerations and tightness testing of installations and on the contents of the user's handbook.
This European Standard does not cover installations supplied from other than 3rd family gases (LPG), water connections or electrical power supplies to the appliance(s). Portable appliances, incorporating their own gas supply, are not considered part of the installation and are outside the scope of this standard. It does not include the installation of LPG appliances to be used for commercial purposes or for boats. Gas supply equipment and gas appliances separate from and external to the body of the vehicle are also not considered by this standard.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas cartridge or gas cylinder, excepting those where the gas cartridge is inserted horizontally in the chassis.
NOTE   These appliances are referred to in the body of the text as "appliances".
This document applies to various types of portable appliances burning liquefied petroleum gases at vapour pressure and designed to be used with cartridges as complying with EN 417 or gas cylinders.
This document covers appliances for outdoor or in well ventilated areas uses only.
For example the following types of appliances are covered:
a)   cooking appliances (stoves, grills, barbecues...);
This document does not cover barbecues that can be used indoors;
b)   lighting appliances;
c)   heating appliances;
This document only applies to appliances with a maximum heat input of up to 3 kW (Hs) for outdoor use only;
d)   blowtorches;
This document only applies to blowtorches without a flexible hose;
e)   laboratory burners.
The requirements apply to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which may or may not be refilled by the user
It does not apply to lighters as defined in EN ISO 9994.
It does not apply to gas appliances operating with a valve cartridge which is horizontally integrated into the chassis of the appliance also called "flat portable gas stove".
Requirements for rational use of energy have been included for stove burners.
However, such requirements have not been included for the other types of appliances because:
-   for grills and barbecues, this is a type of cooking which is achieved by various means such as radiant elements; in addition this type of cooking varies according to the type of food and region where the appliance is used;
-   for lighting appliances, the consumption is insignificant because these appliances have a very low rate and are used only for a few hours in a year;
-   for heating appliances, all the heat produced is discharged into the environment;
-   for tools such as blowtorches which are not professional tools in regular use, the gas consumption depends very much on the way it is used.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas container. It also defines test methods and the requirements for marking and the information to be given in the instructions.
NOTE   These appliances are referred to in the body of the text as "appliances".
This European Standard applies to various types of portable appliances burning liquefied petroleum gases at vapour pressure and designed to be used with (non refillable) cartridges as complying with EN 417 or any types of gas cylinders other than cartridges. For example the following types of appliances are covered:
a)   cooking appliances (hotplates, grills, barbecues...).
This European Standard does not cover barbecues that can be used indoors;
b)   lighting appliances;
c)   heating appliances.
This European Standard only applies to appliances with a maximum heat input of up to 3 kW (Hs) for outdoor use only;
d)   blowlamps.
This European Standard only applies to blowlamps without a flexible hose;
e)   laboratory burners.
The requirements apply to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly.
This European Standard only applies to type examination.
Appliances covered by this European Standard are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply.
This European Standard covers neither appliances supplied with LPG in the liquid phase nor those incorporating a fixed gas reservoir which may or may not be refilled by the user. This European Standard does not cover gas containers or flexible hose.
It does not apply to smokers’ lighters covered by EN ISO 9994.
Requirements for rational use of energy have been included for hotplate burners.
However, such requirements have not been included for the

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies constructional and performance characteristics, safety specifications and rational use of energy, relevant test methods and marking of independent hotplates, including those fitted with a grill, burning liquefied petroleum gas, referred to in the body of the text as "appliances".  This standard covers independent hotplates, including those fitted with a grill as defined in 3.39, used outdoors and operating with the gases indicated in 4.1 and according to the categories specified in 4.2.  This standard applies to these appliances and their functional sections whether or not the latter are independent or incorporated into an assembly.  This standard applies only to type testing.  Appliances supplied with third family gas at pressures greater those defined in 4.2 are outside the field of application of this standard.  Appliances used in leisure vehicles and boats are outside the field of application of this standard.  Independent hotplate burners, whose nominal heat input is below 1,16 kW and grills, are not subject to any special requirement concerning the rational use of energy due to their low rate and their use for short periods of time

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
-   pressurized gas container to a regulating device,
-   pressurized gas container to an appliance,
-   regulating device to an appliance, and
-   regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
-   welding purposes (see EN ISO 3821, EN 1327);
-   propulsion purposes;
-   LPG transfer purposes (see EN 1762).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard specifies the design, safety and marking requirements and test methods for flueless patio heaters for outdoor or amply ventilated area use only.
Although they are not covered by this standard, the requirements of this standard are applicable to appliances that may be used inside habitations which, in addition, shall have a heat input not exceeding 4,2 kW and comply with EN 449.
These appliances are for use exclusively with gases of the third family as defined in Clause 4.
This European standard applies to appliances that have a nominal heat input not exceeding 17 kW (based on the gross calorific value);
-   fixed or,
-   movable, including those which comprise a housing for a transportable and rechargeable liquefied petroleum gas cylinder.
This European standard does not apply to appliances equipped with a fan for either combustion or circulation of the convection air.
This European standard does not cover LPG containers for liquefied petroleum gas, neither their associated regulator nor tubing and flexible hoses which shall comply with national requirements in force.
This European standard does not lay down any specific requirements for the thermal efficiency of this type of appliances, but the requirements relating to combustion, which is a safety matter, ensure that the gas fuel will burn efficiently. However a method to measure the performance is described in informative Annex C.
This standard does not apply to appliances covered by EN 416-1, EN 419-1, EN 449, EN 461 and EN 521.
This European standard only covers type testing.
Items relating to quality assurance systems, production testing and particularly certificates of conformity of auxiliary equipment are not covered by this European standard.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
-   pressurized gas container to a regulating device,
-   pressurized gas container to an appliance,
-   regulating device to an appliance, and
-   regulating device to installation pipework,
in environments of a temperature range from –30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
-   welding purposes (see EN ISO 3821, EN 1327);
-   propulsion purposes;
-   LPG transfer purposes (see EN 1762).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard defines the structural and operational characteristics, the safety requirements and test methods, the marking, of low-pressure, non adjustable regulators for butane, propane or their mixtures, referred to in the body of the text as "regulators".
This European Standard covers regulators supplied at vapour pressure by one or several portable cylinders. They are normally directly connected to the cylinder valve or the self closing valve.
The regulators covered by this standard are designed for a maximum outlet pressure of up to and including 200 mbar and a maximum rate of up to and including 4 kg/h.
This European Standard also applies to the safety devices which are supplied as part of the regulators. The characteristics of these devices are given in annex A and B.
The requirements of this European Standard apply generally to regulators used in locations where the temperature likely to be reached during use is between - 20 °C and + 50 °C, + 50 °C being the maximum temperature allowable for the cylinder. When the devices are subjected to temperatures below this range, they shall comply with special requirements defined in annex C.
Regulators designed for specific purposes (caravans and motor caravans) which are subjected to special
require-ments are dealt with in annex D.
This European standard does not include the installation rules for regulators and their possible associated safety devices. In this matter, reference should be made to national regulations in force in the member countries.
Regulators which are intended to be used with gases containing methylacetylene and propadiene are excluded from the scope of this European Standard.
This European standard only covers type testing.
WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators
The top part of these figures (above the horizontal line) applies to the regulator and is normative.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators having a capacity of less than or equal to 100 kg/h, other than the regulators covered by EN 12864, for butane, propane or their mixtures, in the gaseous phase.
Regulators for caravans up to 1,5 kg/h are covered by EN 12864.
NOTE   1 bar = 105 Pa.
This document also applies to the safety devices which are included within regulators covered by this document. The characteristics of these devices are given in annexes A and B.
The requirements apply generally to regulators used in locations where the temperature likely to be reached during use is between -20 °C and +50 °C. When the regulators are used at temperatures below -20 °C it is essential that they comply with special requirements which are defined in annex C.
This document does not include the installation rules for regulators. Reference should be made to national regulations in force in the member countries.
This document only covers type testing.
WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators.
The top part of these figures (above the horizontal line) applies to the regulator and is normative.
The bottom part of these figures (below the horizontal line) applies to the part to be connected to the regulator. This is given as a guide for the tests and is not normative.

  • Standard
    144 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the constructional and operational characteristics, the safety requirements and test methods, and the marking of automatic change over devices with a capacity of less than or equal to 100 kg/h and having a maximum regulated pressure of less than or equal to 4 bar for butane, propane or their mixtures only in the vapour phase.
NOTE   1 bar = 105 Pa.
Liquefied gases containing methylacetylene and propadiene are not covered by this standard.
This European Standard also covers safety devices likely to be fitted onto automatic change over devices. The characteristics of these devices are given in annex A.
The requirements of this European Standard generally cover designs where regulation is in one stage, using a single diaphragm. These requirements do not exclude designs using more than one diaphragm, provided that these diaphragms are integrated in a single automatic change over devices complying with the requirements of this European Standard.
For specific uses in caravans and leisure vehicles, the automatic change over devices function may also be carried out by an assembly of regulators, forming a "automatic change over devices system" as defined in 3.1.2. This standard covers such an assembly as follows:
-   special requirements for the manufacture, adjustment and operation of regulators forming a automatic change over devices system, as well as the corresponding test methods are given in annex B;
-   except for these special requirements, and unless otherwise stated, constructional and performance characteristics given in the body of the standard are also applicable to the devices in annex B.
The requirements apply generally to automatic change over device used in locations where the temperature likely to be reached during use is between -20 °C and +50 °C. When the devices are used at temperatures outside this range they shall comply with special requirements defined in annex C.
This standard does not include the installation rules

  • Standard
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard defines the structural and operational characteristics, the safety requirements and test methods, the marking, of low-pressure, non adjustable regulators for butane, propane or their mixtures, referred to in the body of the text as "regulators".
This European Standard covers regulators supplied at vapour pressure by one or several portable cylinders. They are normally directly connected to the cylinder valve or the self closing valve.
The regulators covered by this standard are designed for a maximum outlet pressure of up to and including 200 mbar and a maximum rate of up to and including 4 kg/h.
This European Standard also applies to the safety devices which are supplied as part of the regulators. The characteristics of these devices are given in annex A and B.
The requirements of this European Standard apply generally to regulators used in locations where the temperature likely to be reached during use is between - 20 °C and + 50 °C, + 50 °C being the maximum temperature allowable for the cylinder. When the devices are subjected to temperatures below this range, they shall comply with special requirements defined in annex C.
Regulators designed for specific purposes (caravans and motor caravans) which are subjected to special
require-ments are dealt with in annex D.
This European standard does not include the installation rules for regulators and their possible associated safety devices. In this matter, reference should be made to national regulations in force in the member countries.
Regulators which are intended to be used with gases containing methylacetylene and propadiene are excluded from the scope of this European Standard.
This European standard only covers type testing.
WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators
The top part of these figures (above the horizontal line) applies to the regulator and is normative.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

UAP of 4 months (TC Res 7/2000) (CC/000717)
Update of TC forecast for stage 40/49 following TC resolutions dated 2001-06-19/20

  • Amendment
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European standard defines the structural and operational characteristics, the safety requirements and test methods, the marking, of low-pressure, non adjustable regulators for butane, propane or their mixtures, referred to in the body of the text as "regulators".
This European Standard covers regulators supplied at vapour pressure by one or several portable cylinders. They are normally directly connected to the cylinder valve or the self closing valve.
The regulators covered by this standard are designed for a maximum outlet pressure of up to and including 200 mbar and a maximum rate of up to and including 4 kg/h.
This European Standard also applies to the safety devices which are supplied as part of the regulators. The characteristics of these devices are given in annex A and B.
The requirements of this European Standard apply generally to regulators used in locations where the temperature likely to be reached during use is between - 20 °C and + 50 °C, + 50 °C being the maximum temperature allowable for the cylinder. When the devices are subjected to temperatures below this range, they shall comply with special requirements defined in annex C.
Regulators designed for specific purposes (caravans and motor caravans) which are subjected to special
require-ments are dealt with in annex D.
This European standard does not include the installation rules for regulators and their possible associated safety devices. In this matter, reference should be made to national regulations in force in the member countries.
Regulators which are intended to be used with gases containing methylacetylene and propadiene are excluded from the scope of this European Standard.
This European standard only covers type testing.
WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators
The top part of these figures (above the horizontal line) applies to the regulator and is normative.

  • Standard
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles. It details safety and health requirements on the selection of materials, components and appliances, on design considerations and tightness testing of installations and on the contents of the user's handbook.
This European Standard does not cover installations supplied from other than 3rd family gases (LPG), water connections or electrical power supplies to the appliance(s). Portable appliances, incorporating their own gas supply, are not considered part of the installation and are outside the scope of this standard. It does not include the installation of LPG appliances to be used for commercial purposes or for boats. Gas supply equipment and gas appliances separate from and external to the body of the vehicle are also not considered by this standard.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies material, construction, inspection and marking requirements for non-refillable metallic gas cartridges with or without a valve for use with portable appliances which comply with the requirements of EN 521.
This standard is applicable to cartridges with a total capacity of between 50 ml and 1 000 ml, designed to contain stenched liquefied petroleum gas or stabilized mixtures of liquefied petroleum gas with propadiene and/or methyl acetylene, where the pressure developed by the contents of the cartridge at 50 °C does not exceed 13,2 bar.
However, stenching of these gases is optional for cartridges with a total capacity not exceeding 150 ml.
This standard is not applicable to aerosol dispensers - manufactured, filled, tested and marked in accordance with the Directive 75/324/EEC.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day