EN-IEC 62311 applies to electronic and electrical equipment for which no dedicated product standard or product family standard regarding human exposure to electromagnetic fields applies. It covers equipment with intentional or non-intentional radiators as well as a combination thereof. This document provides assessment methods and criteria to evaluate equipment against limits on exposure of people related to electric, magnetic and electromagnetic fields. The frequency range covered is from 0 Hz ...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62209 series is applicable to any wireless communication device capable of transmitting electromagnetic fields (EMF) intended to be used at a position near the human body, in the manner described by the manufacturer, with the radiating part(s) of the device at distances up to and including 200 mm from a human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, ...view more

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

This document provides methods for the determination of radio-frequency (RF) field strength
and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS)
for the purpose of evaluating human exposure.
This document:
a) considers intentionally radiating RBS which transmit on one or more antennas using one
or more frequencies in the range 110 MHz to 100 GHz;
b) considers the impact of ambient sources on RF exposure at least in the 100 kHz to
300 GHz frequency r...
view more

    • sale 10% off
    • Standard
      243 pages
      English language
    • e-Library read for
      1 day

This European Standard provides the procedure for the specific assessment required in Annex A of EN 50527 1:2015 for workers with implanted cardioverter defibrillators. It offers different approaches for doing the risk assessment. The most suitable one shall be used. If the worker has other Active Implantable Medical Devices (AIMDs) implanted additionally, they have to be assessed separately.

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This standard provides methods for assessing compliance with the requirements of the Directive 2013/35/EU] at a site operating one or more broadcast transmitters.
This standard covers the frequency range up to 40 GHz.
NOTE   The Council and European Parliament Directive 2013/35/EU will be transposed into national legislation in all the EU member countries. Users of this standard shall consult the national legislation related to this transposition in order to identify the national regulations and...
view more

    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This product standard applies to devices operating within the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications, in relation to exposure to electromagnetic fields
The object of this generic standard is to provide a route for evaluation of such equipment against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current.
NOTE   Other standards can apply to p...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

The purpose of this Technical Report is to give advice on, and explanation of, the preparation of suitable EMF standards. It also aims to ensure that relevant deliverables from all CLC TCs will accurately reflect the current policy and legislative background on EMF exposure.

    • sale 10% off
    • Technical report
      12 pages
      English language
    • e-Library read for
      1 day

The object of this generic standard is to provide a route for evaluation of such equipment against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current.
This standard applies to electronic and electrical equipment for which no dedicated product- or product family standard, or standard relating to low power equipment,  regarding human exposure to electromagnetic fields exists. If such a standard does exist then it shall be used and this stan...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This product standard is related to human exposure to radiofrequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz.
The object is to assess the compliance of such equipment with the general public basic restrictions (directly or indirectly via compliance with reference levels) and the workers’ exposure limits values (directly or indirectly via compliance with action values), when it is put into service in its operational environment.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or embedded in garments. The applicable frequency range is from 30 MHz to 6 GHz.
The objective of this standard is to demonstrate the compliance of such devices with the basi...
view more

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European standard provides simple conformity assessment methods for low-power electronic and electrical equipment operating at frequencies between 10 MHz and 300 GHz to an electromagnetic field (EMF) exposure limit. If such equipment cannot be shown to comply with the applicable EMF exposure requirements using the exposure assessment methods in this standard, then other EMF product standards, may be used for conformity assessment.
This document has been prepared under a mandate given to CE...
view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This product standard is related to human exposure to radiofrequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz.
The object is to assess the compliance of such equipment with the general public basic restrictions (directly or indirectly via compliance with reference levels) and the workers’ exposure limit values (directly or indirectly via compliance with action values), when it is placed on the market.
For low power devices the appli...
view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

The object of this generic standard is to provide a route for evaluation of equipment used by workers against limits on human exposure to electric, magnetic and electromagnetic fields, and induced and contact current  when it is put into service in its operational environment, and also for in situ or post-market evaluation of such equipment
The frequency range covered is 0 Hz to  300 GHz.
The requirement for this standard arises from the withdrawal of EMF standardisation mandate M/305 and its ...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This product standard applies to wireless communication devices used in close proximity to the human ear (e.g. mobile phones, wireless headsets). The applicable frequency range is from 300 MHz to 6 GHz.
The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields.
For devices used next to the body or in front of the face the applicable product standard is...
view more

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

IEC 61786-2:2014 provides requirements for the measurement of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz, and DC magnetic fields, to evaluate the exposure levels of the human body to these fields. Specifically, this standard gives requirements for establishing measurement procedures that achieve defined goals pertaining to human exposure. Because of differences in the characteristics of the fields from sources in the various environments,...view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard provides a general procedure to assess workers’ exposure to electric and magnetic fields (EMF) in work places associated with the production, transmission and distribution of electric energy, and to demonstrate compliance with exposure limit values and action levels as stated in the Council and European Parliament “EMF” Directive 2013/35/EU [10].
It has the role of a specific workplace standard. It takes into account the non-binding application guide for implementing the ...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62209 specifies protocols and test procedures for measurement of the peak
spatial-average SAR induced inside a simplified model of the head with defined reproducibility.
It applies to certain electromagnetic field (EMF) transmitting devices that are positioned next
to the ear, where the radiating structures of the device are in close proximity to the human
head, such as mobile phones, cordless phones, certain headsets, etc. These protocols and
test procedures provide a cons...
view more

    • sale 10% off
    • Standard
      228 pages
      English language
    • e-Library read for
      1 day

This European Standard provides a procedure to assess the risk to workers bearing one or more active
implantable medical devices from exposure to electric, magnetic and electromagnetic fields at a workplace. It
describes how a general risk assessment should be performed and determines whether it is necessary to
carry out a detailed risk assessment.
NOTE 1 This European Standard does not cover indirect effects caused by non active implants.
NOTE 2 The risk of human exposure to EMF considered...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard provides the procedure for the specific assessment required in EN 50527-1:2016,
Annex A, for workers with implanted pacemakers. It offers different approaches for doing the risk
assessment. The most suitable one will be used. If the worker has other Active Implantable Medical Devices
(AIMDs) implanted additionally, they need to be assessed separately.
The purpose of the specific assessment is to determine the risk for workers with implanted pacemakers
arising from exp...
view more

    • sale 10% off
    • Standard
      70 pages
      English language
    • e-Library read for
      1 day

EN IEC 61786-1 provides guidance for measuring instruments used to measure the field strength of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz and with DC magnetic fields to evaluate the exposure levels of the human body to these fields. Sources of fields include devices that operate at power frequencies and produce power frequency and power frequency harmonic fields, as well as devices that produce fields within the frequency range of this ...view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies in the vicinity of base station as defined in 3.2 the measurement methods, the measurement systems and the post processing that shall be used to determine in-situ the electromagnetic field for human exposure assessment in the frequency range 100 kHz to 300 GHz.

    • sale 10% off
    • Amendment
      10 pages
      English language
    • e-Library read for
      1 day

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

This European Standard gives elements to establish methods for measurement and calculation of quantities associated with the assessment of human exposure to electric, magnetic and electromagnetic fields (EMF) in the frequency range from 0 Hz to 300 GHz. The major intention of this Basic Standard is to give the common background and information to relevant EMF standards. This Basic Standard cannot go into details extensively due to the broad frequency range and the huge amount of possible applica...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

    • sale 10% off
    • Corrigendum
      1 page
      English language
    • e-Library read for
      1 day

This European Standard provides the procedure for the specific assessment required in Annex A of EN 50527-1:2010 for workers with implanted pacemakers. It offers different approaches for doing the risk assessment. The most suitable one shall be used. If the worker has other AIMDs implanted additionally, they have to be assessed separately. The purpose of the specific assessment is to determine the risk for workers with implanted pacemakers arising from exposure to electromagnetic fields at the w...view more

    • sale 10% off
    • Standard
      65 pages
      English language
    • e-Library read for
      1 day

This basic standard specifies the method for assessing overall exposure from all fixed radio frequency sources at a broadcast site. This assessment may be applied at any time but must be carried out when the exposure situation changes in or around this site. It plays an essential role in the coordination of different stakeholders, with respect to ensuring EMF exposure compliance in and around a broadcast site especially for equipment installed within the site.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This International Standard provides simple conformity assessment methods for low-power electronic and electrical equipment to an exposure limit relevant to electromagnetic fields (EMF). If such equipment cannot be shown to comply with the applicable EMF exposure requirements using the methods included in this standard for EMF assessment, then other standards, including IEC 62311 or other (EMF) product standards, may be used for conformity assessment.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62209 series is applicable to any wireless communication device capable of transmitting electromagnetic fields (EMF) intended to be used at a position near the human body, in the manner described by the manufacturer, with the radiating part(s) of the device at distances up to and including 200 mm from a human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, ...view more

    • sale 10% off
    • Standard
      116 pages
      English language
    • e-Library read for
      1 day

The scope of this European Standard is to provide a procedure in order to assess the risk to workers bearing 97 one or more active implantable medical devices from exposure to electric, magnetic and electromagnetic 98 fields at a workplace. It specifies how to perform a general risk assessment and to determine whether it is 99 necessary to carry out a detailed risk assessment.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This International Standard establishes measurement procedures for electric and magnetic field levels generated by AC power systems to evaluate the exposure levels of the human body to these fields. This standard is not applicable to DC power transmission systems. This International Standard is applicable to public exposure in the domestic environment and in areas accessible to the public. This standard specifies fundamental procedures for the measurement of fields, and, with regard to human exp...view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62369 presents procedures for the evaluation of human exposure to electromagnetic fields (EMFs) from devices used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications. It adopts a staged approach to facilitate compliance assessment. The first stage (Stage 1) is a simple measurement against the appropriate derived reference values. Stage 2 is a more complex series of measurements or calculations, coupled with analysis techniques...view more

    • sale 10% off
    • Standard
      75 pages
      English language
    • e-Library read for
      1 day

The object of this European Standard is to provide methods for assessing compliance with the requirements of the Directive 2004/40/EC at a site operating one or more broadcast transmitters. This European Standard covers the frequency range up to 40 GHz.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This European Standard gives elements to establish methods for measurement and calculation of quantities associated with the assessment of human exposure to electric, magnetic and electromagnetic fields (EMF) in the frequency range from 0 Hz to 300 GHz. The major intention of this Basic Standard is to give the common background and information to relevant EMF standards. This Basic Standard cannot go into details extensively due to the broad frequency range and the huge amount of possible applica...view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

The scope of this European Standard is to provide a general procedure in order to assess workers' exposure to electric, magnetic and electromagnetic fields in a work place to demonstrate compliance with exposure limit values and action values as stated in the Council and European Parliament Directive 2004/40/EC. The purpose of this European Standard is to - specify how to perform an initial assessment of the levels of workers' exposure to electromagnetic fields (EMF), if necessary including spec...view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies in the vicinity of base station as defined in 3.2 the measurement methods, the measurement systems and the post processing that shall be used to determine in-situ the electromagnetic field for human exposure assessment in the frequency range 100 kHz to 300 GHz.

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day

This standard applies to Short Wave  broadcast transmitters and installations  operating in the frequency range 3 MHz to 30  MHz. The objective of the standard is to  specify, for such a frequency band, basic  information allowing the definition of a  method for assessment of compliance  related to human exposure to radio frequency  electromagnetic fields.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This standard applies to Short Wave broadcast transmitters operating in the frequency range 3 MHz to 30 MHz. The object of this standard is to demonstrate the compliance of such equipment with the basic restrictions (directly or indirectly via compliance with reference levels) related to public human exposure to radio frequency electromagnetic fields.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This International Standard applies to electronic and electrical equipment for which no dedicated product- or product family standard regarding human exposure to electromagnetic fields applies.

    • sale 10% off
    • Standard
      77 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62226 applies to the frequency range for which exposure limits are based on the induction of voltages or currents in the human body when exposed to electric fields. This part defines in detail the coupling factor K - introduced by the IEC 62226 series to enable exposure assessment for complex exposure situations, such as non-uniform magnetic field or perturbed electric field - for the case of simple models of the human body, exposed to uniform electric fields. The coupling facto...view more

    • sale 10% off
    • Standard
      57 pages
      English language
    • e-Library read for
      1 day

This basic standard applies to Base Stations as defined in Clause 4, operating in the frequency range 110 MHz to 40 GHz. The objective of this basic standard is to specify, for such equipment and when it is put into service in its operational environment, the methods to assess the value of the Total Exposure Ratio or to establish whether the Total Exposure Ratio is less than or equal to one in relevent areas where the general public has access.

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This standard applies to a broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The objective of the standard is to specify, for such equipment operating in typical conditions, the method for assessment of compliance distances according to the basic restrictions (directly or indirectly via compliance with reference levels) related to human exposure to radio frequency electromagnetic fields.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This product standard applies to fixed stand alone broadcast transmitter operating in the frequency range 30 MHz to 40 GHz when put on the market. The term broadcast transmitter covers fixed stand alone broadcast transmitters intended for use with external antennas of the same or an other manufacturer. The object of this standard is to demonstrate the compliance of such equipment with the reference levels or the basic restrictions related to public exposure to radio frequency electromagnetic fie...view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

Provides means for demonstrating compliance with the basic restrictions on human exposure to low and intermediate frequency electric and magnetic fields specified in exposure standards or guidelines such as those produced by IEEE and ICNIRP. The object of EN 62226 is - to propose a more realistic approach to the modelling of the human exposure to low frequency electric and magnetic fields, using a set of models of growing complexity for the field emission source, or the human body or both; - to ...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This part of EN 62226 introduces the coupling factor K, to enable exposure assessment for complex exposure situations, such as non-uniform magnetic field or perturbed electric field. The coupling factor K has different physical interpretations depending on whether it relates to electric or magnetic field exposure. The aim of this part is to define in more detail this coupling factor K, for the case of simple models of the human body, exposed to non-uniform magnetic fields. It is thus called coup...view more

    • sale 10% off
    • Standard
      59 pages
      English language
    • e-Library read for
      1 day

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or integrated into garments. The applicable frequency range is from 30 MHz to 6 GHz.
The objective of this standard is to demonstrate the compliance of such devices with th...
view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day