83.160.01 - Tyres in general
Tyres in general
Reifen im allgemeinen
Pneumatiques en général
Avtomobilske pnevmatike na splošno
General Information
This document specifies a method for the determination of low specific surface area of powders ELTs rubber by measuring the amount of physically adsorbed krypton gas and applying the theoretical multipoint Brunnauer, Emmett and Teller (BET) method.
This document defines a specific method for powders taking into account that, in order to obtain an accurate value of specific surface area, a representative sample of the material to be tested is taken according to the principle that every particle ...view more
- Technical specification10 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical specification10 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides criteria for the sorting of whole end-of-life tyres (WELT) into different classes based on categories. It also provides criteria for the determination of their suitability to be used in recycling and material recovery processes.
The processes described in this document include sorting WELTs in order to determine their acceptance in recovery and recycling processes.
Criteria regarding the reuse of tyres to be mounted again in a vehicle are not addressed in this document.
...view more
- Technical specification15 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical specification15 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard1 pageFrench language
sale 15% off- Standard1 pageEnglish language
sale 15% off- Draft1 pageFrench language
sale 15% off- Draft1 pageEnglish language
sale 15% off
- Standard1 pageEnglish language
sale 15% off- Standard2 pagesFrench language
sale 15% off- Standard2 pagesFrench language
sale 15% off- Draft1 pageEnglish language
sale 15% off
The purpose of this Technical Report is to provide a review of the studies that were performed on odour of ELT granulates
- Technical report10 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical report10 pagesEnglish language
sale 10% off- e-Library read for1 day
The purpose of this Technical Report is to provide information about a procedure based on the determination of a visual index correlated with the content of textile fibers, free and bounded to the rubber, of granulates. This approach is currently used by Spanish grinders in order to control the efficiency of their processes and is effective for granulates with particle sizes whose bottom limit is higher than 0,5 mm and upper limit lower than 10 mm.
- Technical report26 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical report26 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies RFID tyre tag classification of the different technologies (embedding, patching, sticking) to benefit the user's understanding of their differences, targets, possible applications as well as their limitations. This document includes: — generic description of the main features for each technology; — marking recommendation. This document excludes: — references to items related to tyre quality and the testing thereof; — detailed references to embedded locations; — detailed r...view more
- Standard6 pagesFrench language
sale 15% off- Standard6 pagesEnglish language
sale 15% off
This document defines the test methods for validating the conformance of RFID enabled tyres with the minimum reading distance specifications given in ISO 20909. The two presented methodologies give comparable test results only when the same radio frequency and energy power parameters are used. Unless otherwise specified, the tests in this document are to be applied exclusively to a standalone RFID enabled tyre. This document is not intended to set any requirement on mass production quality contr...view more
- Standard15 pagesFrench language
sale 15% off- Standard15 pagesEnglish language
sale 15% off
This document defines the essential dimensions and the designation of tube valves and tubeless valves. Annex B gives the correspondence between ISO designations and the designations established by: — TRA (Tire and Rim Association Inc.); — ETRTO (European Tyre and Rim Technical Organisation); — JATMA (The Japan Automotive Tyre Manufacturer's Association, Inc.). In the remainder of this document, all the dimensions are given at their nominal value except in cases where the tolerances are indicated...view more
- Standard105 pagesEnglish language
sale 15% off- Standard105 pagesFrench language
sale 15% off
This document specifies test methods for TPMS snap-in tubeless valves. These methods are defined to determine the minimum level of performances requested.
- Standard12 pagesFrench language
sale 15% off- Standard11 pagesEnglish language
sale 15% off
This document specifies the terms and definitions, general requirements and data structure for coding radio frequency identification (RFID) tyre tags.
- Standard12 pagesFrench language
sale 15% off- Standard12 pagesEnglish language
sale 15% off
This document specifies requirements for using an RFID tag to individually identify a tyre. Three RFID tyre tag technologies are considered in this document: embedded, patch, sticker. Tyre tags can be used for all tyre categories.
- Standard7 pagesFrench language
sale 15% off- Standard7 pagesEnglish language
sale 15% off
This document provides two different methods for the quantitative estimation of non-metallic content remaining adhered to the steel wire obtained from the recovery of materials from end-of-life tyres.
The pyrolysis method is considered as the reference method while the hydrostatic method is considered as an in-situ method.
This European Standard includes sample collection and the preparation of representative samples based on a sampling plan for the purpose of their characterization.
This Eur...view more
- Technical specification23 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for the identification of the elastomers in granulates or powder derived from End-of-Life Tyres.
The method specified is a qualitative method only.
- Technical specification10 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides two different methods for the quantitative estimation of non-metallic content remaining adhered to the steel wire obtained from the recovery of materials from end-of-life tyres.
The pyrolysis method is considered as the reference method while the hydrostatic method is considered as an in-situ method.
This European Standard includes sample collection and the preparation of representative samples based on a sampling plan for the purpose of their characterization.
This Eur...view more
- Technical specification23 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for the identification of the elastomers in granulates or powder derived from End-of-Life Tyres.
The method specified is a qualitative method only.
- Technical specification10 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard provides general definitions for sample collection and preparation of a representative sample based on a sampling plan for the purpose of determining dimensions and impurities.
This Standard does not cover the operational performance or fitness for use of the materials which are deemed to be a function of agreements between the manufacturer and the customer.
This Standard does not purport to address all of the safety concerns, if any, associated with its use. This Standa...view more
- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard provides test methods for the determination of the dimension(s) of granulates and powders, produced from all categories of end-of-life tires at all steps of the treatment processes as well as for the determination of impurities (including free steel and free textile content).
The methods described in this Standard include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining dimensions and impurities.
Thi...view more
- Standard29 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard provides test methods for the determination of the dimension(s) of shreds, cuts and chips (including protruding filaments) produced from all categories of end-of-life tyres at all steps of the treatment processes.
The methods described in this Standard include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining dimensions.
This Standard does not cover the operational performance or fitness for use of th...view more
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
This standard provides test methods for the determination of the particle size distribution of granulates and powders, produced from all categories of end-of-life tyres at all steps of the treatment processes as well as for the determination of impurities (including free steel and free textile content).
The methods described in this standard include sample collection and the preparation of a representative sample based on a sampling plan for the purpose of determining particle size distribution...view more
- Standard29 pagesEnglish language
sale 10% off- e-Library read for1 day