Latest Standards

Collection of latest standard from ISO, IEC, CEN, CENELEC, ETSI, and SIST.

This European Standard specifies requirements for the;
-   approval of training facilities, testing and maintaining the skills of aluminothermic welders and welding trainers. It applies to those aluminothermic welding processes compliant with the requirements of EN 14730-1. It requires that the system for training and testing of welders shall be approved by the railway authority.
-   approval of aluminothermic welding contractors. It applies to those contractors using aluminothermic welding proces...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      21 pages
      English language
    • e-Library read for
      1 day

MINOR REVISION

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day

This part of ISO 8437 provides information on national and regional provisions applicable to powered walk-behind
and ride-on snow throwers. It is not intended to apply to hand-held snow throwers nor to airport, highway,
agricultural or other types of snow removal machines and equipment.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day

This document addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for “physical security” within EN 50600 1 in support of availability.
This document specifies requirements and recommendations for the following:
a)   location and site selection (taking in to account natural environment and adjacencies);
b)   protection from environmental risks;
c)   site configuration;
d)   building construction;
e)   bu...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day

This document addresses the physical security of data centres based upon the criteria and classifications for “availability”, “security” and “energy efficiency enablement” within EN 50600 1.
This document provides designations for the data centres spaces defined in EN 50600 1.
This document specifies requirements and recommendations for those data centre spaces, and the systems employed within those spaces, in relation to protection against:
a)   unauthorized access addressing organizational an...
view more

    • sale 10% off
    • Standard
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power.

    • sale 10% off
    • Amendment
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      15 pages
      English language
    • e-Library read for
      1 day

This Part of EN 10217 specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
NOTE   Once this document is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, pressure equipment directive, presumption of conformity...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      41 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60068 specifies methods of test applicable to specimens which, during transportation, storage or in service, can be subjected to low air pressure. The object of the low air pressure test is to determine the ability of components, equipment or other articles to be used, transported or stored at low air pressure. Components, equipment or other articles to be used, transported or stored under a simultaneous combination of high or low temperature and low air pressure, where the comb...view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document describes the elements of recruitment in the recruitment, mobility and turnover cluster. This document provides the formulae for comparable measures for internal and external reporting. This document also highlights issues that need to be considered when interpreting the recruitment data, especially when deciding on the appropriate intervention internally and when reporting these to external stakeholders, such as regulators and investors.

    • sale 15% off
    • Technical specification
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language

Is intended for guidance in estimating the permissible values for temperature and temperature rise of component parts of electrical equipment carrying current under steady state conditions.[
]The present report is intended to supply:[
]- general data on the structure of electric contacts and the calculation of their ohmic resistance;[
]- the basic ageing mechanisms of contacts;[
]- the calculation of the temperature rise of contacts and connection terminals;[
]- the maximum 'permi...
view more

    • sale 10% off
    • Technical report
      59 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and their test methods for tissue punches used with a handpiece in dentistry especially for oral surgical implant procedures, such as cutting holes or notches in and removing of gingival tissue. It also specifies the requirements for their marking and labelling.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

This document specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Draft
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      French language

This document specifies methods of test for joints with a locked socket and spigot, including double-socket joints, and with elastomeric seals, for buried and above-ground glass-reinforced thermosetting plastics (GRP) piping systems. It covers methods of testing for leaktightness and resistance to damage of the joint only, when subjected to specified combinations of angular movement, compression (deformation) perpendicular to the pipe axis and internal pressure. It assumes that the joint will be...view more

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      English language

This document specifies a method for the determination of the cured thickness depth of cure of one-component sealants using a taper-wedge-shaped groove test method.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

This document specifies the procedure for measuring the spectral reflectance of fine ceramic thin films in an environment with variable relative humidity by using a general-purpose spectrophotometer.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      English language

This document specifies a method of improving test result comparability by evaluating the stresses in the bearing layers leading to fatigue (see Annex A). A similar evaluation is required in practical applications. Because the stresses are the result of pressure build-up in the hydrodynamic film, it is essential to fully state the conditions of operation and lubrication. In addition to dynamic loading, dimensional and running characteristics, the inclusion of the following adequately defines th...view more

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      English language

This document specifies a method for the determination of the cured thickness of one-component sealants using a cylindrical cup test method.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Draft
      3 pages
      English language

This document specifies a heterogeneous format of neurophysiological waveform signals to support recording in a single persistent record package as well as interoperable exchange. The document focuses on electroencephalography (EEG) waveforms created during EEG examinations. Specific provision is made for sleep polysomnography examinations (PSG), brain death determination, evoked potentials (EP), and electromyography (EMG) studies. This document is intended for neurophysiology.

    • sale 15% off
    • Technical specification
      34 pages
      English language
    • sale 15% off
    • Draft
      32 pages
      English language

IEC 61788-17:2021 is available as IEC 61788-17:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61788-17:2021 specifies the measurements of the local critical current density (Jc) and its distribution in large-area high-temperature superconducting (HTS) films by an inductive method using third-harmonic voltages. The most important consideration for precise measurements is to determine Jc ...view more

    • sale 15% off
    • Standard
      41 pages
      English language

IEC TS 63140:2021 provides test methods for quantifying the permanent change in a monolithically integrated PV module’s power output that may result from some potential partial shade conditions. Three tests are available, representing conditions of use, misuse, and most severe misuse. This document is applicable to monolithically integrated PV modules with one series-connected cell group or with multiple series-connected cell groups that are in turn connected in parallel. This document is not ap...view more

    • sale 15% off
    • Technical specification
      14 pages
      English language

This document gives recommended values and related test methods for apparel leather, excluding furs. It also specifies the sampling and conditioning procedures of laboratory samples.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      French language
    • sale 15% off
    • Draft
      6 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      French language

IEC TS 63209-1:2021 is intended to provide information to supplement the baseline testing defined in IEC 61215, which is a qualification test with pass-fail criteria. This document provides a standardized method for evaluating longer term reliability of photovoltaic (PV) modules and for different bills of materials (BOMs) that may be used when manufacturing those modules. The included test sequences in this specification are intended to provide information for comparative qualitative analysis us...view more

    • sale 15% off
    • Technical specification
      19 pages
      English language

IEC 60086-2:2021 is applicable to primary batteries which are based on standardised electrochemical systems.
It specifies
– the physical dimensions,
– the discharge test conditions and discharge performance requirements.

    • sale 15% off
    • Standard
      58 pages
      English language

IEC 60086-1:2021 is available as IEC 60086-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60086-1:2021 is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. This document on one side specifies requirements for primary cells and batteries. On the othe...view more

    • sale 15% off
    • Standard
      97 pages
      English and French language

IEC 61968-3:2021 provides utilities with the means to supervise main substation topology (breaker and switch state), feeder topology and control equipment status through SCADA, AMI and other data sources. It also provides the means for handling network connectivity and loading conditions. Finally, it makes it possible for utilities to locate customer telephone complaints and coordinate activities of field crews with respect to planned and unplanned outages.
IEC 61968-3 specifies the information...
view more

    • sale 15% off
    • Standard
      756 pages
      English and French language

IEC TS 60695-2-20:2021 describes a test method that applies to solid electrical insulating materials of which test specimens can be provided. The test measures the time required to ignite a test specimen when it is affected by heat from an electrically heated wire wound around the test specimen. If the test specimen drips, the time at which this occurs is also recorded.
The test method can be used to provide classifications which can be used for quality assurance, the preselection of materials ...
view more

    • sale 15% off
    • Technical specification
      30 pages
      English language

IEC 60086-3:2021 is available as IEC 60086-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60086-3-5:2021 specifies dimensions, designation, methods of tests and requirements for primary batteries for watches. In several cases, a menu of test methods is given. When presenting battery electrical characteristics and/or performance data, the manufacturer specifies which test method was us...view more

    • sale 15% off
    • Standard
      24 pages
      English language

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed kn...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies the significant hazards, hazardous situations and events, common to self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, arising due to the adaptation for their use on railway networks and urban rail networks. These machines are intended for construction, maintenance and inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended and under conditions of misuse which are re...view more

    • sale 10% off
    • Standard
      86 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      79 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations.
This document applies to loader cranes designed to be installed on:
-   road vehicles, including trailers, with load carrying capability;
-   tractors (road or agricultural), where only a towed trailer has capability to carry goods;
-   demountable bodies to be carried by any of the above;
-   other types of carriers (...
view more

    • sale 10% off
    • Standard
      107 pages
      English language
    • e-Library read for
      1 day

IEC 62435-3:2020 describes the aspects of data storage that are necessary for successful use of electronic components being stored after long periods while maintaining traceability or chain of custody. It defines what sort of data needs to be stored alongside the components or dies and the best way to do so in order to avoid losing data during the storage period. As defined in this document, long-term storage refers to a duration that can be more than twelve months for products scheduled for lon...view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

IEC 62282-8-101:2020 addresses solid oxide cell (SOC) and stack assembly unit(s). It provides for testing systems, instruments and measuring methods to test the performance of SOC cell/stack assembly units for energy storage purposes. It assesses performance in fuel cell mode, in electrolysis mode and/or in reversible operation. This document is intended for data exchanges in commercial transactions between cell/stack manufacturers and system developers or for acquiring data on a cell or stack i...view more

    • sale 10% off
    • Standard
      83 pages
      English language
    • e-Library read for
      1 day

IEC 62932-2-2:2020 applies to flow battery systems for stationary applications and their installations with a maximum voltage not exceeding 1 500 V DC in compliance with IEC 62932-1. This document defines the requirements and test methods for risk reduction and protection measures against significant hazards relevant to flow battery systems, to persons, property and the environment, or to a combination of them. This document is applicable to stationary flow battery systems intended for indoor an...view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

IEC 61897:2020 is available as IEC 61897:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61897:2020 applies to aeolian vibration dampers intended for single conductors or earth wires or conductor bundles where dampers are directly attached to each subconductor. The purchaser may adopt part(s) of this document when specifying requirements for cables different from those mentioned above (...view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

IEC 62932-2-1:2020 specifies methods of test and requirements for the flow battery system (FBS) and the flow battery energy system (FBES) for the verification of their performances. This document is applicable to FBES or FBS which are designed and used for service in stationary locations (i.e. not generally to be moved from place to place). This document does not cover testing of the system for electromagnetic compatibility (EMC).

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

NEXT ACTION: PART OF A PACKAGE
2018-10-01: Positive assessment from NAC received on 2018-10-01. BT doc prepared and to be submitted to 4 weeks consultation
2018-09-14 CV: Positive assessment expected (info from NAC) but not yet uploaded on HAS Livelink folder -- BT doc for publication awaiting official assessment
2018-09-06 CV: New request for assessment sent on 2018-08-12 -- EN 60335-2-6:2015/FprA1 (PR=63514) and EN 60335-2-6:2015/FprAA (PR=62259) have been voted upon without Annex ZZ....
view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

IEC 62932-1:2020 relates to flow battery energy systems (FBES) used in electrical energy storage (EES) applications and provides the main terminology and general aspects of this technology, including terms necessary for the definition of unit parameters, test methods, safety and environmental issues.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

IEC 61854:2020 is available as IEC 61854:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61854:2020 applies to spacers for conductor bundles of overhead lines. It covers rigid spacers, flexible spacers and spacer dampers. It does not apply to interphase spacers, hoop spacers and bonding spacers. This document is written to cover the line design practices and spacers most commonly used at...view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This document specifies the mechanical and physical properties of bolts, screws and studs, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for fasteners.
The term "fasteners" is used in this document when bolts, screws and studs are considered all together.
ISO 3...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day

This document sets out the general principles for the extended application of test results obtained on fire resisting and smoke control doorsets, e.g. the types of pedestrian and industrial doors, operable fabric curtains and openable windows listed in the Introduction above when tested in accordance with EN 1634-1 and/or EN 1634-3.
This document provides the general principles which are intended to be used in conjunction with the relevant part of EN 15269 depending upon the specific product ty...
view more

    • sale 10% off
    • Corrigendum
      2 pages
      English language
    • e-Library read for
      1 day

This document specifies safety requirements and their verification for design and construction of, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components or by separate integrated i...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day