CEN/CLC/TR 17603-10-03:2022
(Main)Space engineering - Testing guidelines
Space engineering - Testing guidelines
This handbook provides additional information for the application of the Testing standard EN 16603-10-03.
This handbook will be the guideline for all space projects, related equipment and complete systems, by providing background information that aids the reader to better understand and meet the requirements of the standard.
The document would follow the flow of the Testing standard and in particular w hatever is excluded from the testing standard (see Scope of EN 16603-10-03) should also be excluded.
NOTE: EN 16603-10-03:2014 will be in parallel also updated to take into account the new TR.
Raumfahrttechnik - Prüfrichtlinien
Ingénierie spatiale - Lignes directrices pour les essais
Vesoljska tehnika - Smernice za preskušanje
Ta priročnik vsebuje dodatne informacije za uporabo standarda za preskušanje EN 16603-10-03.
Uporabljal se bo kot smernica za vse vesoljske projekte, povezano opremo in celovite sisteme, saj zagotavlja osnovne informacije, ki bodo bralcu pomagale bolje razumeti in izpolnjevati zahteve standarda.
Ta dokument bi moral slediti strukturi standarda za preskušanje, zlasti pa je iz njega priporočljivo izključiti vse, kar je izključeno tudi iz standarda za preskušanje (glej področje uporabe standarda EN 16603-10-03).
OPOMBA: Standard EN 16603-10-03:2014 se bo tudi sproti posodabljal tako, da bo v njem upoštevano novo tehnično poročilo (TR).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/CLC/TR 17603-10-03:2022
01-oktober-2022
Vesoljska tehnika - Smernice za preskušanje
Space engineering - Testing guidelines
Raumfahrttechnik - Prüfrichtlinien
Ingénierie spatiale - Lignes directrices pour les essais
Ta slovenski standard je istoveten z: CEN/CLC/TR 17603-10-03:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST-TP CEN/CLC/TR 17603-10-03:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/CLC/TR 17603-10-03:2022
---------------------- Page: 2 ----------------------
SIST-TP CEN/CLC/TR 17603-10-03:2022
CEN/CLC/TR 17603-10-03
TECHNICAL REPORT
RAPPORT TECHNIQUE
TECHNISCHER REPORT August 2022
ICS 49.140
English version
Space engineering - Testing guidelines
Ingénierie spatiale - Lignes directrices pour les essais Raumfahrttechnik - Prüfrichtlinien
This Technical Report was approved by CEN on 16 August 2021. It has been drawn up by the Technical Committee CEN/CLC/JTC
5.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. CEN/CLC/TR 17603-10-03:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/CLC/TR 17603-10-03:2022
CEN/CLC/TR 17603-10-03:2022
Table of contents
European Foreword . 10
Introduction . 11
1 Scope . 12
2 References . 13
3 Terms, definitions and abbreviated terms . 15
3.1 Terms from other documents . 15
3.2 Terms specific to the present document . 15
3.2.1 dummy . 15
3.3 Abbreviated terms. 16
4 General requirements. 21
4.1 Test programme . 21
4.1.1 Test programme basics . 21
4.1.2 Specific tests . 23
4.1.3 Risks during testing . 23
4.1.4 Overtesting . 24
4.1.5 Test effectiveness . 25
4.2 Development test prior to qualification . 25
4.3 Test management . 26
4.3.1 General . 26
4.3.2 Test reviews . 27
4.3.3 Test documentation . 29
4.3.4 Anomaly or failure during testing . 40
4.3.5 Test data . 40
4.4 Test conditions, input tolerances, and measurement uncertainties . 41
4.4.1 Test conditions . 41
4.4.2 Test input tolerances . 42
4.4.3 Measurement uncertainties . 42
4.5 Test objectives .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.