EN 4400-3:2019
(Main)Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of aluminium and aluminium alloy, bar and section, produced by extrusion, rolling or drawing. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Aluminium und Aluminium- und Magnesiumlegierungen - Technische Lieferbedingungen - Teil 3: Stangen und Pressprofile aus Aluminium und Aluminiumlegierungen
Diese Europäische Norm legt die Anforderungen für die Bestellung, Herstellung, Prüfung, Inspektion und Lieferung von Stangen und Pressprofilen aus Aluminium und Aluminiumlegierungen fest, die per Strangziehen, Walzen oder Ziehen hergestellt werden. Sie ist anzuwenden, sofern auf sie verwiesen wird, sowie in Verbindung mit der EN-Werkstoffnorm, sofern in der Zeichnung, Bestellung oder Prüfanweisung nicht anders festgelegt.
Série aérospatiale - Aluminium et alliages d'aluminium et magnésium - Spécification technique - Partie 3 : Barres et profilés en aluminium et alliages d’aluminium
Aeronavtika - Aluminij in aluminijeve in magnezijeve zlitine - Tehnične specifikacije - 3. del: Aluminij in aluminijeve palice in profili
Ta evropski standard opredeljuje zahteve za naročanje, proizvodnjo, preskušanje, pregled ter dobavo aluminija in aluminijevih palic in profilov, izdelanih z ekstrudiranjem, valjanih ali vlečenih. Uporablja se, kadar se nanj sklicuje, in v povezavi s standardom za materiale EN, razen če je na skici, naročilu ali razporedu pregledov navedeno drugače.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4400-3:2019
01-junij-2019
1DGRPHãþD
SIST EN 2070-1:2001
SIST EN 2070-1:2001/A1:2001
SIST EN 2070-3:2001
$HURQDYWLND$OXPLQLMLQDOXPLQLMHYHLQPDJQH]LMHYH]OLWLQH7HKQLþQH
VSHFLILNDFLMHGHO$OXPLQLMLQDOXPLQLMHYHSDOLFHLQSURILOL
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical
specification - Part 3: Aluminium and aluminium alloy bar and section
Luft- und Raumfahrt - Aluminium und Aluminium- und Magnesiumlegierungen -
Technische Lieferbedingungen - Teil 3: Stangen und Pressprofile aus Aluminium und
Aluminiumlegierungen
Série aérospatiale - Aluminium et alliages d'aluminium et magnésium - Spécification
technique - Partie 3 : Barres et profilés en aluminium et alliages d’aluminium
Ta slovenski standard je istoveten z: EN 4400-3:2019
ICS:
49.025.20 Aluminij Aluminium
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 4400-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4400-3:2019
---------------------- Page: 2 ----------------------
SIST EN 4400-3:2019
EN 4400-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 49.025.20 Supersedes EN 2070-1:1989, EN 2070-3:1989
English Version
Aerospace series - Aluminium and aluminium- and
magnesium- alloys - Technical specification - Part 3:
Aluminium and aluminium alloy bar and section
Série aérospatiale - Aluminium et alliages d'aluminium Luft- und Raumfahrt - Aluminium und Aluminium- und
et magnésium - Spécification technique - Partie 3 : Magnesiumlegierungen - Technische
Barres et profilés en aluminium et alliages Lieferbedingungen - Teil 3: Stangen und Pressprofile
d'aluminium aus Aluminium und Aluminiumlegierungen
This European Standard was approved by CEN on 28 August 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4400-3:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4400-3:2019
EN 4400-3:2019 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Wording of order . 8
5 Health and safety . 8
6 Technical requirements . 8
Annex A (normative) Orientation and location of tensile test pieces in bar and sections . 35
Annex B (normative) Orientation and location of bearing stress specimens in bar and sections . 37
2
---------------------- Page: 4 ----------------------
SIST EN 4400-3:2019
EN 4400-3:2019 (E)
European foreword
This document (EN 4400-3:2019) has been prepared by the A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.