EN ISO 11125-5:2018
(Main)Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018)
This document specifies test methods for the determination of the percentage of defective particles and of the microstructure of metallic blast-cleaning abrasives.
This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning.
The types of metallic abrasive and requirements on each are contained in the various parts of ISO 11124.
The ISO 11124 and ISO 11125 series have been drafted as a coherent set of International Standards on metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für metallische Strahlmittel - Teil 5: Bestimmung des Anteils an defekten Körnern und des Gefüges (ISO 11125-5:2018)
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 5: Détermination du pourcentage de particules défectueuses et de la microstructure (ISO 11125-5:2018)
Le présent document spécifie des méthodes d'essai pour la détermination du pourcentage de particules défectueuses et de la microstructure des abrasifs métalliques destinés à la préparation par projection.
Ceci est l'une des parties de l'ISO 11125 traitant de l'échantillonnage et des essais des abrasifs métalliques destinés à la préparation par projection.
Le type d'abrasifs métalliques et les exigences pour chacun sont donnés dans les différentes parties de l'ISO 11124.
Les séries de normes ISO 11124 et ISO 11125 constituent une série cohérente de Normes internationales sur les abrasifs métalliques destinés à la préparation par projection. L'Annexe A donne des informations sur toutes les parties des deux séries.
Priprava jeklenih podlag pred nanašanjem barv in sorodnih premazov - Preskusne metode za kovinske granulate za peskanje - 5. del: Ugotavljanje odstotka poškodovanih delcev in mikrostrukture (ISO 11125-5:2018)
Ta dokument določa preskusno metodo za ugotavljanje odstotka poškodovanih delcev in mikrostrukture kovinskih granulatov za peskanje.
To je eden od več delov standarda ISO 11125, ki obravnavajo vzorčenje in preskušanje kovinskih granulatov za peskanje.
Vrste kovinskega granulata in zahteve za vsak granulat so določene v različnih delih standarda ISO 11124. Skupini standardov ISO 11124 in ISO 11125 sta bili pripravljeni kot skladen sklop mednarodnih standardov za kovinske granulate za peskanje. Informacije o vseh delih obeh skupin so podane v dodatku A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11125-5:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 11125-5:1997
Priprava jeklenih podlag pred nanašanjem barv in sorodnih premazov - Preskusne
metode za kovinske granulate za peskanje - 5. del: Ugotavljanje odstotka
poškodovanih delcev in mikrostrukture (ISO 11125-5:2018)
Preparation of steel substrates before application of paints and related products - Test
methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage
defective particles and of microstructure (ISO 11125-5:2018)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für metallische Strahlmittel - Teil 5: Bestimmung des Anteils an defekten
Körnern und des Gefüges (ISO 11125-5:2018)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par
projection - Partie 5: Détermination du pourcentage de particules défectueuses et de la
microstructure (ISO 11125-5:2018)
Ta slovenski standard je istoveten z: EN ISO 11125-5:2018
ICS:
25.220.10 Priprava površine Surface preparation
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
SIST EN ISO 11125-5:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11125-5:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 11125-5:2018
EN ISO 11125-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 25.220.10 Supersedes EN ISO 11125-5:1997
English Version
Preparation of steel substrates before application of paints
and related products - Test methods for metallic blast-
cleaning abrasives - Part 5: Determination of percentage
defective particles and of microstructure (ISO 11125-
5:2018)
Préparation des subjectiles d'acier avant application de Vorbereitung von Stahloberflächen vor dem Auftragen
peintures et de produits assimilés - Méthodes d'essai von Beschichtungsstoffen - Prüfverfahren für
pour abrasifs métalliques destinés à la préparation par metallische Strahlmittel - Teil 5: Bestimmung des
projection - Partie 5: Détermination du pourcentage de Anteils an defekten Körnern und des Gefüges (ISO
particules défectueuses et de la microstructure (ISO 11125-5:2018)
11125-5:2018)
This European Standard was approved by CEN on 17 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11125-5:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11125-5:2018
EN ISO 11125-5:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11125-5:2018
EN ISO 11125-5:2018 (E)
European foreword
This document (EN ISO 11125-5:2018) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsibl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.