EN 934-6:2001
(Main)Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
This European Standard specifies procedures for sampling, conformity control and evaluation of conformity, for
admixtures according to the series EN 934.
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 6: Probenahme, Konformitätskontrolle und Bewertung der Konformität
Diese Europäische Norm legt die Verfahren für die Probenahme, Konformitätskontrolle und Bewertung der Konformität, Kennzeichnung und Beschriftung von Zusatzmitteln nach der Reihe EN 934 fest.
Adjuvants pour béton, mortier et coulis - Partie 6: Echantillonnage, contrôle et évaluation de la conformité
La présente Norme européenne spécifie les procédures d'échantillonnage, contrôle et évaluation de la conformité, pour les adjuvants conformes à la série EN 934.
Kemijski dodatki za beton, malto in injekcijsko maso - 6. del: Vzorčenje, kontrola skladnosti in ovrednotenje skladnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 934-6:2002
01-september-2002
1DGRPHãþD
PSIST prEN 934-6:1998
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVRGHO9]RUþHQMHNRQWUROD
VNODGQRVWLLQRYUHGQRWHQMHVNODGQRVWL
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and
evaluation of conformity
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 6: Probenahme,
Konformitätskontrolle und Bewertung der Konformität
Adjuvants pour béton, mortier et coulis - Partie 6: Echantillonnage, contrôle et évaluation
de la conformité
Ta slovenski standard je istoveten z: EN 934-6:2001
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 934-6:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 934-6:2002
---------------------- Page: 2 ----------------------
SIST EN 934-6:2002
EUROPEAN STANDARD
EN 934-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2001
ICS 91.100.10; 91.100.30 Supersedes EN 934-6:2000
English version
Admixtures for concrete, mortar and grout - Part 6: Sampling,
conformity control and evaluation of conformity
Adjuvants pour béton, mortier et coulis - Partie 6: Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 6:
Echantillonnage, contrôle et évaluation de la conformité Probenahme, Konformitätskontrolle und Bewertung der
Konformität
This European Standard was approved by CEN on 2 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 934-6:2001 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 934-6:2002
EN 934-6:2001 (E)
Contents
page
Foreword . 2
1 Scope . 2
2 Normative references . 3
3 Terms and definitions . 3
4 Sampling . 3
5 Conformity control and evaluation of conformity . 5
Annex A (informative) Certification of factory production control . 9
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 104 "Concrete", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2002, and conflicting national standards shall be withdrawn at the latest
by January 2002.
This European Standard supersedes EN 934-6:2000.
This standard is a part of the series EN 934 "Admixtures for concrete, mortar and grout" which additionally comprises
the following parts:
Part 2: Concrete admixtures - Definitons, requirements, conformity, marking and labelling
Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking
and labelling
Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
Annex A is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This European Standard specifies procedures for sampling, conformity control and evaluation of conformity, for
admixtu
...
SLOVENSKI SIST EN 934-6
STANDARD
junij 2002
Kemijski dodatki za beton, malto in injekcijsko maso – 6. del: Vzorčenje,
kontrola skladnosti in ovrednotenje skladnosti (istoveten EN 934-6:2001)
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control
and evaluation of conformity
Adjuvants pour béton, mortier et coulis - Partie 6: Enchantillonnage, contrôle et
évaluation de la conformité
Zusatzmittel für Beton, Mörtel und Einpressmörtel -Teil 6: Probenahme,
Konformitätskontrolle und Bewertung der Konformität
Deskriptorji:
Referenčna številka
ICS 91.100.10; 91.100.30 SIST EN 934-6:2002 (sl)
Nadaljevanje na straneh II in od 1 do 8
© 2003-02. Slovenski prevod standarda je izdal in založil Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 934-6 : 2002
NACIONALNI UVOD
Standard SIST EN 934-6 (sl), Kemijski dodatki za beton, malto in injekcijsko maso – 6. del: Vzorčenje,
kontrola skladnosti in ovrednotenje skladnosti, 2002, ima status slovenskega standarda in je istoveten
evropskemu standardu EN 934-6 Admixtures for concrete, mortar and grout - Part 6: Sampling,
conformity control and evaluation of conformity, julij 2001.
NACIONALNI PREDGOVOR
Evropski standard EN 934-6:2001 je pripravil tehnični odbor Evropskega komiteja za standardizacijo
CEN/TC 104 Beton.
Pripravo tega standarda sta CEN poverila Evropska komisija in Evropsko združenje za prosto
trgovino. Ta evropski standard ustreza bistvenim zahtevam evropskih direktiv.
Slovenski tehnični pododbor SIST/TC BBB/SC 8 Voda in dodatki je dne 2002-06-14 privzel evropski
standard EN 934-6:2001 po metodi ponatisa. Standard v slovenskem jeziku je le jezikovna različica.
ZVEZE S STANDARDI
S prevzemom tega evropskega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku.
PREDHODNA IZDAJA
PSIST prEN 934-6:1998 (en) Kemijski dodatki za beton, malto in injekcijsko maso – 6. del:
Vzorčenje, kontrola kakovosti, obvladovanje skladnosti, označevanje
in obeleževanje
OPOMBI
– Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v
SIST EN 934-6:2002 to pomeni “slovenski standard”.
– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
– Ta nacionalni dokument je istoveten EN 934-6:2001 in je objavljen z dovoljenjem
CEN
Rue de Stassart, 36
1050 Bruselj
Belgija
This national document is identical with EN 934-6:2001 and is published with the permission of
CEN
Rue de Stassart, 36
1050 Bruxelles
Belgium
II
---------------------- Page: 2 ----------------------
EVROPSKI STANDARD EN 934-6
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM julij 2001
ICS: 91.100.10; 91.100.30
Slovenska izdaja
Kemijski dodatki za beton, malto in injekcijsko maso –
6. del: Vzorčenje, kontrola skladnosti in ovrednotenje skladnosti
Admixtures for concrete, mortar Zusatzmittel für Beton, Mörtel und Adjuvants pour béton,
and grout - Part 6: Sampling, Einpressmörtel – Teil 6: mortier et coulis - Partie 6:
conformity control and evaluation Probenahme, Konformitätskontrolle Enchantillonnage, contrôle
of conformity und Bewertung der Konformität et évaluation de la
conformité
Ta evropski standard je 2. maja 2001 odobril CEN.
Člani CEN morajo ravnati v skladu s poslovnikom CEN/CENELEC, ki določa pogoje, pod katerimi dobi
ta standard status nacionalnega standarda brez kakršnih koli sprememb. Sezname najnovejših izdaj
teh nacionalnih standardov in njihove bibliografske podatke je možno dobiti na zahtevo pri Centralnem
sekretariatu ali članih CEN.
Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski, nemški). Izdaje v drugih
jezikih, ki jih članice CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Centralnem
sekretariatu CEN, veljajo kot uradne izdaje.
Člani CEN so nacionalne organi za standarde Avstrije, Belgije, Češke republike, Danske, Finske,
Francije, Grčije, Irske, Islandije, Italije, Luksemburga, Nemčije, Nizozemske, Norveške, Portugalske,
Španije, Švedske, Švice in Združenega kraljestva.
CEN
Evropski komite za standardizacijo
European Committee for Standardization
Europäisches Komitee für Normung
Comité Européen de Normalisation
Centralni sekretariat: Rue de Stassart 36, B-1050 Bruselj
© 2001 CEN Lastnice avtorskih pravic so vse države članice CEN Ref. št. EN 934-6:2001 E
---------------------- Page: 3 ----------------------
SIST EN 934-6 : 2002
VSEBINA Stran
Predgovor .3
1 Obseg in področje uporabe.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.