FprEN 17692
(Main)Central heating boilers - Specification for indirectly heated unvented (closed) pressurized buffer tanks - Requirements, testing and marking
Central heating boilers - Specification for indirectly heated unvented (closed) pressurized buffer tanks - Requirements, testing and marking
This document specifies the essential terms, constructional requirements, tests, energy assessment and marking of indirectly heated water storage tanks for primary water (buffer tanks), with a capacity not exceeding 2,000 l, an operating temperature not exceeding 95 °C, and an operating pressure not exceeding 1,0 MPa (10 bar).
This document covers metallic and plastic made buffer tanks.
Although this document does not consider any buffer tanks mainly intended for direct firing, it allows for the provision of electric heating elements for auxiliary purposes.
NOTE The energy assessment is performed by EN 15332 or EN 12897.
Zentralheizungskessel - Beschreibungen für indirekt beheizte, unbelüftete (geschlossene), unter Druck stehende Pufferspeicher - Anforderungen, Prüfung und Kennzeichnung
Dieses Dokument enthält Festlegungen zu wesentlichen Begriffen, bautechnischen Anforderungen, Prüfungen, energetischer Bewertung und Kennzeichnung von indirekt beheizten Heizwasserspeichern (Pufferspeichern) mit einem Nennvolumen, das 2 000 l nicht überschreitet, einer Betriebstemperatur, die 95 °C nicht überschreitet, und einem Betriebsdruck, der 1,0 MPa nicht überschreitet.
In diesem Dokument werden Pufferspeicher aus Metall und Pufferspeicher aus Kunststoff behandelt.
Obwohl in diesem Dokument keine Pufferspeicher berücksichtigt werden, die hauptsächlich für eine direkte Erwärmung vorgesehen sind, lässt dieses Dokument die Bereitstellung elektrischer Heizelemente zu Hilfszwecken zu.
ANMERKUNG Die energetische Bewertung erfolgt nach EN 15332.
Chaudières de chauffage central - Spécification principale pour ballons tampons pressurisés métalliques non ouverts à l'air libre (fermés) - Exigences, essais et marquage
Le présent document spécifie les termes essentiels, les exigences de construction, les essais, l'évaluation de la performance énergétique et le marquage des ballons de stockage d'eau primaire (ballons tampons), à chauffage indirect d'une capacité ne dépassant pas 2 000 l, une température de fonctionnement ne dépassant pas 95 °C, et une pression de fonctionnement ne dépassant pas 1,0 MPa.
Le présent document couvre les ballons tampons métalliques et en plastique.
Même si le présent document ne traite pas des ballons tampons principalement destinés au chauffage direct, il prévoit la fourniture d'éléments chauffants électriques à des fins accessoires.
NOTE L'évaluation de la performance énergétique est effectuée conformément à l'EN 15332.
Kotli za centralno ogrevanje - Glavna specifikacija za posredno ogrevane, neprezračevane (zaprte) kovinske rezervoarje pod tlakom - Zahteve, preskušanje in označevanje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17692:2021
01-julij-2021
Kotli za centralno ogrevanje - Glavna specifikacija za posredno ogrevane,
neprezračevane (zaprte) kovinske rezervoarje pod tlakom - Zahteve, preskušanje
in označevanje
Central heating boilers - Main specification for indirectly heated unvented (closed)
metallic pressurized buffer tanks - Requirements, testing and marking
Zentralheizungskessel - Beschreibungen für indirekt beheizte, unbelüftete
(geschlossene), metallene unter Druck stehende Pufferspeicher - Anforderungen,
Prüfung und Kennzeichnung
Ta slovenski standard je istoveten z: prEN 17692
ICS:
27.060.30 Grelniki vode in prenosniki Boilers and heat exchangers
toplote
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 17692:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17692:2021
---------------------- Page: 2 ----------------------
oSIST prEN 17692:2021
DRAFT
EUROPEAN STANDARD
prEN 17692
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 91.140.10
English Version
Central heating boilers - Main specification for indirectly
heated unvented (closed) metallic pressurized buffer
tanks - Requirements, testing and marking
Zentralheizungskessel - Beschreibungen für indirekt
beheizte, unbelüftete (geschlossene), metallene unter
Druck stehende Pufferspeicher - Anforderungen,
Prüfung und Kennzeichnung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 57.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17692:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17692:2021
prEN 17692:2021 (E)
Contents Page
European foreword . 4
4.1 General. 7
4.1.1 Pressure resistance general . 7
4.1.2 Pressure resistance of the shell . 7
4.1.3 Pressure resistance of the secondary system of the buffer tank . 7
4.1.4 Pressure resistance of the heat exchanger(s) . 7
4.2 Durability . 8
4.2.1 Durability of the shell . 8
4.2.2 Durability of the drinking water circuit . 8
4.2.3 Leak tightness . 8
4.2.4 Risk assessment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.