iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 9239-1

(Main)

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239‑1:2024)

Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239‑1:2024)

This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required.
This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.

Prüfungen zum Brandverhalten von Bodenbelägen - Teil 1: Bestimmung des Brandverhaltens bei Beanspruchung mit einem Wärmestrahler (ISO/DIS 9239‑1:2024)

Essais de réaction au feu des revêtements de sol - Partie 1: Détermination du comportement au feu à l'aide d'une source de chaleur rayonnante (ISO/DIS 9239‑1:2024)

Preskusi odziva talnih oblog na ogenj - 1. del: Ugotavljanje obnašanja pri gorenju z uporabo sevalnega vira toplote (ISO/DIS 9239-1:2024)

General Information

Status
Not Published
Publication Date
26-Oct-2025
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
97.150 - Floor coverings
Technical Committee
CEN/TC 127 - Fire safety in buildings
Drafting Committee
CEN/TC 127 - Fire safety in buildings
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
28-Mar-2024
Completion Date
28-Mar-2024
Ref Project
oSIST prEN ISO 9239-1:2024 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO/DIS 9239-1:2024)

Relations

Revises
EN ISO 9239-1:2010 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
Effective Date
17-Aug-2022

Buy Standard

prEN ISO 9239-1:2024prEN ISO 9239-1:2024
PreviousNext
Draft
prEN ISO 9239-1:2024
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 9239-1:2024
01-maj-2024
Preskusi odziva talnih oblog na ogenj - 1. del: Ugotavljanje obnašanja pri gorenju
z uporabo sevalnega vira toplote (ISO/DIS 9239-1:2024)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using
a radiant heat source (ISO/DIS 9239-1:2024)
Prüfungen zum Brandverhalten von Bodenbelägen - Teil 1: Bestimmung des
Brandverhaltens bei Beanspruchung mit einem Wärmestrahler (ISO/DIS 9239-1:2024)
Essais de réaction au feu des revêtements de sol - Partie 1: Détermination du
comportement au feu à l'aide d'une source de chaleur rayonnante (ISO/DIS 9239-
1:2024)
Ta slovenski standard je istoveten z: prEN ISO 9239-1
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
97.150 Talne obloge Floor coverings
oSIST prEN ISO 9239-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9239-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9239-1:2024
DRAFT
International
Standard
ISO/DIS 9239-1
ISO/TC 92/SC 1
Reaction to fire tests for floorings —
Secretariat: BSI
Part 1:
Voting begins on:
Determination of the burning 2024-03-27
behaviour using a radiant heat
Voting terminates on:
2024-06-19
source
Essais de réaction au feu des revêtements de sol —
Partie 1: Détermination du comportement au feu à l'aide d'une
source de chaleur rayonnante
ICS: 13.220.40; 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 9239-1:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9239-1:2024
DRAFT
ISO/DIS 9239-1:2024(en)
International
Standard
ISO/DIS 9239-1
ISO/TC 92/SC 1
Reaction to fire tests for floorings —
Secretariat: BSI
Part 1:
Voting begins on:
Determination of the burning
behaviour using a radiant heat
Voting terminates on:
source
Essais de réaction au feu des revêtements de sol —
Partie 1: Détermination du comportement au feu à l'aide d'une
source de chaleur rayonnante
ICS: 13.220.40; 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 9239-1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9239-1:2024
ISO/DIS 9239-1:2024(en)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9239-1:2010(Main)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
SIST EN ISO 9239-1:2010

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9239-1:2010(Main)
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
SIST EN ISO 9239-1:2010

ISO 9239-1:2010 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring. e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
ISO 9239-1:2010 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1399:1997/AC:1998(Corrigendum)
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
SIST EN 1399:1999/AC:1999

TC - Corrections to references

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1399:1997(Main)
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
SIST EN 1399:1999

This European Standard specifies two methods, for determining the resistance of resilient floor coverings to stubbed and burning cigarettes.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 56008:2024(Main)
Innovation management - Tools and methods for innovation operation measurements - Guidance (ISO 56008:2024)
SIST EN ISO 56008:2024

This document provides guidance for the definition, implementation, evaluation, and improvement of the measurements necessary to effectively manage innovation activities in an organization. It establishes the fundamentals of innovation operation measurements and guides their application towards four areas:
—     measurements for establishing and launching innovation initiatives;
—     measurements for innovation processes;
—     measurements for innovation initiatives;
—     measurements of innovation portfolios.
This document is applicable to:
—     organizations that are seeking to define and implement an innovation operations measurement approach;
—     organizations and interested parties seeking to improve the areas of accountability, transparency, and evidence-based assessment of innovation operations;
—     customers, investors, and other interested parties, seeking confidence in the organization’s innovation operations management and its results;
—     providers of training in innovation operations and measurements, including assessment of and consultancy for achieving results;
—     experts in innovation operations evaluation and impact assessment, favoring the use of a harmonized international guidance standard;
—     innovation policy makers and program managers who are looking to obtain evidence of progress and desired outcomes of innovation activities supported through public policies and programs.
All of the guidance provided within this document is generic and intended to be applicable to:
—     all types of organizations regardless of sector or size, whether they be private, public, not-for-profit, governmental or societal;
—     all types of innovations (e.g. product, service, process, model, and method) ranging from incremental to radical;
—     all types of time horizons, from short-term to long-term evaluation and measurement.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4641:2024(Main)
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2024)
SIST EN ISO 4641:2024

This document specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.
Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:
—     ambient temperatures: −25 °C to +70 °C;
—     water temperatures during operation: 0 °C to +70 °C.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12845-3:2024(Main)
Fixed firefighting systems - Automatic sprinkler systems - Part 3: Guidance for earthquake bracing
SIST EN 12845-3:2024

This document specifies requirements for earthquake protection of automatic sprinkler systems in accordance with EN 12845:2015+A1:2019.
This document applies only to locations in earthquake zones in accordance with EN 1998-1:2004, 3.2.1 and the Nationally Determined Parameters.
NOTE   The requirements in this document are based on the principle that certain peak ground acceleration values are considered as an earthquake which require special means. Attention is drawn to EN 1998-1:2004, where a peak ground acceleration above 0,08 g (0,78 m/s2) is considered an earthquake risk. Additional characteristics, NDP and/or NCI can exist in some countries as well as national annexes.
The principles defined in this document can be applicable to other water based fixed manual or automatic fire fighting systems, according to local requirements.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18847:2024(Main)
Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2024)
SIST EN ISO 18847:2024

This document specifies a method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination have to be standardized to enable comparative determinations to be made.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14456:2024(Main)
Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2024)
kSIST FprEN ISO 14456:2024

This document gives a list of FTSC (fire potential, i.e. “oxidizing power and flammability”, toxicity, state of the gas, and corrosiveness) codes determined according to the relevant properties of gases and of some liquids that are transported under pressure.
It does not cover material compatibility with gases which is covered by the ISO 11114 series.

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23402-3:2024(Main)
Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 3: Portable suction equipment (ISO 23402-3:2024)
SIST EN ISO 23402-3:2024

This document specifies terminology, classification, requirements and test methods for portable suction equipment primarily intended to be used by dental professionals in non-permanent healthcare environments.
This document applies to portable suction equipment incorporated in a portable dental unit and free-standing portable suction equipment.
The requirements in this document focus on portability.
This document specifies requirements for information to be supplied by the manufacturer on the performance, operation and maintenance of portable suction equipment designed and constructed to be transported for use in non-permanent healthcare environments. This document also specifies requirements for the instructions to be supplied by the manufacturer on assembling, disassembling and packing for human transport between non-permanent healthcare environments.
This document does not apply to stationary dental equipment, wearable equipment (such as headlamps and loupes), mobile dental equipment or portable dental equipment that is not intended to be used in non-permanent healthcare environments or not designed to be disassembled, folded or packed for human transport between non-permanent healthcare environments. Also, requirements for stationary dental equipment that can be installed in a dental mobile medical facility (e.g. vehicular or containerized mobile dental clinic) are not considered in this document.
This document specifies requirements for portable suction equipment used to provide reduced pressure and flow at the cannula connector.
This document does not apply to portable suction equipment used for life support or for scavenging halogenated anaesthetic gases.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day