EN ISO 20567-2:2023

SLOVENSKI STANDARD
SIST EN ISO 20567-2:2023
01-september-2023
Nadomešča:
SIST EN ISO 20567-2:2017
Barve in laki - Ugotavljanje odpornosti premazov proti udarcem kamenja - 2. del:
Preskus z enim udarcem vodenega telesa (ISO 20567-2:2023)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2:
Single-impact test with a guided impact body (ISO 20567-2:2023)
Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit von Beschichtungen - Teil 2:
Einzelschlagprüfung mit geführtem Schlagkörper (ISO 20567-2:2023)
Peintures et vernis - Détermination de la résistance des revêtements aux impacts de
cailloux - Partie 2: Essai de choc simple par corps percutant guidé (ISO 20567-2:2023)
Ta slovenski standard je istoveten z: EN ISO 20567-2:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 20567-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20567-2:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 20567-2:2023


EN ISO 20567-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 20567-2:2017
English Version

Paints and varnishes - Determination of stone-chip
resistance of coatings - Part 2: Single-impact test with a
guided impact body (ISO 20567-2:2023)
Peintures et vernis - Détermination de la résistance des Beschichtungsstoffe - Prüfung der Steinschlagfestigkeit
revêtements aux impacts de cailloux - Partie 2: Essai de von Beschichtungen - Teil 2: Einzelschlagprüfung mit
choc simple par corps percutant guidé (ISO 20567- geführtem Schlagkörper (ISO 20567-2:2023)
2:2023)
This European Standard was approved by CEN on 5 May 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20567-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20567-2:2023
EN ISO 20567-2:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20567-2:2023
EN ISO 20567-2:2023 (E)
European foreword
This document (EN ISO 20567-2:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20567-2:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Mac
...