Laboratory glassware - Single-volume pipettes (ISO 648:2008)

ISO 648:2008 specifies metrological and constructional requirements for volumetric pipettes with one mark (total delivery) and for volumetric pipettes with two marks, both of which are adequate for general laboratory purposes.
The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384.

Laborgeräte aus Glas - Vollpipetten (ISO 648:2008)

Diese Internationale Norm legt metrologische und bauliche Anforderungen an Vollpipetten mit einer Ringmarke (vollständige Abgabe) und mit zwei Ringmarken fest, beide geeignet für allgemeine Laborzwecke.
Die festgelegten Einzelheiten entsprechen den in ISO 384 festgelegten Grundlagen für Gestaltung und Bau von Volumenmessgeräten aus Glas.
ANMERKUNG   Für Messpipetten siehe ISO 835. Für Kolbenhubpipetten siehe ISO 8655-2.

Verrerie de laboratoire - Pipettes à un volume (ISO 648:2008)

L'ISO 648:2008 spécifie les exigences de métrologie et de construction s'appliquant aux pipettes volumétriques à un trait (à écoulement total) et aux pipettes volumétriques à deux traits, les deux types étant adaptés à un usage général en laboratoire.
Les détails spécifiés sont conformes aux principes de conception et de construction de l'ISO 384 concernant la verrerie volumétrique.

Laboratorijska steklovina - Pipete z eno oznako volumna (ISO 648:2008)

General Information

Status
Published
Publication Date
14-Oct-2008
Withdrawal Date
29-Apr-2009
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Oct-2008
Due Date
02-Apr-2010
Completion Date
15-Oct-2008

Buy Standard

Standard
EN ISO 648:2008
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 648:2008
01-december-2008
1DGRPHãþD
SIST ISO 648:1995
Laboratorijska steklovina - Pipete z eno oznako volumna (ISO 648:2008)
Laboratory glassware - Single volume pipettes (ISO 648:2008)
Laborgeräte aus Glas - Vollpipetten (ISO 648:2008)
Verrerie de laboratoire - Pipettes à un volume (ISO 648:2008)
Ta slovenski standard je istoveten z: EN ISO 648:2008
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST EN ISO 648:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 648:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 648:2008
EUROPEAN STANDARD
EN ISO 648
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 17.060

English Version
Laboratory glassware - Single-volume pipettes (ISO 648:2008)
Verrerie de laboratoire - Pipettes à un volume (ISO Laborgeräte aus Glas - Vollpipetten (ISO 648:2008)
648:2008)
This European Standard was approved by CEN on 4 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 648:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 648:2008
EN ISO 648:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 648:2008
EN ISO 648:2008 (E)
Foreword
This document (EN ISO 648:2008) has been prepared by Technical Committee ISO/TC 48 "Laboratory
glassware and related apparatus" in collaboration with Technical Committee CEN/TC 332 “Laboratory
equipment”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by April 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 648:2008 has been approved by CEN as a EN ISO 648:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 648:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 648:2008

INTERNATIONAL ISO
STANDARD 648
Second edition
2008-10-15

Laboratory glassware — Single-volume
pipettes
Verrerie de laboratoire — Pipettes à un volume




Reference number
ISO 648:2008(E)
©
ISO 2008

---------------------- Page: 7 ----------------------

SIST EN ISO 648:2008
ISO 648:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.