CEN/TS 17629:2021
(Main)Nanotechnologies - Nano- and micro- scale scratch testing
Nanotechnologies - Nano- and micro- scale scratch testing
This document specifies a method for measuring the scratch resistance and failure behaviour for advanced materials and coatings by means of nano- and micro- scale scratch experiments. The method provides data on both the physical damage to test-pieces and the friction generated between the probe and the test-piece under single pass and multiple pass conditions. The force range in these tests is from 1 μN up to 2 N.
The test method is not applicable to coatings as defined in EN ISO 4618 [18].
Nanotechnologien - Nano- und Mikro-skalige Ritzprüfung
Dieses Dokument legt ein Verfahren zur Messung der Ritzbeständigkeit und des Versagensverhaltens von modernen Werkstoffen und Beschichtungen mithilfe von nano- und mikroskaligen Ritzversuchen fest. Das Verfahren stellt sowohl Daten zur physischen Beschädigung an Proben als auch zur Reibung, die zwischen Eindringkörper und Probe bei einfachem oder mehrfachem Durchlauf erzeugt wird bereit. Der Kraftbereich dieser Prüfungen reicht von 1 µN bis zu 2 N.
Das Testverfahren ist nicht auf Beschichtungen nach EN ISO 4618 [18] anwendbar.
Nanotechnologies - Essais de rayure aux échelles nano- et micro métriques
Le présent document spécifie une méthode permettant de mesurer la résistance à la rayure et le comportement à la rupture des matériaux avancés et des revêtements, au moyen d’expériences de rayure aux échelles nano- et micro-métriques. La méthode fournit des données portant à la fois sur les dommages physiques occasionnés aux éprouvettes et sur le frottement généré entre la sonde et l’éprouvette en une seule ou plusieurs passes. Les forces à appliquer pour ces essais sont comprises entre 1 μN et 2 N.
La méthode d’essai n’est pas applicable aux revêtements tels que définis dans l’EN ISO 4618 [18].
Nanotehnologije - Nano- in mikropreskus praskanja
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17629:2021
01-september-2021
Nanotehnologije - Nano- in mikropreskus praskanja
Nanotechnologies - Nano- and micro- scale scratch testing
Nanotechnologien - Nano- und Mikro-Ritzprüfung
Nanotechnologies - Tests de résistance à l'échelle nanométrique et microscopique
Ta slovenski standard je istoveten z: CEN/TS 17629:2021
ICS:
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN/TS 17629:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17629:2021
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17629:2021
CEN/TS 17629
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
June 2021
TECHNISCHE SPEZIFIKATION
ICS 07.120
English Version
Nanotechnologies - Nano- and micro- scale scratch testing
Nanotechnologies - Essais de rayure aux échelles nano- Nanotechnologien - Nano- und Mikro-Ritzprüfung
et micro métriques
This Technical Specification (CEN/TS) was approved by CEN on 9 May 2021 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17629:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17629:2021
CEN/TS 17629:2021 (E)
Contents Page
European foreword . 3
Introduction . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 7
5 Principle . 9
5.1 General . 9
5.2 Friction . 9
5.3 Factors influencing the critical forces . 9
5.4 Multiple pass testing . 11
6 Apparatus and materials . 12
6.1 Apparatus . 12
6.2 Probes.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.