Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and circularity requirements and guidelines

This document specifies the environmental and circularity requirements for
the components of fishing gear and aquaculture equipment containing
plastics. It establishes sustainability principles that minimize the negative
impact of the plastic components of fishing gear and aquaculture equipment
on the environment, taking into account the impact on its performance (e.g.
catchability or life span). The circular and environmental design of fishing gear
and aquaculture equipment focuses on:
— The selection and sourcing of materials and components;
— manufacture and assembly;
— placement, installation and deployment of the fishing gear and aquaculture
equipment;
— use and maintenance repair; and
— the end-of-use stage.
Transport, storage and distribution are taken into account at the different
stages, where applicable.
This document excludes design aspects related to fishing or aquaculture
techniques or management.

Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 4: Umwelt- und Kreislaufanforderungen und Leitlinien

Dieses Dokument legt die Anforderungen an den Umweltschutz und die Kreislauffähigkeit für die Komponenten von Fischfanggeräten und Aquakulturausrüstungen fest, die Kunststoffe enthalten. Es legt Nachhaltigkeitsgrundsätze fest, die die negativen Auswirkungen der Kunststoffkomponenten von Fischfanggeräten und Aquakulturausrüstungen auf die Umwelt minimieren, wobei auch die Auswirkungen auf die Leistung (z. B. Fangfähigkeit oder Lebensdauer) berücksichtigt werden. Das Kreislauf- und Umweltdesign von Fischfanggeräten und Aquakulturausrüstungen stehen dabei im Vordergrund:
   Auswahl/Beschaffung von Materialien und Komponenten;
   Herstellung/Zusammenbau;
   Platzierung/Installation/Einsatz der Fanggeräte/Ausrüstung;
   Nutzung und Instandsetzung;
   Phase des Endes der Nutzungsdauer.
Transport, Lagerung und Distribution werden in den verschiedenen Phasen berücksichtigt, sofern zutreffend.
Nicht berücksichtigt: Designaspekte im Zusammenhang mit Fischerei- oder Aquakulturtechniken oder  management.

Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 4. del: Okoljske in krožne zahteve ter smernice

General Information

Status
Not Published
Publication Date
03-Sep-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
03-May-2024
Due Date
06-Mar-2024
Completion Date
03-May-2024

Buy Standard

Draft
prEN 17988-4:2023
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17988-4:2023
01-september-2023
Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 4. del: Okoljske in
krožne zahteve ter smernice
Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and
circularity requirements and guidelines
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 4: Umwelt-
und Kreislaufanforderungen und Leitlinien
Ta slovenski standard je istoveten z: prEN 17988-4
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
65.150 Ribolov in ribogojstvo Fishing and fish breeding
oSIST prEN 17988-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17988-4:2023

---------------------- Page: 2 ----------------------
oSIST prEN 17988-4:2023


DRAFT
EUROPEAN STANDARD
prEN 17988-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2023
ICS
English Version

Circular design of fishing gear and aquaculture equipment
- Part 4: Environmental and circularity requirements and
guidelines
 Kreislaufwirtschaft von Fischfanggeräten und
Aquakulturausrüstungen - Teil 4: Umwelt- und
Kreislaufanforderungen an und Leitlinien für
Fischfanggeräte und Aquakulturausrüstungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 466.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17988-4:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17988-4:2023
prEN 17988-4:2023(E)
Contents Page
European foreword . Error! Bookmark not defined.
Introduction . Error! Bookmark not defined.
1 Scope . Error! Bookmark not defined.
2 Normative references . Error! Bookmark not defined.
3 Terms and definitions. Error! Bookmark not defined.
4 Principles . Error! Bookmark not defined.
4.1 General . Error! Bookmark not defined.
4.2 Modular design using standardized components . Error! Bookmark not defined.
4.3 User (customer) requirements and needs . Error! Bookmark not defined.
4.4 Environmental conditions during use . Error! Bookmark not defined.
5 Design criteria throughout the different steps in the life cycleError! Bookmark not
defined.
5.1 Selection/ sourcing of materials and components/ parts or productsError! Bookmark
not defined.
5.2 Design for manufacture/assembly. Error! Bookmark not defined.
5.3 Design of placement/ installation/ deployment of the gear/ equipment . Error!
Book
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.