EN ISO 16484-1:2024
(Main)Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2024)
Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2024)
This document specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS).
This document specifies the phases required for the BACS project, including
— design (determination of project requirements and production of design documents including technical specifications),
— engineering (detailed function and hardware design),
— installation (installing and commissioning of the BACS), and
— completion (handover, acceptance and project finalization).
This document also specifies the requirements for as-built documentation and training.
This document is not applicable to operation and maintenance, nor is it applicable to retro or continuous commissioning, including a commissioning authority.
Systeme der Gebäudeautomation (GA) - Teil 1: Projektplanung und -ausführung (ISO 16484-1:2024)
Dieses Dokument legt Leitsätze der Projektplanung und ausführung und der Integration anderer Systeme in die GA-Systeme fest.
Es beschreibt die für ein GA-Projekt erforderlichen Phasen, wie:
Planung (Bestimmung der Projektanforderungen und Erstellen von Auslegungsdokumenten einschließlich technischer Spezifikationen);
technische Bearbeitung (en: Engineering) (detaillierte Planung der Funktionen und der Hardware);
Installation (Montage und Inbetriebnahme des GA-Systems);
Abschluss (Übergabe, Abnahme und Fertigstellung).
Dieses Dokument legt außerdem die Anforderungen an die Bestandsdokumentation und die Schulung fest.
Dieses Dokument gilt weder für die Bedienung und die Instandhaltung, noch für eine nachträgliche oder laufende Inbetriebnahme, einschließlich eines Inbetriebnahmemanagements.
Systèmes de gestion technique du bâtiment (SGTB) - Partie 1: Spécifications et mise en œuvre d'un projet (ISO 16484-1:2024)
Le présent document spécifie les principes directeurs pour la conception et la mise en œuvre du projet ainsi que pour l’intégration d’autres systèmes dans les systèmes de gestion technique du bâtiment (SGTB).
Le présent document spécifie les phases requises pour le projet de SGTB, telles que
— la conception (détermination des exigences du projet et production des documents de conception incluant les spécifications techniques),
— l’ingénierie (conception détaillée des fonctions et du matériel),
— l’installation (installation et mise en service du SGTB), et
— la finalisation (réception technique, acte de réception technique et achèvement technique du projet).
Le présent document spécifie également les exigences relatives à la documentation et à la formation conformes à l’exécution.
Le présent document ne s’applique pas au fonctionnement et à la maintenance, ni à la mise en service rétroactive ou à la mise en service continue impliquant une autorité de mise en service.
Sistemi za avtomatizacijo in regulacijo stavb - 1. del: Specifikacija projekta in izvedba (ISO 16484-1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16484-1:2024
01-april-2024
Sistemi za avtomatizacijo in regulacijo stavb - 1. del: Specifikacija projekta in
izvedba (ISO 16484-1:2024)
Building automation and control systems (BACS) - Part 1: Project specification and
implementation (ISO 16484-1:2024)
Systeme der Gebäudeautomation (GA) - Teil 1: Projektplanung und -ausführung (ISO
16484-1:2024)
Systèmes de gestion technique du bâtiment (SGTB) - Partie 1: Spécifications et mise en
oeuvre d'un projet (ISO 16484-1:2024)
Ta slovenski standard je istoveten z: EN ISO 16484-1:2024
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN ISO 16484-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16484-1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 16484-1:2024
EN ISO 16484-1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 91.040.01; 35.240.67 Supersedes EN ISO 16484-1:2010
English Version
Building automation and control systems (BACS) - Part 1:
Project specification and implementation (ISO 16484-
1:2024)
Systèmes de gestion technique du bâtiment (SGTB) - Systeme der Gebäudeautomation (GA) - Teil 1:
Partie 1: Spécifications et mise en œuvre d'un projet Projektplanung und -ausführung (ISO 16484-1:2024)
(ISO 16484-1:2024)
This European Standard was approved by CEN on 23 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16484-1:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16484-1:2024
EN ISO 16484-1:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16484-1:2024
EN ISO 16484-1:2024 (E)
European foreword
This document (EN ISO 16484-1:2024) has been prepared by Technical Committee ISO/TC 205
"Building environment design" in collaboration with Technical Committee CEN/TC 247 “Building
Automation, Controls and Building Management” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16484-1:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of IS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.