iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 19115-3:2023

(Main)

Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)

Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)

This document defines an integrated XML implementation of ISO 19115-1 and ISO 19115-2 by defining the following artefacts:
—     a set of XML schema required to validate metadata instance documents conforming to conceptual model elements defined in ISO 19115-1 and ISO 19115-2; and
—     a set of ISO/IEC 19757-3 (Schematron) rules that implement validation constraints in the ISO 19115-1 and ISO 19115-2 UML models that are not validated by the XML schema.
This document describes the procedure used to generate XML schemas from ISO geographic information conceptual models related to metadata. The XML schemas are generated directly from the conceptual UML model (8.5).

Geoinformation - Metadaten - Teil 3: XML Implementierungsschema für Metadaten-Grundsätze (ISO 19115-3:2023)

Information géographique - Métadonnées - Partie 3 : Mise en oeuvre par des schémas XML (ISO 19115-3:2023)

Le présent document définit une implémentation XML intégrée des normes ISO 19115-1 et ISO 19115-2 en précisant les artefacts suivants:
—     un ensemble de schémas XML requis pour valider les documents d'instance de métadonnées conformes aux éléments de modèle conceptuel définis dans l'ISO 19115-1 et l'ISO 19115-2; et
—     un ensemble de règles basées sur l'ISO/IEC 19757-3 (Schematron) qui, dans les modèles UML de l'ISO 19115-1 et l'ISO 19115-2, implémentent des contraintes de validation qui ne sont pas validées par le schéma XML.
Le présent document décrit la procédure utilisée pour générer des schémas XML à partir de modèles ISO conceptuels d'information géographique. Les schémas XML sont générés directement à partir du modèle UML conceptuel (8.5).

Geografske informacije - Metapodatki - 3. del: Izvajanje sheme XML za temeljne koncepte (ISO 19115-3:2023)

Ta dokument določa izvajanje integrirane sheme XML iz standardov ISO 19115-1 in ISO 19115-2 z opredelitvijo
naslednjih artefaktov:
– nabor shem XML, ki je zahtevan za preverjanje, ali so dokumenti primerkov metapodatkov skladni z elementi konceptualnega
modela, opredeljenimi v standardih ISO 19115-1 in ISO 19115-2; ter
– nabor pravil iz standarda ISO/IEC 19757-3 (Schematron), ki uvajajo omejitve preverjanja v modelih UML iz standardov ISO 19115-1 in ISO 19115-2, ki se ne preverjajo s shemo XML.
Ta dokument opisuje postopek, ki se uporablja za generiranje shem XML iz konceptualnih modelov geografskih informacij ISO, ki se navezujejo na metapodatke. Sheme XML so generirane neposredno iz konceptualnega modela UML (točka 8.5).

General Information

Status
Published
Publication Date
29-Aug-2023
ICS
35.240.70 - IT applications in science
Technical Committee
CEN/TC 287 - Geographic Information
Drafting Committee
CEN/TC 287 - Geographic Information
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Aug-2023
Due Date
02-Jun-2024
Completion Date
30-Aug-2023
Ref Project
SIST EN ISO 19115-3:2024 - Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)

Buy Standard

EN ISO 19115-3:2024EN ISO 19115-3:2024
PreviousNext
Standard
EN ISO 19115-3:2024
English language
111 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19115-3:2024
01-januar-2024
Geografske informacije - Metapodatki - 3. del: Izvajanje sheme XML za temeljne
koncepte (ISO 19115-3:2023)
Geographic information - Metadata - Part 3: XML schema implementation for
fundamental concepts (ISO 19115-3:2023)
Geoinformation - Metadaten - Teil 3: XML Implementierungsschema für Metadaten-
Grundsätze (ISO 19115-3:2023)
Information géographique - Métadonnées - Partie 3 : Mise en oeuvre par des schémas
XML (ISO 19115-3:2023)
Ta slovenski standard je istoveten z: EN ISO 19115-3:2023
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19115-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19115-3:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 19115-3:2024


EN ISO 19115-3
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2023
EUROPÄISCHE NORM
ICS 35.240.70
English Version

Geographic information - Metadata - Part 3: XML schema
implementation for fundamental concepts (ISO 19115-
3:2023)
Information géographique - Métadonnées - Partie 3 : Geoinformation - Metadaten - Teil 3: XML
Mise en oeuvre par des schémas XML (ISO 19115- Implementierungsschema für Metadaten-Grundsätze
3:2023) (ISO 19115-3:2023)
This European Standard was approved by CEN on 18 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19115-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19115-3:2024
EN ISO 19115-3:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19115-3:2024
EN ISO 19115-3:2023 (E)
European foreword
This document (EN ISO 19115-3:2023) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19115-3:2023 has been a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19152-1:2024(Main)
Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic conceptual model (ISO 19152-1:2024)
SIST EN ISO 19152-1:2024

This document:
—     defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration/georegulation;
—     provides an abstract, conceptual model with packages related to:
—     parties (people and organizations),
—     basic administrative units, rights, responsibilities and restrictions (RRRs),
—     spatial units,
—     a generic conceptual model (sources and versioned object);
—     provides terminology for land administration/georegulation, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
—     provides a content model independent of encoding, allowing for the support of various encodings;
—     provides a basis for national and regional profiles;
—     enables the combining of land administration/georegulation information from different sources in a coherent manner.
The following are outside the scope of this document:
—     interference with (national) land administration/georegulation laws with potentially legal implications due to the possibility of describing different types of systems but in the same notation;
—     construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available.
This document provides the concepts and basic structure for standardization in the land administration/georegulation domain. It defines a general schema that permits regulatory information to be described. It also allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that sourcing of all information systems can be maintained. This document establishes the common elements and basic schema upon which more detailed schema can be established.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19144-2:2023(Main)
Geographic information - Classification systems - Part 2: Land Cover Meta Language (LCML) (ISO 19144-2:2023)
SIST EN ISO 19144-2:2024

This document specifies a Land Cover Meta Language (LCML) expressed as a UML metamodel that allows different Land Cover classification systems to be described based on physiognomic aspects. This document recognizes that a number of Land Cover classification systems exist. It provides a common reference structure for the comparison and integration of data for any generic Land Cover classification system, but does not intend to replace those classification systems.

  • Draft
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19160-2:2023(Main)
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO 19160-2:2023)
SIST EN ISO 19160-2:2024

This document focuses on assigning and maintaining addresses that allow the unambiguous determination of an object in the physical world for purposes of identification and location in the context of public administration and public service delivery. During assignment, an address is first associated with a particular object in the physical world. During maintenance, the address changes, for example, it is re-assigned to a different object, one or more of the address components are modified (e.g. a street name change), or the address is retired when it is no longer used. This document:
a)       specifies a good practice for assigning and maintaining addresses and address data; and
b)       specifies a governance framework for assigning and maintaining addresses and address data.
Very often local governments (e.g. municipalities) are assigned the mandate for the planning, implementation, evaluation and ongoing maintenance of addresses, and they are often supported by other organizations, such as the national government, a postal agency, private sector companies and national or regional organizations. This document is applicable to all organizations who have an interest, role or responsibility in address assignment and maintenance, for example in terms of:
—     developing legislation, policies or regulations for addressing;
—     facilitating and coordinating the naming of address components (the constituent parts of an address) and announcing and communicating these names;
—     installing address component signs in the physical world;
—     designing and implementing business processes related to address assignment and maintenance;
—     designing, implementing and maintaining access to address data;
—     developing software to facilitate the above; and
—     using addresses.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/A2:2024
  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19150-6:2023(Main)
Geographic information - Ontology - Part 6: Service ontology register (ISO 19150-6:2023)
SIST EN ISO 19150-6:2023

This document establishes a standard registration and maintenance mechanism for the registration of ISO 19150-4-conformant geographic information service ontologies.
This document makes use of ISO 19135-1 whenever appropriate.
This document does not define semantics operators or rules for ontologies, and does not develop any application ontology.
In relation to ISO 19101-1:2014, 6.2, this document defines and formalizes the following purposes of the ISO geographic information reference model:
—     geographic information service components and their behaviour for data processing purposes over the Web; and
—     OWL ontologies to cast ISO/TC 211 International Standards to benefit from and support the Semantic Web.
In relation to ISO 19101-1:2014, 8.3, this document addresses the Application:Procedural foundation of the ISO geographic information reference model.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-3:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 3: Processing fundamentals (ISO 19123-3:2023, Corrected version 2023-11)
SIST EN ISO 19123-3:2023

This document defines a coverage processing language for server-side extraction, filtering, processing, analytics, and fusion of multi-dimensional geospatial coverages representing, for example, spatio-temporal sensor, image, simulation, or statistics datacubes. Services implementing this language provide access to original or derived sets of coverage information, in forms that are useful for client-side consumption.
This document relies on the ISO 19123-1 abstract coverage model. In this edition, regular and irregular multi-dimensional grids are supported for axes that can carry spatial, temporal or any other semantics. Future editions will additionally support further axis types as well as further coverage types from ISO 19123-1, specifically, point clouds and meshes.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-1:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)
SIST EN ISO 19123-1:2023

This document defines a conceptual schema for coverages. A coverage is a mapping from a spatial, temporal or spatiotemporal domain to attribute values sharing the same attribute type. A coverage domain consists of a collection of direct positions in a coordinate space that can be defined in terms of spatial and/or temporal dimensions, as well as non-spatiotemporal (in ISO 19111:2019, “parametric”) dimensions. Examples of coverages include point clouds, grids, meshes, triangulated irregular networks, and polygon sets. Coverages are the prevailing data structures in a number of application areas, such as remote sensing, meteorology and mapping of depth, elevation, soil and vegetation. This document defines the coverage concept including the relationship between the domain of a coverage and its associated attribute range. This document defines the characteristics of the domain. The characteristics of the attribute range are not defined in this document, but are defined in implementation standards. Consequently, the standardization target of this document consists of implementation standards, not concrete implementations themselves.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19156:2023(Main)
Geographic information - Observations, measurements and samples (ISO 19156:2023)
SIST EN ISO 19156:2023

This document defines a conceptual schema for observations, for features involved in the observation process, and for features involved in sampling when making observations. These provide models for the exchange of information describing observation acts and their results, both within and between different scientific and technical communities.
Observations commonly involve sampling of an ultimate feature-of-interest. This document defines a common set of sample types according to their spatial, material (for ex situ observations) or statistical nature. The schema includes relationships between sample features (sub-sampling, derived samples).
This document concerns only externally visible interfaces and places no restriction on the underlying implementations other than what is needed to satisfy the interface specifications in the actual situation.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19157-1:2023(Main)
Geographic information - Data quality - Part 1: General requirements (ISO 19157-1:2023)
SIST EN ISO 19157-1:2023

This document establishes the principles for describing the quality of geographic data. It:
—    defines a well-considered system of components for describing data quality;
—    defines the process for defining additional, domain-specific components for describing data quality;
—    specifies components and the content structure of data quality measures;
—    describes general procedures for evaluating the quality of geographic data;
—    establishes principles for reporting data quality.
This document is applicable to data producers providing quality information to describe and assess how well a dataset conforms to its product specification and to data users attempting to determine whether or not specific geographic data are of sufficient quality for their particular application.
This document does not attempt to define minimum acceptable levels of quality for geographic data. Such information is usually present as a requirement in a data product specification, defined in accordance with ISO 19131, for example.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19131:2022(Main)
Geographic information - Data product specifications (ISO 19131:2022)
SIST EN ISO 19131:2023

This document describes requirements for the specification of geographic data products, based upon the concepts of other International Standards in the ISO 19100 family of standards. It also provides guidance in the creation of data product specifications, so that they can be easily understood and fit for their intended purpose.
This document specifies XML encoding of data product specifications.
This document provides OWL representation of the underlying UML model. See Annex F.
This document is intended for use by data producers, data providers, service providers and potential users of data products.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day