EN ISO 7214:2012
(Main)Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
ISO 7214:2012 specifies methods for testing flexible and semi-rigid cellular plastics made from polyethylene. Cellular plastics containing copolymers of ethylene or blends of polymers with polyethylene may also be tested by the procedures of this International Standard provided these materials have characteristics similar to polyethylene as described in ISO 1872-1, or copolymers of ethylene as described in ISO 4613-1.
Mandatory tests suitable for characterization of cellular polyethylene, regardless of end use, and optional tests for the determination of properties that are relevant to certain uses are described.
Schaumstoffe aus Polyethylen - Prüfverfahren (ISO 7214:2012)
1.1 Diese Internationale Norm legt Prüfverfahren für weich-elastische und halbharte Schaumstoffe aus Polyethylen fest. Schaumstoffe, die Ethylen-Copolymere oder Mischungen aus Polymeren mit Polyethylen enthalten, dürfen ebenso nach den Verfahren dieser Internationalen Norm geprüft werden, vorausgesetzt, diese Materialien haben ähnliche Eigenschaften wie Polyethylen nach ISO 1872 1 oder Ethylen-Copolymere nach ISO 4613 1.
1.2 Im Abschnitt 7 sind obligatorische Prüfverfahren festgelegt, die für die Charakterisierung der Polyethylenschaumstoffe geeignet sind, ohne die Anwendung zu berücksichtigen. Im Abschnitt 8 werden die wahlfreien Prüfverfahren zur Bestimmung von Eigenschaften, die sich auf bestimmte Einsatzgebiete beziehen, beschrieben.
Plastiques alvéolaires - Polyéthylène - Méthodes d'essai (ISO 7214:2012)
Penjeni polimerni materiali - Polietilen - Preskusne metode (ISO 7214:2012)
Ta mednarodni standard določa metode za preskušanje prožnih in poltrdih penjenih polimernih materialov iz polietilena. S postopki iz tega mednarodnega standarda se lahko preskušajo tudi penjeni polimerni materiali, ki vsebujejo kopolimere etilena ali mešanice polimerov s polietilenom, če imajo ti materiali značilnosti, podobne polietilenu, iz standarda ISO 1872-1, ali značilnosti, podobne kopolimerom etilena, iz standarda ISO 4613-1. Obvezni preskusi, ki so primerni za ugotavljanje penjenega polietilena, ne glede na njihovo končno uporabo, so opisani v točki 7. Neobvezni preskusi za ugotavljanje lastnosti, ki so pomembne za določene načine uporabe, so opisani v točki 8.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7214:2012
01-september-2012
1DGRPHãþD
SIST EN ISO 7214:2007
Penjeni polimerni materiali - Polietilen - Preskusne metode (ISO 7214:2012)
Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
Schaumstoffe aus Polyethylen - Prüfverfahren (ISO 7214:2012)
Plastiques alvéolaires - Polyéthylène - Méthodes d'essai (ISO 7214:2012)
Ta slovenski standard je istoveten z: EN ISO 7214:2012
ICS:
83.100 Penjeni polimeri Cellular materials
SIST EN ISO 7214:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7214:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 7214:2012
EUROPEAN STANDARD
EN ISO 7214
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2012
ICS 83.100 Supersedes EN ISO 7214:2007
English Version
Cellular plastics - Polyethylene - Methods of test (ISO
7214:2012)
Plastiques alvéolaires - Polyéthylène - Méthodes d'essai Schaumstoffe aus Polyethylen - Prüfverfahren (ISO
(ISO 7214:2012) 7214:2012)
This European Standard was approved by CEN on 31 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7214:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7214:2012
EN ISO 7214:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7214:2012
EN ISO 7214:2012 (E)
Foreword
This document (EN ISO 7214:2012) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at
the latest by October 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7214:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7214:2012 has been approved by CEN as a EN ISO 7214:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 7214:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 7214:2012
INTERNATIONAL ISO
STANDARD 7214
Fourth edition
2012-04-01
Cellular plastics — Polyethylene —
Methods of test
Plastiques alvéolaires — Polyéthylène — Méthodes d’essai
Reference number
ISO 7214:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 7214:2012
ISO 7214:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, wit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.