EN 13232-5:2023
(Main)Railway applications - Track - Switches and crossings for Vignole rails - Part 5: Switches
Railway applications - Track - Switches and crossings for Vignole rails - Part 5: Switches
This document:
— establishes a working definition for switches and their constituent parts and identify the main types;
— specifies the minimum requirements for the manufacture of the switches and/or constituent parts;
— specifies codes of practice for inspection and manufacturing tolerances of both full and half sets of switches and their constituent parts;
— establishes the limits and scope of supply;
— lists the methods by which switches and their parts should be identified and traced;
— lists the different and varying ways by which switches can be described using the following parameters:
— geometry of the switches;
— types of construction;
— performance requirements;
— design criteria;
— tolerances and inspection.
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 5: Zungenvorrichtungen
Dieses Dokument:
— legt Fachbegriffe für Zungenvorrichtungen und ihre einzelnen Bauteile fest und benennt ihre Hauptteile;
— legt die Mindestanforderungen an die Herstellung der Zungenvorrichtungen und/oder einzelner Bauteile fest;
— legt Ausführungsbestimmungen für die Abnahme und Fertigungstoleranzen sowohl für halbe als auch für ganze Zungenvorrichtungen und ihrer einzelnen Bauteile fest;
— legt den Lieferumfang fest;
— listet Verfahren auf, nach denen Zungenvorrichtungen und ihre einzelnen Bauteile identifiziert und rückverfolgt werden sollten;
— listet die verschiedenen Möglichkeiten auf, nach denen Zungenvorrichtungen unter Verwendung der folgenden Parameter beschrieben werden können:
— Geometrie der Zungenvorrichtungen;
— Bauarten;
— Leistungsanforderungen;
— Konstruktionskriterien;
— Grenzabweichungen und Abnahme.
Applications ferroviaires - Voie - Appareils de voie pour rails Vignole - Partie 5 : Aiguillages
Le présent document :
— établit une terminologie pour les aiguillages et leurs constituants, et identifie les principaux types d'aiguillages ;
— spécifie les exigences minimales pour la fabrication des aiguillages et de leurs constituants ;
— spécifie les codes d'usage pour les contrôles ainsi que les tolérances de fabrication pour les aiguillages, les demi-aiguillages et leurs constituants ;
— établit les limites de fourniture ;
— répertorie les méthodes d'identification et de traçabilité des aiguillages et de leurs constituants qu'il convient d'utiliser ;
— spécifie les différents moyens de décrire les aiguillages à l'aide des paramètres suivants :
— géométrie des aiguillages ;
— types de construction ;
— exigences de performance ;
— critères de conception ;
— tolérances et inspection.
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 5. del: Kretniška menjala
Področje uporabe tega evropskega standarda vključuje:
– vzpostavitev delovne definicije za kretniška menjala in njihove sestavne dele ter opredelitev glavnih vrst;
– določitev minimalnih zahtev za izdelavo kretniških menjal in/ali njihovih sestavnih delov;
– določitev pravil ravnanja v zvezi s pregledom ter toleranc tako celotnih kot polovičnih sklopov kretniških menjal in njihovih sestavnih delov;
– vzpostavitev omejitev in obsega dobave;
– navedbo metod, ki naj se uporabijo za opredelitev in sledenje kretniškim menjalom in njihovim delom;
– navedbo različnih načinov, s katerimi je mogoče opisati kretniška menjala z uporabo teh parametrov:
– geometrija kretniških menjal;
– vrste konstrukcije;
– zahteve glede zmogljivosti;
– merila za projektiranje;
– tolerance in pregled.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13232-5:2023
01-december-2023
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 5. del: Kretniška menjala
Railway applications - Track - Switches and crossings for Vignole rails - Part 5: Switches
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 5:
Zungenvorrichtungen
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 5: Aiguillages
Ta slovenski standard je istoveten z: EN 13232-5:2023
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN 13232-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13232-5:2023
---------------------- Page: 2 ----------------------
SIST EN 13232-5:2023
EN 13232-5
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13232-5:2005+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 5: Switches
Applications ferroviaires - Voie - Appareils de voie Bahnanwendungen - Oberbau - Weichen und
pour rails Vignole - Partie 5 : Aiguillages Kreuzungen für Vignolschienen - Teil 5:
Zungenvorrichtungen
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-5:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13232-5:2023
EN 13232-5:2023 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
3.1 Construction . 7
3.2 Rail joints . 8
3.3 Handing and sets of switches . 9
3.4 Parts of switch panel . 11
3.5 Small fittings . 13
3.6 Geometry terms for switches . 14
3.7 Examples of geometrical forms of switches . 18
3.8 Switch positions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.