EN 912:1999/AC:2000
(Corrigendum)Timber fasteners - Specifications for connectors for timber
Timber fasteners - Specifications for connectors for timber
TC - Addition of Tables A.1, B.1, C.1, C.5, C.10, C.11 and correction in Table A.5
Holzverbindungsmittel - Spezifikationen für Dübel besonderer Bauart für Holz
Organes d'assemblage pour le bois -Spécifications des connecteurs pour bois
Vezna sredstva za les - Specifikacije za moznike za les
General Information
Relations
This May Also Interest You
This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.
- Standard47 pagesEnglish languagesale 10% offe-Library read for×1 day
- 12-Jul-2011
- 30-Jan-2012
- 21.060.99
- 91.080.20
- CEN/TC 124
This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.
- Standard47 pagesEnglish languagesale 10% offe-Library read for×1 day
- 12-Jul-2011
- 30-Jan-2012
- 21.060.99
- 91.080.20
- CEN/TC 124
This document provides guidance for the definition, implementation, evaluation, and improvement of the measurements necessary to effectively manage innovation activities in an organization. It establishes the fundamentals of innovation operation measurements and guides their application towards four areas:
— measurements for establishing and launching innovation initiatives;
— measurements for innovation processes;
— measurements for innovation initiatives;
— measurements of innovation portfolios.
This document is applicable to:
— organizations that are seeking to define and implement an innovation operations measurement approach;
— organizations and interested parties seeking to improve the areas of accountability, transparency, and evidence-based assessment of innovation operations;
— customers, investors, and other interested parties, seeking confidence in the organization’s innovation operations management and its results;
— providers of training in innovation operations and measurements, including assessment of and consultancy for achieving results;
— experts in innovation operations evaluation and impact assessment, favoring the use of a harmonized international guidance standard;
— innovation policy makers and program managers who are looking to obtain evidence of progress and desired outcomes of innovation activities supported through public policies and programs.
All of the guidance provided within this document is generic and intended to be applicable to:
— all types of organizations regardless of sector or size, whether they be private, public, not-for-profit, governmental or societal;
— all types of innovations (e.g. product, service, process, model, and method) ranging from incremental to radical;
— all types of time horizons, from short-term to long-term evaluation and measurement.
- Standard85 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft67 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 03.100.01
- 03.100.40
- 03.100.70
- CEN/TC 389
This document specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.
Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:
— ambient temperatures: −25 °C to +70 °C;
— water temperatures during operation: 0 °C to +70 °C.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 23.040.70
- CEN/TC 218
This document specifies requirements for earthquake protection of automatic sprinkler systems in accordance with EN 12845:2015+A1:2019.
This document applies only to locations in earthquake zones in accordance with EN 1998-1:2004, 3.2.1 and the Nationally Determined Parameters.
NOTE The requirements in this document are based on the principle that certain peak ground acceleration values are considered as an earthquake which require special means. Attention is drawn to EN 1998-1:2004, where a peak ground acceleration above 0,08 g (0,78 m/s2) is considered an earthquake risk. Additional characteristics, NDP and/or NCI can exist in some countries as well as national annexes.
The principles defined in this document can be applicable to other water based fixed manual or automatic fire fighting systems, according to local requirements.
- Standard38 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft29 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 13.220.20
- CEN/TC 191
This document specifies a method for determining the particle density of compressed fuels such as pellets or briquettes. Particle density is not an absolute value and conditions for its determination have to be standardized to enable comparative determinations to be made.
- Draft20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 27.190
- 75.160.40
- CEN/TC 335
This document gives a list of FTSC (fire potential, i.e. “oxidizing power and flammability”, toxicity, state of the gas, and corrosiveness) codes determined according to the relevant properties of gases and of some liquids that are transported under pressure.
It does not cover material compatibility with gases which is covered by the ISO 11114 series.
- Draft51 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies terminology, classification, requirements and test methods for portable suction equipment primarily intended to be used by dental professionals in non-permanent healthcare environments.
This document applies to portable suction equipment incorporated in a portable dental unit and free-standing portable suction equipment.
The requirements in this document focus on portability.
This document specifies requirements for information to be supplied by the manufacturer on the performance, operation and maintenance of portable suction equipment designed and constructed to be transported for use in non-permanent healthcare environments. This document also specifies requirements for the instructions to be supplied by the manufacturer on assembling, disassembling and packing for human transport between non-permanent healthcare environments.
This document does not apply to stationary dental equipment, wearable equipment (such as headlamps and loupes), mobile dental equipment or portable dental equipment that is not intended to be used in non-permanent healthcare environments or not designed to be disassembled, folded or packed for human transport between non-permanent healthcare environments. Also, requirements for stationary dental equipment that can be installed in a dental mobile medical facility (e.g. vehicular or containerized mobile dental clinic) are not considered in this document.
This document specifies requirements for portable suction equipment used to provide reduced pressure and flow at the cannula connector.
This document does not apply to portable suction equipment used for life support or for scavenging halogenated anaesthetic gases.
- Draft16 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the compositional ranges of a series of filler metals used for brazing. The filler metals are divided into seven classes, related to their composition but not necessarily to the major element present.
NOTE 1 For the major element(s) present, see Annex A.
In the case of composite products, such as flux-coated rods, pastes or plastics tapes, this document covers only the filler metal that forms parts of such products. The melting temperatures given in the tables are only approximate, as they necessarily vary within the compositional range of the filler metal. Therefore, they are given only for information. Technical delivery conditions are given for brazing filler metals and products containing brazing filler metals with other constituents such as flux and/or binders.
NOTE 2 For some applications, such as precious metal jewellery, aerospace and dental, filler metals other than those included in this document are often used. These are covered by other International Standards to which reference can be made.
- Draft26 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 25.160.50
- CEN/TC 121
This document specifies the requirements for general-purpose textile-reinforced thermoplastics water-discharge hoses.
- Standard15 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Apr-2024
- 23.040.70
- CEN/TC 218
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.