EN 847-1:2017
(Main)Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
This European Standard specifies all hazards arising from the use of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted), integrated tools and circular saw blades.
Maschinen-Werkzeuge für Holzbearbeitung - Sicherheitstechnische Anforderungen - Teil 1: Fräs- und Hobelwerkzeuge, Kreissägeblätter
Outils pour le travail du bois - Prescriptions de sécurité - Partie 1 : Outils de fraisage, lames de scies circulaires
Orodja za obdelavo lesa - Varnostne zahteve - 1. del: Rezkalno orodje, listi krožnih žag
Ta dokument določa vse nevarnosti, ki izhajajo iz uporabe orodij za obdelavo lesa, in opisuje metode za zmanjšanje ali odpravo teh nevarnosti z zasnovo orodja in zagotavljanjem informacij. Ta dokument obravnava frezala (pritrjena v izvrtino, pritrjena na držalo), integrirana orodja in krožne žage.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 847-1:2018
01-februar-2018
Orodja za obdelavo lesa - Varnostne zahteve - 1. del: Rezkalno orodje, listi krožnih
žag
Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
Maschinen-Werkzeuge für Holzbearbeitung - Sicherheitstechnische Anforderungen - Teil
1: Fräs- und Hobelwerkzeuge, Kreissägeblätter
Outils pour le travail du bois - Prescriptions de sécurité - Partie 1 : Outils de fraisage,
lames de scies circulaires
Ta slovenski standard je istoveten z: EN 847-1:2017
ICS:
25.100.20 Orodja za frezanje Milling tools
25.100.40 Žagni listi Saws
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 847-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 847-1:2018
---------------------- Page: 2 ----------------------
SIST EN 847-1:2018
EN 847-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2017
EUROPÄISCHE NORM
ICS 79.120.10 Supersedes EN 847-1:2013
English Version
Tools for woodworking - Safety requirements - Part 1:
Milling tools, circular saw blades
Outils pour le travail du bois - Prescriptions de sécurité Maschinen-Werkzeuge für Holzbearbeitung -
- Partie 1 : Outils de fraisage, lames de scies circulaires Sicherheitstechnische Anforderungen - Teil 1: Fräs-
und Hobelwerkzeuge, Kreissägeblätter
This European Standard was approved by CEN on 21 August 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 847-1:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 847-1:2018
EN 847-1:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations for cutting materials . 11
4 List of significant hazards . 14
5 Design requirements . 14
5.1 General requirements for milling tools and circular saw blades . 14
5.2 Special requirements for milling tools for machines with hand feed . 22
6 Tool identification . 28
6.1 Marking of milling tools for integrated feed other than shank mounted tools or
integrated tools .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.