EN 62714-3:2017

SLOVENSKI STANDARD
SIST EN 62714-3:2017
01-december-2017
2EOLNDL]PHQMDYHWHKQLþQLKSRGDWNRY]DXSRUDERYLQGXVWULMVNHPLQåHQLULQJX
DYWRPDWL]DFLMHVLVWHPRY2]QDþHYDOQLMH]LN]DDYWRPDWL]DFLMRGHO*HRPHWULMD
LQNLQHPDWLND,(&
Engineering data exchange format for use in industrial automation systems engineering -
Automation Markup Language - Part 3: Geometry and kinematics (IEC 62714-3:2017)
Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme -
Automation markup language - Teil 3: Geometrie und Kinematik (IEC 62714-3:2017)
Format d'échange de données techniques pour une utilisation dans l'ingénierie des
systèmes d'automatisation industrielle - Automation markup language - Partie 3:
Géométrie et cinématique (IEC 62714-3:2017)
Ta slovenski standard je istoveten z: EN 62714-3:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.060 Jeziki, ki se uporabljajo v Languages used in
informacijski tehniki in information technology
tehnologiji
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62714-3:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62714-3:2017

---------------------- Page: 2 ----------------------

SIST EN 62714-3:2017


EUROPEAN STANDARD EN 62714-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2017
ICS 01.040.01; 25.040.01; 35.240.30

English Version
Engineering data exchange format for use in industrial
automation systems engineering - Automation markup language -
Part 3: Geometry and kinematics
(IEC 62714-3:2017)
Format d'échange de données techniques pour une Datenaustauschformat für Planungsdaten industrieller
utilisation dans l'ingénierie des systèmes d'automatisation Automatisierungssysteme - Automation markup language -
industrielle - Automation markup language - Partie 3: Teil 3: Geometrie und Kinematik
Géométrie et cinématique (IEC 62714-3:2017)
(IEC 62714-3:2017)
This European Standard was approved by CENELEC on 2017-03-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62714-3:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62714-3:2017
EN 62714-3:2017
European foreword
The text of document 65E/497/CDV, future edition 1 of IEC 62714-3, prepared by SC 65E "Devices
and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62714-3:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-12-01
national level by publication of an identical national
standard or by endorsement
(dow) 2020-03-01
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62714-3:2017 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62714-3:2017
EN 62714-3:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The foll
...