Fuel cell technologies - Part 6-107: Micro fuel cell power systems - Safety - Indirect water-reactive (Division 4.3) compounds

IEC 62282-6-107:2024 covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges using hydrogen produced from water-reactive (UN Division 4.3) compounds as fuel. These systems and units use proton exchange membrane (PEM) fuel cell technologies. The designs can include fuel processing subsystems to derive hydrogen gas from the water-reactive fuel formulation. This document only applies to water-reactive (UN Division 4.3) solid compounds which solely evolve hydrogen gas upon contact with water (or non-hazardous aqueous solutions). This document does not apply to compounds with a subsidiary hazard risk, or which are not permitted to be transported by air according to the International Civil Aviation Organization (ICAO) Technical Instructions.

Technologies des piles à combustible - Partie 6-107: Systèmes à micropiles à combustible - Sécurité - Composés hydroréactifs indirects (Division 4.3)

IEC 62282-6-107:2024 traite des systèmes à micropiles à combustible, des unités d’alimentation électrique des micropiles à combustible et des cartouches de combustible qui utilisent comme combustible l’hydrogène produit à partir de composés hydroréactifs (division 4.3 des Nations Unies). Ces systèmes et unités d’alimentation utilisent des technologies de piles à combustible à membrane à échange de protons (PEM, Proton Exchange Membrane). Les conceptions peuvent inclure des sous-systèmes de traitement de combustibles pour obtenir un gaz hydrogène à partir de la formulation hydroréactive d’un combustible. Le présent document ne s’applique qu’aux composés solides hydroréactifs (division 4.3 des Nations Unies) qui dégagent uniquement du gaz hydrogène au contact de l’eau (ou de solutions aqueuses non dangereuses). Le présent document ne s’applique pas aux composés présentant un risque de danger subsidiaire ou dont le transport aérien n’est pas autorisé conformément aux Instructions techniques de l’Organisation de l’aviation civile internationale (OACI).

Tehnologije gorivnih celic - 6-107. del: Elektroenergetski sistemi z mikro gorivnimi celicami - Varnost - Trdne spojine, ki reagirajo z vodo (del 4.3)

General Information

Status
Not Published
Publication Date
16-May-2024
Drafting Committee
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
22-Dec-2023
Completion Date
22-Dec-2023

Buy Standard

Draft
prEN IEC 62282-6-107:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62282-6-107:2023
01-marec-2023
Tehnologije gorivnih celic - 6-107. del: Elektroenergetski sistemi z mikro gorivnimi
celicami - Varnost - Trdne spojine, ki reagirajo z vodo (del 4.3)
Fuel cell technologies - Part 6-107: Micro fuel cell power systems - Safety - Indirect
water-reactive (Division 4.3) compounds
Ta slovenski standard je istoveten z: prEN IEC 62282-6-107:2022
ICS:
27.070 Gorilne celice Fuel cells
oSIST prEN IEC 62282-6-107:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62282-6-107:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62282-6-107:2023
105/951/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62282-6-107 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-23 2023-03-17
SUPERSEDES DOCUMENTS:
105/809/CD, 105/823/CC

IEC TC 105 : FUEL CELL TECHNOLOGIES
SECRETARIAT: SECRETARY:
Germany Mr David Urmann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware
and to provide supporting documentation.

TITLE:
Fuel cell technologies – Part 6-107: Micro fuel cell power systems – Safety – Indirect water-reactive (Division 4.3)
compounds

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62282-6-107:2023
– 2 – IEC CDV 62282-6-107  IEC 2022
CONTENTS

FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
1.1 Fuels and technologies covered by this part . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Safety Principles. 7
5 General safety requirements . 7
5.1 General . 7
5.2 Chemical Safety Requirements . 7
5.3 Material requirements . 8
5.4 Mechanical design requirements . 8
5.4.1 General . 8
5.4.2 Micro fuel cell power system . 9
5.4.3 Fuel cartridge . 9
5.4.4 Fuel valves and connections . 9
5.4.5 Electrical requirements . 9
5.4.6 FMEA . 9
5.4.7 Functional safety requirements . 9
5.4.8 Small parts . 9
6 Abnormal operating and fau
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.