EN 60061-3:1993/A53:2017
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 3. del: Kalibri - Dopolnilo A53 (IEC 60061-3:1969/A53:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60061-3:2000/A53:2018
01-maj-2018
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 3. del: Kalibri - Dopolnilo A53 (IEC 60061-
3:1969/A53:2017)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 3: Gauges (IEC 60061-3:1969/A53:2017)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 3: Lehren (IEC 60061-3:1969/A53:2017)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 3: Calibres (IEC 60061-3:1969/A53:2017)
Ta slovenski standard je istoveten z: EN 60061-3:1993/A53:2017
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-3:2000/A53:2018 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60061-3:2000/A53:2018
---------------------- Page: 2 ----------------------
SIST EN 60061-3:2000/A53:2018
EUROPEAN STANDARD EN 60061-3:1993/A53
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3: Gauges
(IEC 60061-3:1969/A53:2017)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 3: der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Calibres (IEC 60061-3:1969/A53:2017)
(IEC 60061-3:1969/A53:2017)
This amendment A53 modifies the European Standard EN 60061-3:1993; it was approved by CENELEC on 2017-06-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-3:1993/A53:2017 E
---------------------- Page: 3 ----------------------
SIST EN 60061-3:2000/A53:2018
EN 60061-3:1993/A53:2017
European foreword
The text of document 34B/1896/FDIS, future IEC 60061-3:1969/A53, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60061-3:1993/A53:2017.
The following dates are fixed:
(dop) 2018-03-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-06-20
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60061-3:1969/A53:2017 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60061-3:2000/A53:2018
NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-3
STANDARD
AMENDEMENT 53
AMENDMENT 53
2017-05
Amendement 53
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 3:
Calibres
Amendment 53
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges
Les feuilles de cet amendement sont à insérer dans
l'IEC 600613 (1969)
The sheets contained
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.